锥形透镜光纤聚焦特性研究

锥形透镜光纤(TLF)是实现光纤与平面光波光路(PLC)芯片高效耦合的核心元件。了解和掌握其聚焦特性是指导平面光波光路尾纤封装技术的关键。给出了表征锥形透镜光纤聚焦特性的两个参量出射光斑直径和远场发散角的理论分析模型,其误差小于1.14%;采用光束传播法数值模拟了锥形透镜光纤中的光波传输和模斑的演化,确定了锥形透镜光纤端面出射光斑的大小;优化锥形透镜光纤结构参量为:拉锥长度300μm,锥角0.733°,透镜曲率半径13.485μm;建立了基于数字摄像机的锥形透镜光纤出射光场测试系统,提出了物理光学反向推演法,计算出锥形透镜光纤聚焦光斑尺寸和远场发散角。理论与实验结果有着良好的一致:对于相同结构参量的锥形透镜光纤,实验反推法得到的出射光斑尺寸与理论值相比误差为3.15%,远场发散角误差为3.67%。     

A solution of the DGLAP equation for gluon at low x

We obtain a solution of the DGLAP equation for the gluon at low x first by expanding the gluon in a Taylor series and then using the method of characteristics. We test its validity by comparing it with that of Glück, Reya and Vogt. The convergence criteria of the approximation used are also discussed. We also calculate εF ₂(x,Q)²/ε In Q ² using its approximate relations with the gluon distribution at low x. The predictions are then compared with the HERA data.     

空心阴极灯激发的微波等离子体炬原子/离子荧光光谱研究--钙的原子/离子荧光光谱

用强短脉冲供电技术的空心阴极灯作激发源、微波等离子体炬作原子／离子化器，建立了原子／离子荧光光谱实验装置。详细研究了微波等离子体功率、观察高度、空心阴极灯电流等因素对原子／离子荧光信号强度的影响，测量了系统对Ca的原子／离子荧光光谱的检出限。     

行波型热声发动机的分布参数法热力分析

在现有热声网络模型的基础上 ,对行波型热声发动机采用分布参数法进行了详细地分析 ,得到了较为完整的分布参数法网络模型 ,并给出了该模型的定性关系式 ,所得结果与采用集总参数法的结果有很大差异。分析表明 ,分布参数法更适合于一般的系统情况 ,集总参数法仅仅在一定条件下才适用。文中对一个实际系统应用分布参数法进行了分析 ,得到一些结论 ,对于我们设计行波型热声发动机有非常重要的理论指导意义     

Transport as a consequence of state-dependent diffusion

Overdamped particles subject to a drift in a force field with sinusoidal space dependence and also a sinusoidally modulated space-dependent diffusion, with the same period as the drift, experience a net driving force. The resulting current depends on the amplitude of the modulation of the diffusion and is a periodic function of the phase difference between the sinusoidal drift and the sinusoidal modulation of the diffusion. For small modulation amplitudes a particle subject to state-dependent noise behaves the same way as a particle subject to thermal noise but with a drift which, in addition to the sinusoidal term, contains a net force term [M. Büttiker,Z. Phys. B 68:161 (1987)]. A specific example of this behavior [N. G. van Kampen,IBM J. Res. Dev. 32:107 (1988); R. Landauer,J. Stat. Phys. 53:233 (1988).] is the motion of overdamped particles in a ring subject to a nonuniform temperature field. When the drift and the temperature, which are periodic with a period equal to the ring circumference, are not in phase a noise-induced circulating current results.This paper will appear in a forthcoming issue of theJournal of Statistical Physics.     

基于LabVIEW的高温超导材料特性测试实验

高温超导体临界特性的测量是近代物理实验中最为经典的实验之一,本文通过使用GM制冷机,利用Lab-VIEW虚拟仪器软件和高性能采集卡,改进了传统的测量高温超导材料临界特性的实验装置.本测试系统不仅可以测量高温超导体在不同温度下的临界电流,还可以测量其失超传播特性.该实验对于学生了解超导体特性和培养严谨的科学作风十分有益.     

方形自聚焦透镜的研制

经过方形玻璃丝的加工、离子交换及成品的精密加工等过程，成功制出了方形自聚焦透镜.并采用聚焦成像和雅明干涉等方法对其光学特性进行测试，得出了方形自聚焦透镜本身所具有的一些特性：中心部分畸变较小，成像性能好；四个棱角内的球差较大，像质较差;折射率分布不具有旋转对称性，而是与方向和半径有关.     

Nd(Fe,Si)11Cx化合物的全电子计算(x=0,2)

采用基于第一原理的全势能线性缀加平面波加局域轨道((L)APW lo)方法对Nd(Fe,Si)11Cx化合物(x=0,2)的电子结构进行了计算,得到了化合物态密度和磁矩等信息.计算结果表明NdFe9Si2化合物中Si原子主要与4b和32i位Fe原子产生杂化,导致Fe原子磁矩减小.NdFe9Si2C2化合物C原子使32i位Fe原子磁矩进一步降低,同时减弱了Si原子的影响,使得4b位Fe原子磁矩增大.     

折衍混合复消色差望远物镜设计的PWC方法

将衍射结构视为折射率无限大的薄透镜，研究了衍射透镜高折射率表示的折衍混合复消色差望远物镜设计的PWC方法；设计了焦距为2000mm、相对孔径为1/15的双片型折衍混合复消色差望远物镜，并与常规三片型纯折射复消色差望远物镜进行了比较，结果表明双片型折衍混合复消色差望远物镜具有更好的二级光谱校正能力，色球差更小，因此具有更好的成像质量.     

A modified predictor–corrector scheme for the two-dimensional sine-Gordon equation

A three-time level finite-difference scheme based on a fourth order in time and second order in space approximation has been proposed for the numerical solution of the nonlinear two-dimensional sine-Gordon equation. The method, which is analysed for local truncation error and stability, leads to the solution of a nonlinear system. To avoid solving it, a predictor–corrector scheme using as predictor a second-order explicit scheme is proposed. The procedure of the corrector has been modified by considering as known the already evaluated corrected values instead of the predictor ones. This modified scheme has been tested on the line and circular ring soliton and the numerical experiments have proved that there is an improvement in the accuracy over the standard predictor–corrector implementation. This research was co-funded by E.U. (75%) and by the Greek Government (25%).