横观各向同性圆柱体自由振动的弹性力学解

本文由横观各向同性的弹性力学方程出发，研究有限长圆柱体的自由振动问题。利用文献「１」的通解，将位移分量和应力分量分别表达成傅里叶－塞尔级数和双曲－贝塞尔级数的形式。通过边界条件和级数的正交关系，得到关于有限长圆柱自由振动频率的特征方程。利用数值方法求解特征根，从而得到圆柱体三维振动的自振频率。     

Synthesis and characterization of magnetic polymer microspheres with a core-shell structure

Non-porous magnetic polymer microspheres with a core-shell structure were prepared by a novel micro-suspension polymerization technique. A stable iron oxide ferrofluid was used to supply the magnetic core, and the polymeric shell was made of glycidyl methacrylate （GMA monomer） and ethylene dimethacrylate （cross-linker）. In the preparation, polyvinyl alcohol was used as the stabilizer, and a lauryl alcohol mixture as the dispersant. The influence of various conditions such as aqueous phase volume, GMA and initiator amounts, reaction time and stirring speed on the character of the microspheres was investigated. The magnetic microspheres were then characterized briefly. The results indicate that the microspheres with active epoxy groups had a narrow size distribution range from 1 to 10 μm with a volume-weighted mean diameter of 4.5 μm. The saturation magnetization reached 19.9 emu/g with little coercivity and remanence.     

床面固体颗粒圆柱绕流的试验现象观察

本文介绍了床面固体颗粒随水流绕过圆柱体时，将在圆柱周围的床面上形成一个无粒子运动区的试验现象。水槽试验结果表明，当固体颗粒的粒径减小时，无粒子区的范围将增大；无粒子区的范围随圆柱直径的增大而增大；水流条件的变化直接影响着床面固体颗粒的运动情况，同无粒子区的形成、消失及范围大小有密切的关系。根据试验资料，结合量纲分析，建立了无粒子区的无量纲经验关系式     

Vortex structure generation on the frontal surface of a cylinder set transversely in a hypersonic flow

The problem of formation of spatially periodic structures on the frontal surface of a cylindrically blunted body set transversely in a hypersonic flow is studied. Within the framework of the model adopted, a possible mechanism of vortex structure generation on the frontal surface of the blunt body is proposed and confirmed by calculations; in this mechanism, the curved bow shock produces a vortex flow, while in its turn the vortex, which persists under weak dissipation, acts on the shock thus maintaining its curved shape. It is shown that the spatially periodic mode of hypersonic flow past a cylinder can exist in the case of a uniform incident flow and under homogeneous boundary conditions on the body surface.     

入射涡与圆柱相互作用的数值模拟

本文用快速涡方法对入射涡与圆柱的相互作用进行了数值模拟,观察到了入射涡在圆柱表面上诱导的二次分离和三次分离现象。二次涡的产生,与入射涡配对,改变了它们的运动轨迹。二次涡是入射涡“回跳”现象的主要原因。本文还对不同入射涡强度及相互位置作了计算,并分析了不同参数对涡运动轨迹的影响。这些现象与涡的无粘圆柱绕流有着本质的差异。     

粘弹性厚壁筒问题的辛本征解方法

将哈密顿体系引进到粘弹性力学厚壁筒问题中,在辛体系下重新描述了基本问题,即建立了正则方程组。借助于积分变换,得到了拉伸、扭转和弯曲等问题的解以及有边界局部效应的解。将原问题归结为辛几何空间中的零本征值本征解和非零本征值本征解问题,从而建立了一种有效的分析问题方法和数值方法。为解决同类问题提供了一条可行的路径。     

Modeling the effect of diffusion of the ambient medium on the long-term strength of a hollow cylinder under uniaxial tension

The problem of the long-term strength of an extended thick-walled tube containing a corrosive medium in the internal cavity is solved. The diffusion of this medium into the tube material is analyzed. The diffusion equation is solved approximately by introducing the diffusion front, and the error of the solution is estimated. The dependence of the time of fracture of the tube on the variable tensile stress and the concentration of the medium filling the cavity is obtained. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 48, No. 4, pp. 88–93, July–August, 2007.     

An analytical solution for the velocity and shear rate distribution of non-ideal Bingham fluids in concentric cylinder viscometers

An analytical solution is presented for the calculation of the flow field in a concentric cylinder viscometer of non-ideal Bingham-fluids, described by the Worrall-Tuliani rheological model. The obtained shear rate distribution is a function of the a priori unknown rheological parameters. It is shown that by applying an iterative procedure experimental data can be processed in order to obtain the proper shear rate correction and the four rheological parameters of the Worrall-Tuliani model as well as the yield surface radius. A comparison with Krieger's correction method is made. Rheometrical data for dense cohesive sediment suspensions have been reviewed in the light of this new method. For these suspensions velocity profiles over the gap are computed and the shear layer thicknesses were found to be comparable to visual observations. It can be concluded that at low rotation speeds the actually sheared layer is too narrow to fullfill the gap width requirement for granular suspensions and slip appears to be unavoidable, even when the material is sheared within itself. The only way to obtain meaningfull measurements in a concentric cylinder viscometer at low shear rates seems to be by increasing the radii of the viscometer. Some dimensioning criteria are presented.Notation A, B Integration constants - C Dimensionless rotation speed = µ/_y - c = 2µ - d = ₀ ²–2c_y - f() = (–₀)²+2c(–_y) - r Radius - r _b Bob radius - r _c Cup radius - r _y Yield radius - r ₀ Stationary surface radius - r Rotating Stationary radius - Y ₀ Shear rate parameter = /µ Greek letters Shear rate - = (r _y /r _b )²– 1 - µ Bingham viscosity - µ₀ Initial differential viscosity - µ µ₀-µ - Rotation speed - Angular velocity - Shear stress - _b Bob shear stress - _B Bingham stress - _y (True) yield stress - ₀ Stress parameter = _B +µ Y ₀ - _B - _y      

Further study on vortex shedding flow by a circular cylinder

In the present paper the mechanism involved in vortex shedding flows is investigated in detail. In the early stage of the unsteady separated flow the interaction between secondary vortices and primary vortices is quite strong. In the later stage of the flow, corresponding to the vortex shedding the recirculating flow region on each side of the aft body goes through such a cycle: growth-contraction-growth, the secondary separation occurs periodically rather than continuously. The reduction of circulation is taken into account in three cases with different decay factors to study its influence on the prediction of main flow characteristics. Results show that to simulate vortex shedding flow it is necessary to include the reduction of circulation to bring the calculated results into good agreement with experiments. An improved discrete vortex model is suggested in which both the secondary separation and the reduction are incorporated. The processes of vortex shedding, the forces prediction and other flow characteristics are given and some discussions are made. Porject is supported by National Natural Science Foundation of China.     

Elastodynamic solution of a non-homogeneous orthotropic hollow cylinder

A theoretical method for analyzing the axisymmetric plane strain elastodynamic problem of a non-homogeneous orthotropic hollow cylinder is developed. Firstly, a new dependent variable is introduced to rewrite the governing equation, the boundary conditions and the initial conditions. Secondly, a special function is introduced to transform the inhomogeneous boundary conditions to homogeneous ones. By virtue of the orthogonal expansion technique, the equation with respect to the time variable is derived, of which the solution can be obtained. The displacement solution is finally obtained, which can be degenerated in a rather straightforward way into the solution for a homogeneous orthotropic hollow cylinder and isotropic solid cylinder as well as that for a non-homogeneous isotropic hollow cylinder. Using the present method, integral transform can be avoided and it can be used for hollow cylinders with arbitrary thickness and subjected to arbitrary dynamic loads. Numerical results are presented for a non-homogeneous orthotropic hollow cylinder subjected to dynamic internal pressure. The project supported by the National Natural Science Foundation of China (10172075 and 10002016)