Energetic Salts Based on an Oxygen‐Containing Cation: 2,4‐Diamino‐1,3,5‐triazine‐6‐one

A family of energetic salts with high thermal stability and low impact sensitivity based on an oxygen‐containing cation, 2,4‐diamino‐1,3,5‐triazine‐6‐one, were synthesized and fully characterized by IR and multinuclear (¹H, ¹³C) NMR spectroscopy, elemental analysis, and differential scanning calorimetry. Insights into their sensitivities towards impact, friction, and electrostatics were gained by submitting the materials to standard tests. The structures of 2,4‐diamino‐1,3,5‐triazine‐6‐one nitrate, 2,4‐diamino‐1,3,5‐triazine‐6‐one sulfate, 2,4‐diamino‐1,3,5‐triazine‐6‐one perchlorate, 2,4‐diamino‐1,3,5‐triazine‐6‐one 5‐nitrotetrazolate were determined by single‐crystal X‐ray diffraction; their densities are 1.691, 1.776, 1.854, and 1.636 g cm^?3, respectively. Most of the salts decompose at temperatures over 180 °C; in particular, the salts 2,4‐diamino‐1,3,5‐triazine‐6‐one nitrate and 2,4‐diamino‐1,3,5‐triazine‐6‐one perchlorate, which decompose at 303.3 and 336.4 °C, respectively, are fairly stable. Furthermore, most of the salts exhibit excellent impact sensitivities (>40 J), friction sensitivities (>360 N), and are insensitive to electrostatics. The measured densities of these energetic salts range from 1.64 to 2.01 g cm^?3. The detonation pressure values calculated for these salts range from 14.6 to 29.2 GPa, and the detonation velocities range from 6536 to 8275 m s^?1; these values make the salts potential candidates for thermally stable and insensitive energetic materials.     

Nucleophile‐Dependent Regio‐ and Stereoselective Ring Opening of 1‐Azoniabicyclo[3.1.0]hexane Tosylate

1‐[(1R)‐(1‐Phenylethyl)]‐1‐azoniabicyclo[3.1.0]hexane tosylate was generated as a stable bicyclic aziridinium salt from the corresponding 2‐(3‐hydroxypropyl)aziridine upon reaction with p‐toluenesulfonyl anhydride. This bicyclic aziridinium ion was then treated with various nucleophiles including halides, azide, acetate, and cyanide in CH₃CN to afford either piperidines or pyrrolidines through regio‐ and stereoselective ring opening, mediated by the characteristics of the applied nucleophile. On the basis of DFT calculations, ring‐opening reactions under thermodynamic control yield piperidines, whereas reactions under kinetic control can yield both piperidines and pyrrolidines depending on the activation energies for both pathways.     

Hydrogen bonding in 4‐nitrobenzene‐1,2‐diamine and two hydrohalide salts

The structures of 4‐nitrobenzene‐1,2‐diamine [C₆H₇N₃O₂, (I)], 2‐amino‐5‐nitroanilinium chloride [C₆H₈N₃O₂⁺·Cl⁻, (II)] and 2‐amino‐5‐nitroanilinium bromide monohydrate [C₆H₈N₃O₂⁺·Br⁻·H₂O, (III)] are reported and their hydrogen‐bonded structures described. The amine group para to the nitro group in (I) adopts an approximately planar geometry, whereas the meta amine group is decidedly pyramidal. In the hydrogen halide salts (II) and (III), the amine group meta to the nitro group is protonated. Compound (I) displays a pleated‐sheet hydrogen‐bonded two‐dimensional structure with R₂²(14) and R₄⁴(20) rings. The sheets are joined by additional hydrogen bonds, resulting in a three‐dimensional extended structure. Hydrohalide salt (II) has two formula units in the asymmetric unit that are related by a pseudo‐inversion center. The dominant hydrogen‐bonding interactions involve the chloride ion and result in R₄²(8) rings linked to form a ladder‐chain structure. The chains are joined by N—H...Cl and N—H...O hydrogen bonds to form sheets parallel to (010). In hydrated hydrohalide salt (III), bromide ions are hydrogen bonded to amine and ammonium groups to form R₄²(8) rings. The water behaves as a double donor/single acceptor and, along with the bromide anions, forms hydrogen bonds involving the nitro, amine, and ammonium groups. The result is sheets parallel to (001) composed of alternating R₅⁵(15) and R₆⁴(24) rings. Ammonium N—H...Br interactions join the sheets to form a three‐dimensional extended structure. Energy‐minimized structures obtained using DFT and MP2 calculations are consistent with the solid‐state structures. Consistent with (II) and (III), calculations show that protonation of the amine group meta to the nitro group results in a structure that is about 1.5 kJ mol⁻¹ more stable than that obtained by protonation of the para‐amine group. DFT calculations on single molecules and hydrogen‐bonded pairs of molecules based on structural results obtained for (I) and for 3‐nitrobenzene‐1,2‐diamine, (IV) [Betz & Gerber (2011). Acta Cryst. E 67 , o1359] were used to estimate the strength of the N—H...O(nitro) interactions for three observed motifs. The hydrogen‐bonding interaction between the pairs of molecules examined was found to correspond to 20–30 kJ mol⁻¹.     

Synthesis and Conformation of 3,6‐Connected Cyclohexadiene Chains

3,6‐Connected cyclohexadienes as precursors for polyphenylenes are synthesized and characterized by mass spectrometry and NMR spectroscopy. Pure fractions of trimers, hexamers, and nonamers are collected after separation of the product mixture by recycling GPC. The anticipated formation of rigid linear structures, due to the trans‐configuration of the monomeric units, is supported by density functional theory and experimentally confirmed by dynamic light scattering from dilute solution at low scattering angles. The obtained translational diffusion coefficients are represented by rigid rod‐like or prolate ellipsoid‐like molecular shapes. The measurements of diffusion coefficients reveal a length‐dependent ratio of 1:2:3 between the three oligomers, which directly correlates to the expected length extension from trimer to nonamer.

     

高中化学竞赛中电子效应和空间效应考点分析——以近年全国化学奥林匹克竞赛试题为例

电子效应和空间效应是有机化学的基础,近年来,这部分知识在全国化学奥林匹克竞赛中的考查比例处于上升趋势。因此,以近年全国化学奥林匹克竞赛试题为例,详细说明电子效应和空间效应在竞赛中的考点,帮助辅导化学竞赛的教师和参加化学竞赛的考生了解该部分知识需要达到的教学标准和掌握层次。     

基于奥苏贝尔学习理论对人教版和鲁科版高中化学教材“化学键”的比较及建议

以奥苏贝尔学习理论为基础,比较人教版与鲁科版化学教材“化学键”内容,对教材的引言、正文编排顺序、正文内容组织、正文栏目、插图、习题等进行分析,并从奥苏贝尔学习理论角度阐述教材编写及教学建议。     

·OH自由基引发CH3SSCH3•+自由基裂解反应机理的理论研究

采用UωB97X-D/6-311+G^**方法, 研究了气相、 甲苯和水中OH自由基(·OH)引发CH₃SSCH₃自由基阳离子(CH₃SSC{\mathrm{H}}_{\mathrm{3}}^{?}⁺, DMDS^?+)裂解的反应机理, 并讨论了溶剂效应对反应的影响. 结果表明, ·OH和DMDS^·+首先形成自由基耦合产物CH₃S(OH)SCH₃⁺(R1)和氢提取产物复合物[CH₂=SSCH₃+H₂O]⁺(R2); 随后R1裂解直接发生 S—S键断裂协同质子转移, 而R2裂解依次发生构象变化、 C=S键亲碳加成和S—S键断裂协同质子转移. 去质子化的裂解产物为CH₃SOH, CH₂=S和HSCH₂OH. 甲苯略微降低了裂解反应速控步骤的自由能垒. 水溶剂有利于R1裂解, 但不利于R2裂解, 尤其是单个水分子参与反应. 在气相、 甲苯和水中, 以·OH和DMDS^·+为初始反应物, 虽然速控步骤的自由能垒为167.6~202.8 kJ/mol, 但裂解反应均是放热反应(?154.3~?31.4 kJ/mol).