Thermosensitive and control release behavior of poly (N‐isopropylacrylamide‐co‐acrylic acid) latex particles

In this work, poly(N‐isopropylacrylamide‐co‐acrylic acid) (poly(NIPAAm‐AA)) copolymer latex particles (microgels) were synthesized by the method of soapless emulsion polymerization. Poly(NIPAAm‐AA) copolymer microgels have the property of being thermosensitive. The concentration of acrylic acid (AA) and crosslinking agent N,N′‐methylenebisacrylamide were important factors to influence the lower critical solution temperature (LCST) of poly(NIPAAm‐AA) microgels. The effects of AA and crosslinking agent on the swelling behavior of poly(NIPAAm‐AA) microgels were also studied. The poly(NIPAAm‐AA) copolymer microgels were then used as a thermosensitive drug carrier to load caffeine. The effects of concentration of AA and crosslinking agent on the control release of caffeine were investigated. How the AA content and crosslinking agent influenced the morphology and LCST of the microgels was discussed in detail. The relationship of morphology, swelling, and control release behavior of these thermosensitive microgels was established. A new scheme was proposed to interpret the control release of the microgels with different morphological structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5734–5741, 2008     

Ethylene polymerization and copolymerization with a polar monomer using an α‐iminocarboxamide nickel complex activated by trimethylaluminum

An α‐iminocarboxamide nickel complex was activated by trimethylaluminum (TMA) and used in the polymerization of ethylene and its copolymerization with 10‐undecen‐1‐ol. The best activity was observed upon activation with 9 equiv of TMA at a temperature of 26 °C. NMR spectroscopic studies did not show 10‐undecen‐1‐ol incorporation. However, FTIR analyses suggest the incorporation of a very small amount of comonomer, which affects the glass transition temperature, the degree of branching, and the mechanical properties of the materials. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 54–59, 2008     

Styrene/1,3‐butadiene copolymerization by C2‐symmetric group 4 metallocenes based catalysts

C₂‐symmetric group 4 metallocenes based catalysts (rac‐[CH₂(3‐tert‐butyl‐1‐indenyl)₂]ZrCl₂ (1) , rac‐[CH₂(1‐indenyl)₂]ZrCl₂ (2) and rac‐[CH₂(3‐tert‐butyl‐1‐indenyl)₂]TiCl₂ (3) ) are able to copolymerize styrene and 1,3‐butadiene, to give products with high molecular weight. In agreement with symmetry properties of metallocene precatalysts, styrene homosequences are in isotactic arrangements. Full determination of microstructure of copolymers was obtained by ¹³C NMR and FTIR analysis and it reveals that insertion of butadiene on styrene chain‐end happens prevailingly with 1,4‐trans configuration. In the butadiene homosequences, using zirconocene‐based catalysts, the 1,4‐trans arrangement is favored over 1,4‐cis, but the latter is prevailing in the presence of titanocene (3) . Diad composition analysis of the copolymers makes possible to estimate the reactivity ratios of copolymerization: zirconocenes (1) and (2) produced copolymers having r₁ × r₂ = 0.5 and 3.0, respectively (where 1 refers to styrene and 2 to butadiene); while titanocene (3) gave tendencially blocky styrene–butadiene copolymers (r₁ × r₂ = 8.5). The copolymers do not exhibit crystallinity, even when they contain a high molar fraction of styrene. Probably, comonomer homosequences are too short to crystallize (n_s = 16, in the copolymer at highest styrene molar fraction). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1476–1487, 2008     

Chemistry of olefin polymerization reactions with chromium‐based catalysts

Detailed GC analysis of oligomers formed in ethylene homopolymerization reactions, ethylene/1‐hexene copolymerization reactions, and homo‐oligomerization reactions of 1‐hexene and 1‐octene in the presence of a chromium oxide and an organochromium catalyst is carried out. A combination of these data with the analysis of ¹³C NMR and IR spectra of the respective high molecular weight polymerization products indicates that the standard olefin polymerization mechanism, according to which the starting chain end of each polymer molecule is saturated and the terminal chain end is a C?C bond (in the absence of hydrogen in the polymerization reactions), is also applicable to olefin polymerization reactions with both types of chromium‐based catalysts. The mechanism of active center formation and polymerization is proposed for the reactions. Two additional features of the polymerization reactions, co‐trimerization of olefins over chromium oxide catalysts and formation of methyl branches in polyethylene chains in the presence of organochromium catalysts, also find confirmation in the GC analysis. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5330–5347, 2008     

Copolymerization of methacrylonitrile with p-methylstyrene

Methacrylonitrile was copolymerized with p-methylstyrene in methyl ethyl ketone at 80°C initiated by azobisisobutyronitrile. Monomer reactivity ratios of methacrylonitrile and p-methylstyrene were found to be 0.205 and 0.377, respectively, using the Kelen-Tüdos method. Triad fractions and monomer sequence lengths of three copolymers were determined from ¹³C-NMR spectra and were found to be in good agreement with those calculated from reactivity ratios. © 1994 John Wiley & Sons, Inc.     

Ion‐exchange resins. III. Functionalization–morphology correlations in the synthesis of some macroporous,strong basic anion exchangers and uranium‐sorption properties evaluation

The synthesis and characterization of a series of macroporous, strong basic anion exchangers (SBAEs), with an average pore radius higher than 50 nm, and the evaluation of their sorption properties for uranyl chlorocomplexes from HCl solutions are reported. Finely divided macroporous styrene–divinylbenzene (S–DVB) copolymers with a narrow distribution of beads sizes, diameters within the range of 90–200 μm, were prepared for this purpose with 2‐ethyl‐1‐hexanol as a porogen, at a high dilution of monomers (D ≥ 0.55 mL/mL). Chloromethyl groups were introduced with (CH₂O)_n/Me₃SiCl as a chloromethylation agent in the presence of a Lewis acid as a catalyst (TiCl₄, SnCl₄, and FeCl₃) in CHCl₃ as a reaction medium. SnCl₄ and FeCl₃ gave comparable chloromethylation degrees in the same reaction conditions. TiCl₄ was not efficient as a catalyst in the chloromethylation with this reagent. Diethyl‐2‐hydroxyethylamine was used as a tertiary amine to prepare SBAEs. Structural and morphological characteristics were determined after every functionalization step of the macroporous network. Both the chloromethylation, in the presence of FeCl₃ as a catalyst, and the amination reactions determined a significant decrease of the pore volume, in the whole range of the nominal crosslinking degree, comparative with the starting copolymer. The specific surface area and the average pore radius varied in a different way as a function of the nominal crosslinking degree. Thus, the specific surface area increased and the average pore radius decreased after chloromethylation and amination for copolymers with a DVB content lower than 10 wt %. Small decreases of the specific surface area and the average pore radius were observed after chloromethylation and amination reactions for copolymers with a DVB content higher than 10 wt %. SBAEs were also characterized by thermogravimetric analysis and sorption capacity for uranyl chlorocomplexes. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2451–2461, 2004     

Cationic ring‐opening copolymerization behavior of trioxane and seven‐membered cyclic carbonate

Cationic ring‐opening copolymerization behavior of trioxane (TOX) and a seven‐membered cyclic carbonate, 1,3‐dioxepan‐2‐one (7CC) is described. When TOX and 7CC were cationically copolymerized under various feed ratios using trifluoromethane sulfonic acid (TfOH) as an initiator in nitrobenzene at 30 °C, 7CC was consumed faster than TOX and the decarboxylation was accompanied to afford the corresponding polyacetal–polycarbonate type copolymers containing poly(oxytetramethylene) units. The copolymer composition could be controlled by the feed ratio of 7CC, whose increase resulted in the high copolymer composition of the 7CC unit. The solubility of the copolymers increased as the increase of the 7CC content. Thermogravimetric, size‐exclusion chromatographic, and X‐ray analyses of the copolymers suggest that the sequences of the copolymer chains consist of the segments containing the units originated from 7CC and those with TOX unit‐rich compositions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 733–739, 2008