Magnetorheological suspension electromagnetic brake

The magnetorheological suspension (MRS) brake is of the monoblock type. The main part of the electromagnetic brake is an electromagnet, between whose poles two MRS disks are placed. For distances between disks of 0.65×10⁻³ m±10%, revolutions of the electric motor, coupled to the electromagnetic brake, ranging between 200 and 1600 rev/min and braking powers of up to 85 W, there are no differences in revolutions between the disks of the electromagnetic brake. For fixed revolutions of the electric motor, the revolution of the parallel disk can be modified continuously by means of the intensity of the magnetic field. In all cases, the quantity of MRS is of 0.35×10⁻³ kg.     

四分之一超导谐振腔的仿真对比

超导量子电路已成为实现量子计算机的主流技术路线之一, 其中四分之一波长超导谐振腔主要用于读取量子比特的状态信息, 是实现超导量子电路的关键器件. 本文设计了四分之一波长超导谐振腔, 利用两种电磁仿真算法(有限元法以及矩量法) , 对超导谐振腔的传输特性进行建模仿真验证. 制备出了设计的超导谐振腔样品, 在20±5 mK 的低温环境下对其传输特性进行测量. 通过仿真结果与设计值和实测值进行对比研究, 发现基于矩量法的 sonnet 软件在仿真准确性、 仿真速率以及资源消耗等方面都优于基于有限元法的 HFSS 软件. 同时研究了谐振腔之间的串扰对仿真精度的影响, 当谐振腔数目不多时, 其相互之间串扰的影响几乎可以忽略.     

A novel electromagnetic induction detector with a coaxial coil for capillary electrophoresis

A novel electromagnetic induction detector with two inductors for CE was described here.The two inductors were used as signal detection and reference,respectively.The parameters affecting the detector performance(including coil turns,detection distance, excitation frequency,voltage,etc.) were optimized.Under the optimum condition,the feasibility of the detector was examined by analyzing inorganic ions.The fabricated detector showed good linear relationship between the response and the analytes concentrations,with a detection limit of 13μmol/L for Na~+(S/N = 3).A variety of advantages,such as simple construction, ease of operation,and considerably universal response,suggested this novel detector a promising application prospect in analytical area.     

Doping effect of Y ions on the microstructural and electromagnetic properties of Mn-Zn ferrites

Mn-Zn ferrites doped with different contents of Y³⁺ ions were prepared by conventional two-step synthesis method. The microstructure and electromagnetic properties of the as-prepared Mn-Zn ferrites were investigated. It was found that all the samples consisted of ferrite phases of typical spinel cubic structure, and when Y³⁺ ion content was upto 1.5 mol%, yttriumirongarnet (Y₃Fe₅O₁₂) phase with garnet structure was detected. With increasing doping content of Y³⁺ ions, the lattice constant and grain size increased, and after an increase to its maximum value, the sample apparent and relative densities dropped down. Through the analysis of magnetic properties, it was revealed that the saturation magnetization, and both the real and imaginary parts of permeability of the as-prepared samples raised with increasing doping content of Y³⁺ ions but decreased with more Y³⁺ ions, while their coercivity showed an opposite change trend; and the Curie temperature increased monotonously. The measurement of dielectric properties indicated that the dielectric constant of the doped Mn-Zn ferrites presented a rise with increasing Y³⁺ ion content, and dropped down gradually when more Y³⁺ ions were doped, while the dielectric loss tangent would decrease with Y³⁺ content upto 1.5 mol%, but after that, it increased.     

The modelling of an electromagnetic energy harvesting architecture

In this paper a detailed mathematical model for an electromagnetic energy harvesting architecture based on a semi-analytical approach is introduced. This model estimates the generated energy of the architecture by computing the static and dynamic magnetic and electric fields that describe its dynamics. A comparison of the static fields with the results of a Finite Element Analysis simulation in COMSOL Multiphysics shows good agreement. The model also features increased accuracy and numerical stability. In the model the semi-analytical solutions for the electromagnetic damping force exerted by the induced current coil and the induced electromotive force on the coil provide additional insight into the interactions of electromagnetic induction and damping. Additionally, the energy estimation could be used as a figure of merit in an maximization process to identify the optimal dimensions of the energy harvester.     

双驱动电动换能器电磁场和声-结构耦合场分析

电动换能器的设计涉及电磁场和声-结构耦合问题,本文利用COMSOL多物理场分析软件提供的该两种分析模块进行组合,以电磁理论为基础推导出了适合COMSOL数值计算的公式,把两种耦合场的分析结合起来,利用电磁场分析过程计算所需要变量,代入声-结构耦合场进行分析,得到声场分布情况。文章也大致介绍了COMSOL的有限元建模和该两种模块的使用方法。本文对电动换能器结构如何优化不做讨论。     

一维光子晶体斜入射波包的带隙结构

对波包的任意傅里叶分量进行坐标变换后,利用转移矩阵法推导出波包斜入射情形下一维光子晶体的色散关系表达式,利用色散关系曲线分析得出波包斜入射的第一带隙结构,与以往平面波的第一带隙结构不同,波包的带隙宽度小于平面波的带隙宽度,并且在位置上前者带隙包含在后者内部.比较了一维光子晶体分别在波包入射与平面波入射情形下带隙位置和宽度,分析了波包中心入射角的变化以及波包的角分布范围的变化对带隙结构的影响,得到了一维光子晶体对波包斜入射的带隙结构的基本特征,确定了计算波包带隙能够近似当作平面波处理的条件.研究表明,波包的带隙结构受入射角大小和波包角分布范围的影响.入射角越小,波包入射的带隙结构越接近平面波;波包的角分布范围越小,光子晶体对波包的带隙宽度和位置越接近平面波.     

Preparation, magnetic and electromagnetic properties of polyaniline/strontium ferrite/multiwalled carbon nanotubes composite

Strontium ferrite particles were firstly prepared by sol-gel method and self-propagating synthesis, and then the polyaniline/strontium ferrite/multiwalled carbon nanotubes composites were synthesized through in situ polymerization approach. Structure, morphology and properties of the composite were characterized by various instruments. XRD analysis shows that the output of PANI increases with the increase of the content of MWCNTs, due to the large surface area of MWCNTs. Because of the coating of PANI, the outer diameter of MWCNTs increases from 10 nm to 20-40 nm. The electrical conductivity of the composites increases with the amount increase of MWCNTs and reaches 7.2196 S/cm in the presence of 2 g MWCNTs. The coercive force of the composites prepared with 2 g MWCNTs is 7457.17 Oe, which is much bigger than that of SrFe₁₂O₁₉ particles 6145.6 Oe, however, both the saturation magnetization and the remanent magnetization of the composite become much smaller than those of SrFe₁₂O₁₉ particles. The electromagnetic properties of the composite are excellent in the frequency range of 2-18 GHz, which mainly depend on the dielectric loss in the range of 2-9 GHz, and mainly on the magnetic loss in the range of 9-18 GHz.     

Electromagnetic wave absorption of polymeric nanocomposites based on ferrite with a spinel and hexagonal crystal structure

We have investigated composites designed for microwave absorption based on magnetic filler, composed of phases within the SrO-Fe₂O₃ system, embedded in a polyphenylene sulfide matrix with a concentration ratio of 80:20 by weight. The formation of the nanosized particles of SrFe₁₂O₁₉ and Fe₃O₄, as the principal magnetic phases was achieved via the co-precipitation of Sr²⁺/Fe³⁺ ions using different molar ratios. The various precursors obtained were calcined between 600 °C and 900 °C in air. The electromagnetic parameters of the composites were measured with a vector network analyzer at 400 MHz to 32 GHz. The results show that with a composite composed of a complex magnetic filler comprising the nanoparticles of two magnetically diverse phases, i.e., a spinel phase as the electromagnetic wave absorber in the lower GHz range and a hexagonal phase operating at a higher GHz range, above 32 GHz, a microwave absorber with an broad absorption range can be prepared.     

“化学一步法”制备电磁功能化聚吡咯/γ-Fe2O3复合物纳米球及结构表征

在不添加掺杂剂的条件下, 以吡咯为单体, 三氯化铁为氧化剂, 采用"化学一步法"合成了电磁功能化的聚吡咯/γ-Fe2O3 复合物纳米结构. 研究了不同氯化亚铁用量对聚吡咯/γ-Fe2O3 复合物形貌、 电学性能以及磁学性能的影响. 结果表明, 氯化亚铁的用量对聚吡咯/γ-Fe2O3复合物的形貌影响不大, 都得到了聚吡咯/γ-Fe2O3复合物纳米球; 然而, 聚吡咯/γ-Fe2O3复合物纳米球的电学和磁学性能却明显受到氯化亚铁用量的影响. 聚吡咯/γ-Fe2O3复合物纳米球的电导率和最大饱和磁化强度随着氯化亚铁用量的增加而增大, 并在氯化亚铁用量增加到150 mg时达到最大值, 分别为72.1 S/cm和10.07 A·m2/kg, 实现了高电学性能和高磁学性能兼顾的电磁功能化导电聚合物纳米结构的制备.