A study of the electrocatalytic oxidation of aspirin on a nickel hydroxide-modified nickel electrode

The electrocatalytic oxidation of aspirin has been investigated on a nickel oxide-modified nickel electrode in alkaline solution. The process of oxidation and its kinetics have been investigated by using cyclic voltammetry, chronoamperometry, and electrochemical impedance spectroscopy techniques and also steady-state polarization measurements. Voltammetric studies have indicated that in the presence of aspirin, the anodic peak current of low-valence nickel species increases, followed by a decrease in the corresponding cathodic current. This indicates that aspirin was oxidized on the redox mediator immobilized on the electrode surface via an electrocatalytic mechanism. The rate constant of the catalytic oxidation of aspirin and the electron transfer coefficient have been found to be 1.15×10⁵ cm³ mol⁻¹s⁻¹ and 0.49, respectively. Impedance measurements show that aspirin is diffused into the bulk of the modifier film, and the oxidation process of aspirin occurs in the bulk of nickel oxide film. It has been shown that by using this modified electrode, aspirin can be determined with a detection limit of 4.8×10⁻⁵ and successfully applied for determination of aspirin in tablet.     

Multilayer films of cationic surfactants incorporating polyoxometalate on electrodes

A new kind of multilayer of didodecyldimethylammonium bromide (DDAB) and 1:12 phosphomolybdic anions (PMo₁₂) was achieved on the surface of a wax-impregnated graphite (WIG) electrode by ion exchange and electrostatic interaction. The characterization and electrochemical behavior of the multilayer films of DDAB/PMo₁₂ is described in detail. The chemically modified electrode was shown to exhibit an excellent electrocatalytic activity toward the reduction of BrO₃ ^– anion in 0.5 M H₂SO₄ and possesses several attractive features, such as simple preparation, fast response, good stability, etc. Electronic Publication     

硫酸介质中Ti／SnO2／PbO2析氧阳极的研究

由于硫酸溶液具有高的电导、一般条件下性质稳定、价格相对低廉等优点，所以电化学合成大多在硫酸溶液中进行．阳极析氧是电化学合成不可避免的阳极过程．但因硫酸的强腐蚀性，以及从阳极析出的氧的强氧化性，使得能满足工业生产的阳极材料很缺乏．自１９５０年荷兰Ｈｅｎ...     

Amperometric detection of nitrite and nitrate at tetraruthenated porphyrin-modified electrodes in a continuous-flow assembly

The modification of a glassy carbon surface by coating with an electrostatically assembled film of tetraruthenated cobalt porphyrin/(meso-tetra(4-sulphonatephenyl)porphyrinate zinc(II) yields an indicator electrode that allows the determination of nitrite to be performed with a limit of detection of 0.1 μM in a flow injection configuration. The dynamic range extends up to 1000 μM and the repeatability of the measurements was evaluated to be 1.5% with a throughput of 50 samples per hour. The efficiency of the bilayered film to mediate the electron transfer allows the determinations to be performed at a less positive potential (+0.75 V) with enhanced sensitivity. The coating also prevents the surface poisoning and its stability is maintained over several weeks. The same detector was used for determination of nitrate after reduction to nitrite in a reductor column containing copperised cadmium. This method was used for the determination of nitrate and nitrite in mineral water, saliva and cured meats, the results being in agreement with certified values and those obtained by using recommended procedures.     

直接甲醇燃料电池阳极催化剂研究进展

总结了近年来直接甲醇燃料电池阳极催化剂的研究工作，探讨了甲醇的电催化反应机理，阐述了设计催化剂的基本原则，同时对目前研究的各种催化体系作了比较和评价。对未来甲醇电催化剂的发展作出展望。     

The WCl6-e-Al-CH2Cl2 catalyzed polypentenamer formation via ring-opening metathesis polymerization (ROMP)

The synthesis of polypentenamer by an electrochemically generated metathesis polymerization catalyst from methylene chloride solution of WCl₆ was investigated. The active species formed by electroreduction of this salt under controlled potential of +900 mV at a platinum cathode with an aluminum anode were found to catalyze the ring-opening metathesis polymerization (ROMP) of cyclopentene, monocyclic olefin of relatively low strain, in high yield (89%) and at short period (32 min) under mild conditions. The effect of reaction parameters, e.g., olefin/catalyst ratio, reaction time, electrolysis time, catalyst aging, on the polymerization yield have been studied. The resulting polymer has been characterized by ¹H and ¹³C NMR, IR and gel permeation chromatography (GPC) techniques. Analysis of the polypentenamer microstructure by means of ¹³C NMR spectroscopy indicates that the polymer contains a mainly trans stereoconfiguration of the double bonds (σ_c = 0.31) and a slightly blocky distribution (r_tr_c > 1) of cis and trans double bond dyads (r_tr_c = 1.44). However, this electrochemical system is reluctant to facilitate the competing vinyl type addition polymerization reactions.     

Electrocatalysis of Metalloporphyrins(Ⅷ)——Electrocatalytic Reduction of Molecular Oxygen with Water-Soluble Cobalt (Ⅱ) Tetrakis(4-Trimethyl Ammonium Phenyl) Porphyrin Catalyst

Reported here is the electrocatalytic reduction of molecular oxygen in the presence of water-soluble cobalt(Ⅱ) tetrakis(4-trimethyl ammonium phenyl) porphyrin (Co(Ⅱ)TTAPP) as catalyst in solutions of various pH values. The overpotential of molecular oxygen reduction is reduced by ca. 200-400 mV in acidic and neutral solutions compared with several decades of millivolts in alkaline solutions, indicating that Co(Ⅱ)TTAPP possesses much higher catalytic activity in acidic and neutral solutions than in alkaline. H2TTAPP in solutions of various pH exhibits no significant catalytic activity for oxygen reduction. The significant difference in the electrocatalytic activity of Co(Ⅱ)TTAPP from that of H2TTAPP for oxygen reduction indicates that the electrocatalytic activity of Co(Ⅱ)TTAPP should be attributed to the central cobalt atom (Co(Ⅱ)) coordinated by N4 internal ring in Co(Ⅱ)TTAPP. The total number of electrons involved in oxygen reduction electrocatalyzed by Co (Ⅱ)TTAPP is 2, and the product of suc     

A method to construct polyelectrolyte multilayers film containing gold nanoparticles

Gold nanoparticles in polyelectrolyte multilayers film can be easily prepared by repeating immersion of a substrate in poly(diallyl dimethylammonium) chloride (PDDA)-AuCl₄⁻ complexes solution followed by reduction Au³⁺ through heating. UV-vis spectroscopy, cyclic voltammetry (CV) and tapping-mode atomic force microscopy (AFM) are used to confirm the successful construction of the polyelectrolyte multilayers film and the formation of gold nanoparticles. The multilayers film shows electrocatalytic activity to dioxygen reduction.     

Electrocatalysis of the SiC Particle‐Modified Glassy Carbon Electrode for the Oxidation of Adrenaline

The electrocatalytic properties of the SiC particle‐modified glassy carbon electrode (MGC) for adrenaline oxidation were studied by cyclic voltammetry (CV), double‐potential step chronocoulometry (DPSCC), and electrochemical impedance spectroscopy (EIS) techniques in McIlvaine buffer solution. It was shown that the electrode modified with SiC particles markedly displayed an electrocatalytic effect on the process of the electrochemical reaction of adrenaline, i.e., the activity and the reversibility of the MGC electrode has been significantly improved. This was attributed to the adsorption effect of the electroactive adrenaline molecules on the MGC electrode surface.     

Fabrication of a novel Li<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>MoO<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> film modified electrode and its application as an electrochemical sensor of iodate

A novel organic gel film modified electrode was simply and conveniently fabricated by casting Li_xMoO_y and polypropylene carbonate (PPC) onto the surface of a gold electrode. The cyclic voltammetry and amperometry studies demonstrated that the Li_xMoO_y film modified electrode has a high stability and a good electrocatalytic activity for the reduction of iodate. In amperometry, a good linear relationship between the steady current and the concentration of iodate was obtained in the range from 3×10^–7 to 1×10^–4 mol L^–1 with a correlation coefficient of 0.9997 and a detection limit of 1×10^–7 mol L^–1.