超支化双亲水性嵌段共聚物对CaCO3结晶影响的研究

采用合成的聚乙二醇-超支化聚酯(PEG-hb-DMPA)的线性-超支化杂化二嵌段共聚物, 探讨了羧端基树状功能化的杂化嵌段共聚物对CaCO₃结晶的影响，并用FTIR、XRD、SEM等对产物进行了表征。结果表明，羧端基的双亲水性嵌段共聚物对CaCO₃结晶形貌乃至晶型均具有显著调控作用，比较高的浓度(1.67 g·L^-1, >10 min)或较低浓度作用较长时间(0.33 g·L^-1, 24 h)均得到了呈较均匀球粒形态的球霰石CaCO₃结晶。     

一步法合成N-1,3-二羟基丙烷-2-基烷基乙酰胺

以5-氨基烷基-2,2-二甲基-1,3-二噁烷为起始原料, 乙酸酐为酰化剂, 一步法选择性地合成氨基二醇类氨基乙酰化产物N-1,3-二羟基丙烷-2-基烷基乙酰胺. 该方法操作简便, 收率高. 所合成的4个新化合物的结构均经FTIR, ¹H NMR, ¹³C NMR及HRMS确证. N-3-(1,3-二羟基丙烷-2-基)丙基乙酰胺(1a)作为关键的中间体, 可以用于HIV-1 Tat/ PCAF BRD抑制剂4的合成.     

本体聚合制备Sm(OPr~i)(TTA)_2/PMMA光致发光材料

合成了(异丙氧基)二(α-噻吩甲酰三氟丙酮基)钐[Sm(OPri)(TTA)2]配合物,并通过本体聚合制备Sm(OPri)(TTA)2/PMMA光致发光材料,采用IR1、H-NMR、XRD、DMTA、FS、ESEM对其进行表征.结果表明,Sm-(OPri)(TTA)2/PMMA在396 nm波长激发下在562、598、644 nm处发射很强的Sm3+离子4G5/2→6H5/2,4G5/2→6H7/2,4G5/2→6H9/2跃迁的特征荧光,其发光强度与Sm(TTA)3/PMMA相当;其储能模量E′、玻璃化温度Tg和粘流温度Tf均比PMMA有所提高;Sm(OPri)3/PMMA形成类似交联结构聚合物,而Sm(OPri)(TTA)2/PMMA为线型无定型结构聚合物.     

Low-temperature Heat Capacities and Thermodynamic Properties of Hydrated Sodium Cupric Arsenate [ NaCuAsO4·1.5H2O(s)]

Low-temperature heat capacities of the solid compound NaCuAsO4 · 1.5H2O(s) were measured using a precision automated adiabatic calorimeter over a temperature range of T = 78 K to T = 390 K. A dehydration process occurred in the temperature range of T = 368-374 K. The peak temperature of the dehydration was observed to be TD = (371.828±0.146) K by means of the heat-capacity measurement. The molar enthalpy and entropy of the dehyperimental values of heat capacities for the solid(Ⅰ) and the solid-liquid mixture(Ⅱ) were respectively fitted to two polynomial equations by the least square method. The smoothed values of the molar heat capacities and the fundamental thermodynamic functions of the sample relative to the standard reference temperature 298.15 K were tabulated at an interval of 5 K.     

三种化学方法合成K0.5Bi0.5TiO3粉体的机理比较

采用溶胶-凝胶法、水热法和溶胶-凝胶-水热法三种化学方法合成K_0.5Bi_0.5TiO₃ (KBT)无铅压电陶瓷粉体. 用X射线衍射(XRD)分析产物的结构, 用扫描电镜(SEM)和透射电镜(TEM)观察产物的形貌. 实验结果表明, 三种化学方法均可获得纯钙钛矿相KBT粉体, 但不同工艺获得的粉体在形貌和生成机制上有很大的不同. 溶胶-凝胶法属高温固相扩散机制, 需要700 ℃以上温度煅烧才可获得KBT纯相, 且粉体颗粒度大、团聚严重. 水热法符合溶解-结晶机制, 生长出四方形的KBT纳米片. 溶胶-凝胶-水热法利用了凝胶团聚体空间链状结构的模板作用, 通过原位结晶机制生长出KBT纳米线.     

Highly Efficient One-Pot Synthesis of 2-Arylmethyl N-Substituted Anilines via Yb（OTf）3 Catalyzed Three-Component Reaction

An efficient method has been developed for one-pot three-component coupling reactions of various aldehydes, 1-cyclohexen-2-one, and primary or secondary amines in the presence of a catalytic amount of Yb（OTf）3 under mild conditions to afford the corresponding 2-arylmethyl N-substituted anilines in good yields. In addition, the catalyst was easily recovered and could be reused for at least four cycles without any loss of activity.     

方酸染料在远红光区／近红外区对纳米晶二氧化钛电极的高效敏化作用

Four para-dialkylaminophenyl （PDAAP1-PDAAP4） bearing carboxyl groups were studied for application to the dye-sensitized solar cells （DSC）. It was found the short spacer CH2 between carboxyl and dialkylaminophenyl chromophore in PDAAP3 and PDAAP4 led to highly efficient monochromatic incident photon-to-current conversion efficiencies （IPCE）, however the long alkyl group C4H9 attached on aniline moieties in PDAAP2 and PDAAP4 favored improvement of open-circuit photovoltage. Thus, the solar cell sensitized by PDAAP4, having both short carboxyl groups CH2COOH and long alkyl groups C4H9, exhibited the IPCE maximum of 73% at 670 nm and overall energy conversion efficiency η of 3.06%, representing the highest IPCE and η values so far in dialkylaminophenyl-based organic dye-sensitized semiconductor solar cells. Taking advantage of the highly efficient sensitizing ability of PDAAP4 in far-red region, the data of IPCE above 630 nm of the solar cells were improved greatly by cosensitization with both N3 and PDAAP4. The influences of the TiO2 film thickness and the concentration of 4-tert-butylpyridine （TBP） in electrolyte were also investigated.     

3-氨基环己基甲酸和cis-3-氨基环己烯基-5-甲酸立体异构体的合成

通过手性胺拆分方法，从3-环己烯基甲酸出发分别合成得到了3-氨基环己基甲酸（ACHC）的四个立体异构体，以及cis-5-氨基-3-环己烯基甲酸（ACHEC）的二个立体异构体。     

水相锌二次电池正极材料V2O5/C的电化学性能研究

采用溶胶－凝胶法合成了一种V₂O₅/C复合材料.扫描电镜（SEM）和红外光谱（FTIR）分析表明,这是一种外层V₂O₅胶体包覆内层乙炔分子的多孔复合材料.以V₂O₅/C作正极,锌片为负极,Zn(ClO₄)₂溶液为电解质组成水相锌二次电池,采用循环伏安（CV）和电化学阻抗谱（EIS）等方法研究发现:V₂O₅:C质量比为1:1时电极具有最好的电化学性能,电池开路电压达1.64 V; Zn^2＋能分别在1.01 V和1.26 V处分步嵌入V₂O₅/C结构中A、B两种位置,其嵌入电流密度峰值最高可达70 mA•g^－1,并且具有较好的循环充放电性能;在一定放电深度下,V₂O₅/C电极反应速率受Zn^2＋的扩散过程控制.     

Yb2O3对TiO2/(O''+β'')-Sialon复相陶瓷中TiO2相变的影响

以纳米锐钛矿型TiO2粉和（O＇＋β＇）-Sialon粉为原料制备出了TiO2／（O＇＋β＇）-Sialon复相陶瓷，研究了Yb2O3添加剂对材料中锐钛矿型TiO2相变的影响，对其影响机制进行了探讨。采用XRD对材料进行物相组成和晶格参数表征。结果表明，Yb2O3对锐钛矿相变开始温度无明显影响，但对相变有显著的促进作用，随添加量的增加，其作用逐渐减弱。添加的Yb2O3同时以两种形式存在：一部分进入TiO2晶格，一部分堆积在TiO2晶粒表面。Yb^n＋进入TiO2晶格置换Ti^4＋和Yb^3＋与TiO2发生氧化还原反应促进相变，而存在于TiO2表面的Yb^3＋与TiO2相互作用形成Ti-O-Yb键而抑制相变。Yb2O3对锐钛矿相变的影响是这两方面机制共同作用的结果。