Electrocatalytic Determination of Vitamin C Using Calixarene Modified Carbon Paste Electrodes

Effect of in situ complexation of some ions with variable valencies, like Co(II), Ni(II), Mn(II), Cu(II) and Pb(II) on the the electrooxidation of Vitamin C (L ‐ascorbic acid) was studied by cyclic voltammetry using carbon paste electrodes modified with p‐tert‐butylcalix[4]arene and p‐tert‐butylcalix[6]arene in perchloric acid, acetic acid and ammonium acetate media. Pb(II) was found to bind strongly with p‐tert‐butylcalix[4]arene in acetate medium, resulting in its being retained at the electrode surface and catalyzing the oxidation of ascorbic acid. The overpotential was reduced by about 200 mV with an increase in the peak currents. Linearity was observed over the range of 0.07–400 ppm with a detection limit of 30 ppb by differential pulse voltammetry. Interferences of some common substances like sugars and amino acids were studied and the modified electrode was used for the determination of vitamin C in commercial samples.     

Spectroelectrochemical and Voltammetric Studies of L‐DOPA

The electrooxidation of L -dopa at GC electrode was studied by in situ UV-vis spectroelectrochemistry (SEC) and cyclic voltammetry. The mechanism of electrooxidation and some reaction parameters were obtained. The results showed that the whole electrooxidation reaction of L -dopa at glassy carbon (GC) electrode was an irreversible electrochemical process followed by a chemical reaction in neutral solution (EC mechanism). The spectroelectrochemical data were treated by the double logarithm method together with nonlinear regression, from which the formal potential E⁰=228 mV, the apparent electron-transfer number of the electrooxidation reaction αn=0.376 (R=0.99, SD=0.26), the standard electrochemical rate constant k⁰=(3.93±0.12)×10⁻4 cm s⁻¹ (SD=1.02×10⁻²), and the formation equilibrium constant of the following chemical reaction k_c=(5.38±0.34)×10⁻¹ s⁻¹ (SD=1.02×10⁻²) were also obtained.     

Synthesis and characterization of LiCo<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Mn<Subscript>2−<Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>4</Subscript> powder by a novel CAM microwave-assisted sol–gel method for Li ion battery

LiMn₂O₄-based spinels are of great interest as positive electrode materials for lithium ion batteries. LiCo _x Mn_2−x O₄ (x = 0.0, 0.1, 0.2, 0.3, and 0.4) spinel phases have been synthesized by novel citric acid-modified microwave-assisted sol–gel method. The structural properties of the synthesized products have been investigated by X-ray powder diffraction and scanning electron microscopy. To improve the recharge capacity of Li/LiCo _x Mn_2−x O₄ cells, the electrochemical features of LiCo _x Mn_2−x O₄ compounds have been evaluated as positive electrode materials. The structural properties of Co-doped oxides are very similar to LiMn₂O₄ electrode. Techniques like cyclic voltammetry, charge–discharge and cycle life are also used to characterize the LiCo _x Mn_2−x O₄ (x = 0.0, 0.1, 0.2, 0.3, and 0.4) electrodes.     

Detection of TMV with ODA-H(2)O(2)-HRP voltammetric enzyme-linked immunoassay system

o-Dianisidine (ODA)-H₂O₂-horseradish peroxidase (HRP) voltammetric enzyme-linked immunoassay system has firstly been used for the detection of tobacco mosaic virus (TMV). HRP catalyzes strongly the oxidation reaction of ODA by H₂O₂, the product of which produces a sensitive second order derivative linear sweep voltammetric peak at potential of −0.56 V (versus SCE) in Britton–Robinson (BR) buffer. HRP activity has been measured with this voltammetric peak and TMV detected through immunoreaction. The detection limit for HRP is 9.25×10^-7 mU l⁻¹ and the linear range is 2.5×10⁻⁶–5.0×10⁻⁴ mU l⁻¹. The detection limit for the clarified TMV is 0.25 ng ml⁻¹ and the highest dilution ratio detected for the infected leaf sap is 1:8×10⁵. The sensitivity for TMV detection with this method is higher than that with the enzyme-linked immunosorbent spectrophotometric assay (ELISA) using ODA-H₂O₂-HRP system. The processes of the enzyme-catalyzed reaction and the electro-reduction of the product of the enzyme-catalyzed reaction have been described.     

取代基物化参数及其在药物定量构效关系中的应用

把取代基电性、立体及疏水性物化参数组合建立一种新取代基描述方法, 对环尿素类和N,N-二甲基-2-溴苯乙胺类衍生物进行结构表征. 对训练样本集通过逐步回归筛选变量, 所建多元线性回归方程R2分别为0.853和0.960, 留一法交互检验Rcv2分别为0.723和0.901；用预测集样本作外部预测, 所得Qext2分别为0.7617和0.7653. 结果显示：环尿素类化合物结构中苯环邻位立体、间位疏水、对位疏水及立体因素对该类药物抗HIV活性产生阻抑作用； N,N-二甲基-2-溴苯乙胺类苯环上取代基立体因素及对位给电子效应有利于提高肾上腺素能阻断活性.     

邻氨基酚在硫堇分子自组装膜修饰金电极上的电化学行为及其测定

在 0 .0 5 mol/L p H4.2的 HAc- Na Ac- PHP(邻苯二甲酸氢钾 )缓冲溶液中 ,用硫堇分子自组装膜修饰金电极对邻氨基酚的电化学行为进行了初步研究。研究发现 ,邻氨基酚在 - 0 .1 V左右出现一可逆氧化还原峰 ,在 0 .38V( vs.SCE)左右产生一阳极峰。两峰均由邻氨基酚的氧化还原引起 ,较正处的阳极峰表现出吸附波的性质 ,该峰较灵敏 ,适于伏安测定。该峰的峰电流与邻氨基酚的浓度在 1 .0× 1 0 - 6 ～ 5 .0× 1 0 - 4mol/L范围内呈线性关系 (相关系数 r =0 .9991 )。该方法可用于邻氨基酚含量的测定     

Voltammetry of Dissolved Iron(III)–Nitrilotriacetate–Hydroxide System in Water Solution

The investigation of the dissolved iron(III)–nitrilotriacetate–hydroxide system in the water solution (I=0.1 mol L^?1 in NaClO₄; pH 8.0±0.1) using differential pulse cathodic voltammetry, cyclic voltammetry, and sampled direct current (DC) polarography, was carried out on a static mercury drop electrode (SMDE). The dissolved iron(III) ion concentrations varied from 2.68×10^?6 to 6×10^?4 mol L^?1 and nitrilotriacetate concentrations were 1×10^?4 and 5×10^?4 mol L^?1. By deconvoluting of the overlapped reduction voltammetric peaks using Fourier transformation, four relatively stable, dissolved iron(III) complex species were characterized, as follows: [Fe(NTA)₂]^3?, mixed ligand complexes [FeOHNTA]^? and [Fe(OH)₂NTA]^2?, showing a one‐electron quasireversible reduction, and binuclear diiron(III) complex [NTAFeOFeNTA]^2?, detected above 4×10^?4 mol L^?1 of the added iron(III) ions, showing a one‐electron irreversible reduction character. The calculations with the constants from the literature were done and compared with the potential shifts of the voltammetric peaks. Fitting was obtained by changing the following literature constants: log β₂([Fe(NTA)₂]^3?) from 24 to 27.2, log β₁([FeNTA]^?) from 8.9 to 9.2, log β₂([Fe(NTA)₂]^4?) from 11.89 to 15.7 and log β₂([Fe(OH)₂NTA]^3?) from 15.63 to 19. The determination of the electrochemical parameters of the mixed ligand complex [FeOHNTA]^?, such as: transfer coefficient (α), rate constant (k_s) and formal potential (E°') was done using a sampled DC polarography, and found to be 0.46±0.05, 1.0±0.3×10^?3 cm s^?1, and ?0.154±0.010 V, respectively. Although known previously in the literature, these four species have now for the first time been recorded simultaneously, i.e. proved to exist simultaneously under the given conditions.     

Investigation of the Electrochemical Reduction of Benzophenone in Aprotic Solvents Using the Method of Cyclic Voltammetry

The reduction of benzophenone (Bzph) in 3-pentanone (PEN), acetone (ACE), N,N-dimethylacetamide (DMA), N,N-dimethylformamide (DMF), tetrahydrofuran (THF), acetonitrile (ACN) and dimethyl sulfoxide (DMSO) with n-tetrabutylammonium hexafluorophosphate (TBAPF₆) as background electrolyte was studied using the technique of cyclic voltammetry at the temperature of 263.15 K. The half-wave potentials (E _1/2) were extracted. The reduction of Bzph occurs in two successive one-electron steps to produce first the free radical anion Bzph⁻ and then the dianion Bzph²⁻. The results indicated that the radical anion Bzph⁻ is reoxidized to Bzph in all investigated solvent media whereas the dianion Bzph²⁻ is reoxidized to Bzph⁻ only in THF. The heterogeneous electron-transfer rate constants (k _s ) were evaluated by employing the electrochemical rate equation proposed by Nicholson. The rate of electron transfer for the Bzph/Bzph⁻ couple was found to be relatively slow in all investigated solvent media. Consequently, the electron-transfer processes can be recognized as quasi-reversible. The diffusion coefficients (D) of Bzph in the investigated solvent media have been calculated using the modified Randles-Sevcik equation. The effect of the physical and chemical properties of the solvent medium on the electrochemical behavior of Bzph has been examined.     

Sensitive Voltammetric Response of p‐Nitroaniline on Single‐Wall Carbon Nanotube‐Ionic Liquid Gel Modified Glassy Carbon Electrodes

An ionic liquid (i.e., 1‐butyl‐3‐methylimidazolium hexafluorophosphate, BMIMPF₆)‐single‐walled carbon nanotube (SWNT) gel modified glassy carbon electrode (BMIMPF₆‐SWNT/GCE) is fabricated. At it the voltammetric behavior and determination of p‐nitroaniline (PNA) is explored. PNA can exhibit a sensitive cathodic peak at ?0.70 V (vs. SCE) in pH 7.0 phosphate buffer solution on the electrode, resulting from the irreversible reduction of PNA. Under the optimized conditions, the peak current is linear to PNA concentration over the range of 1.0×10^?8–7.0×10^?6 M, and the detection limit is 8.0×10^?9 M. The electrode can be regenerated by successive potential scan in a blank solution for about 5 times and exhibits good reproducibility. Meanwhile, the feasibility to determine other nitroaromatic compounds (NACs) with the modified electrode is also tested. It is found that the NACs studied (i.e., p‐nitroaniline, p‐nitrophenol, o‐nitrophenol, m‐nitrophenol, p‐nitrobenzoic acid, and nitrobenzene) can all cause sensitive cathodic peaks under the conditions, but their peak potentials and peak currents are different to some extent. Their peak currents and concentrations show linear relationships in concentration ranges with about 3 orders of magnitude. The detection limits are 8.0×10^?9 M for p‐nitroaniline, 2.0×10^?9 M for p‐nitrophenol, 5.0×10^?9 M for o‐nitrophenol, 5.0×10^?9 M for m‐nitrophenol, 2.0×10^?8 M for p‐nitrobenzoic acid and 8.0×10^?9 M for nitrobenzene respectively. The BMIMPF₆‐SWNT/GCE is applied to the determination of NACs in lake water.     

掺硼多晶金刚石膜的电化学性能研究

采用EACVD(Electron Assisted Chemical Vapor Deposition)方法制备了掺硼金刚石膜, 并用扫描电镜、拉曼光谱及霍尔效应等测试方法对其表面形貌、生长特性、载流子浓度以及导电性能进行了分析. 测试结果表明, 掺硼金刚石膜是由微米级晶粒组成的多晶膜, 其载流子浓度为4.88×1020 cm-3, 电阻率为0.03 Ω·cm, 是高品质金刚石膜. 用该金刚石膜制作电化学电极, 利用循环伏安法分别测量了金刚石膜电极在氯化钾空白底液、亚铁氰化钾溶液和左旋半胱氨酸溶液中的循环伏安曲线, 发现该金刚石膜电极在水溶液中具有宽的电化学窗口(约为3.7 V)和接近零的背景电流, 在生物制剂的检测中具有很高的灵敏度和良好的稳定性, 是一种理想的电化学电极材料.