探究Cu/ZnO相互作用对CO2加氢制甲醇反应性能的影响

Using renewable green hydrogen and carbon dioxide (CO₂) to produce methanol is one of the fundamental ways to reduce CO₂ emissions in the future, and research and development related to catalysts for efficient and stable methanol synthesis is one of the key factors in determining the entire synthesis process. Metal nanoparticles stabilized on a support are frequently employed to catalyze the methanol synthesis reaction. Metal-support interactions (MSIs) in these supported catalysts can play a significant role in catalysis. Tuning the MSI is an effective strategy to modulate the activity, selectivity, and stability of heterogeneous catalysts. Numerous studies have been conducted on this topic; however, a systematic understanding of the role of various strengths of MSI is lacking. Herein, three Cu/ZnO-SiO₂ catalysts with different strengths of MSI, namely, normal precipitation Cu/ZnO-SiO₂ (Nor-CZS), co-precipitation Cu/ZnO-SiO₂ (Co-CZS), and reverse precipitation Cu/ZnO-SiO₂ (Re-CZS), were successfully prepared to determine the role of such interactions in the hydrogenation of CO₂ to methanol. The results of temperature-programmed reduction (H₂-TPR) and X-ray photoelectron spectroscopy (XPS) characterization illustrated that the MSI of the catalysts was considerably affected by the precipitation sequence. Fourier transform infrared reflection spectroscopy (FT-IR) results indicated that the Cu species existed as CuO in all cases and that copper phyllosilicate was absent (except for strong Cu-SiO₂ interaction). Transmission electron microscopy (TEM), X-ray diffraction (XRD), and N₂O chemical titration results revealed that strong interactions between the Cu and Zn species would promote the dispersion of Cu species, thereby leading to a higher CO₂ conversion rate and improved catalytic stability. As expected, the Re-CZS catalyst exhibited the highest activity with 12.4% CO₂ conversion, followed by the Co-CZS catalyst (12.1%), and the Nor-CZS catalyst (9.8%). After the same reaction time, the normalized CO₂ conversion of the three catalysts decreased in the following order: Re-CZS (75%) > Co-CZS (70%) > Nor-CZS (65%). Notably, the methanol selectivity of the Re-CZS catalyst was found to level off after a prolonged period, in contrast to that of Co-CZS and Nor-CZS. Investigation of the structural evolution of the catalyst with time on stream revealed that the high methanol selectivity of the catalyst was caused by the reconstruction of the catalyst, which was induced by the strong MSI between the Cu and Zn species, and the migration of ZnO onto Cu species, which caused an enlargement of the Cu/ZnO interface. This work offers an alternative strategy for the rational and optimized design of efficient catalysts.     

Conductances of some electrolytes in 2-methylpyridine-N-oxide at 55°C

Conductance measurements for fifteen uni-univalent salts in 2-methylpyridine-N-oxide (2-MPO) were made over the concentration range of 2–120×10^–4 mol-dm^–3 at 55°C. All conductance data were evaluated by the Lee-Wheaton equation. The results indicate that all of the salts studied are slightly associated in 2-MPO, which is, nevertheless, a reasonably good ionizing solvent compared to other solvents having a similar value for the dielectric constant. The tetraalkylammonium halides are weaker electrolytes than the tetraphenylborate salts in 2-MPO. Ionic limiting molar conductances were obtained by using as a reference electrolyte tris(iso-pentyl)butylammonium tetraphenylborate. Anions appear to be poorly solvated in this solvent but certain cations, particularly Na⁺ and K⁺, show evidence of specific ion-solvent interaction.This study was presented, in part, at the 6th Central Regional Meeting of the American Chemical Society, Detroit, Michigan, April 1974.     

活泼配盐［(μ-RE)(μ-E′)Fe2(CO)6］［Et3NH］［E,E′=S,Se］的亲电反应研究——蝶状Fe2SSe及Fe2Se2簇合物的合成及表征

本文由［(μ-t-BuS)(μ-CO)Fe₂(CO)₆］［Et₃NH］和硒粉形成的［(μ-t-BuS)(μ-Se)Fe₂(CO)₆］［Et₃NH］，分别与溴化苄，二碘甲烷及邻一、间一、对一双(溴甲基)苯反应，合成了蝶状Fe₂SSe单簇物(μ-t-BuS)(μ-PhCH相似文献   

2,4—二氨基—5—取代苄基嘧啶类质谱研究

报道了8个2,4-二氨基-5-取代苄基嘧啶衍生物的电子轰击质谱及碰撞活化解离和质量分析离子动能谱.该谱提供了化合物醚键及2,4-二氨基-5-取代苄基嘧啶环的主要碎裂途径,总结了一些裂解规律,将有助于这类化合物的结构推断。     

一步法合成N-1,3-二羟基丙烷-2-基烷基乙酰胺

以5-氨基烷基-2,2-二甲基-1,3-二噁烷为起始原料, 乙酸酐为酰化剂, 一步法选择性地合成氨基二醇类氨基乙酰化产物N-1,3-二羟基丙烷-2-基烷基乙酰胺. 该方法操作简便, 收率高. 所合成的4个新化合物的结构均经FTIR, ¹H NMR, ¹³C NMR及HRMS确证. N-3-(1,3-二羟基丙烷-2-基)丙基乙酰胺(1a)作为关键的中间体, 可以用于HIV-1 Tat/ PCAF BRD抑制剂4的合成.     

本体聚合制备Sm(OPr~i)(TTA)_2/PMMA光致发光材料

合成了(异丙氧基)二(α-噻吩甲酰三氟丙酮基)钐[Sm(OPri)(TTA)2]配合物,并通过本体聚合制备Sm(OPri)(TTA)2/PMMA光致发光材料,采用IR1、H-NMR、XRD、DMTA、FS、ESEM对其进行表征.结果表明,Sm-(OPri)(TTA)2/PMMA在396 nm波长激发下在562、598、644 nm处发射很强的Sm3+离子4G5/2→6H5/2,4G5/2→6H7/2,4G5/2→6H9/2跃迁的特征荧光,其发光强度与Sm(TTA)3/PMMA相当;其储能模量E′、玻璃化温度Tg和粘流温度Tf均比PMMA有所提高;Sm(OPri)3/PMMA形成类似交联结构聚合物,而Sm(OPri)(TTA)2/PMMA为线型无定型结构聚合物.     

H2O2络合凝胶法制备纳米TiO2/SiO2复合催化剂及其光催化性能

采用H2O2络合凝胶法获得钛的络合物[TiO(H2O2)]2 水溶胶,并与SiO2水溶胶包覆复合,制备了纳米TiO2/SiO2复合半导体催化剂,其结构经XRD和BET表征。以含阳离子艳红染料模拟废水降解为模型反应,考察了复合催化剂的光催化性能。实验结果表明:经650℃焙烧后的复合催化剂中TiO2粒径为9.8 nm,光催化活性最好,SiO2的最佳掺杂量为25%。     

Residence times in kink sites and Markov chain model of alloy and intermetallic compound deposition

The concept of the residence time τ_ksp of an atom in a kink site has recently been suggested to understand the processes in electrochemical deposition of alloys and intermetallic compounds. Different kink sites with different residence times must be defined for alloys and intermetallic compounds. Based on this model, the finite Markov chain theory is applied to describe the selectivity of the growth process. An analytical relationship between the alloy composition and the metal ion concentrations in the electrolyte is derived. General model parameters are ratios g _i = K _ii/K _ij of equilibrium constants of the reaction of electrolyte ions with different kink sites on the surface (i, j representing different alloy components). These ratios are called selectivity constants. For simple conditions, the equation g _i ≈ τ_ii/τ_ij connects the g _i values with the residence times. The theory is tested in the deposition of alloys Co-Ni (anomalous co-deposition) and Ni-Mo (induced co-deposition). Additionally, Bi₂Te₃, an example of stoichiometric semiconductor deposition, is treated. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 10, pp. 1216–1223. The text was submitted by the authors in English.     

Phosphine-catalyzed enantioselective [3+2] annulations of 2,3-butadienoates with imines

The first systematic screening of chiral phosphines in the cycloaddition reaction between 2,3-butadienoates and arylimines has led to the identification of fairly efficient catalysts. 2-Aryl-3-pyrrolines have been obtained with enantiomeric excesses up to 64%. In one instance, the enantiomeric excess could be increased to 91% ee by combining the enantioselective cyclization reaction with a crystallization step.