水母雪莲不同器官中铅和镉的含量分析

应用石墨炉原子吸收光谱法分析了水母雪莲不同器官中铅、镉的含量。结果表明水母雪莲各器官铅含量由多到少的顺序是叶〉根〉苞片〉茎〉花萼〉花〉种子,各器官镉含量由多到少顺序是花〉苞片〉根〉茎〉叶〉花萼〉种子。本实验方法简便快速,结果准确可靠。     

Syntheses,structures, and luminescence of three anion-dependent cadmium coordination polymers

Self-assembly of the flexible ligand 1,3,5-tri(1,2,4-triazol-1-ylmethyl)-2,4,6-trimethylbenzene (ttmb) with Cd(II) salts gave three coordination polymers {[Cd(ttmb)₂](SO₄)(H₂O)₁₆} _n (1), {[Cd(ttmb)₂(H₂O)₂](NO₃)₂(H₂O)₆} _n (2), and {[Cd(ttmb)₂(H₂O)₂](ClO₄)₂(H₂O)₇} _n (3). Complex 1 has a (3,6)-connected CdCl₂-type 2-D network. However, 2 and 3 show the 2-D (4,4) network and 1-D double chain, respectively. Complexes 1, 2, and 3 exhibit luminescent emission maxima at 306, 339, and 298?nm, respectively, in the solid state at room temperature.     

Cadmium determination in biological samples by direct solid sampling flame atomic absorption spectrometry

A direct solid sampling flame atomic absorption spectrometric procedure for trace determination of cadmium in biological samples has been developed. Test samples (0.05–2.00 mg) were ground and weighed into small polyethylene vials, which were connected to the device for solid sample introduction into a conventional air/acetylene flame. Test samples were carried as a dry aerosol to a quartz cell, placed between the burner and the optical path, which had a perpendicular entrance and a slit in the upper part. The atomic vapor generated in the flame produced a transient signal that was totally integrated within 1 s. The effect of operating conditions and the extent of grinding on the analytical signal were evaluated. Background signals were always low and a characteristic mass of 0.29 ng Cd was obtained. Calibration was performed using different masses of solid certified reference materials. Results obtained for certified and in-house reference materials were typically within the 95% confidence interval of the certified and/or reference value, and the precision, expressed as relative standard deviation, was between 3.8 and 6.7%. The proposed system is simple and it might be adapted to conventional atomic absorption spectrometers allowing the determination of Cd in more than 80 test samples per hour, excluding weighing.     

Quantitative Studies of Metal Ion Adsorption on a Chemically Modified Carbon Surface: Adsorption of Cd(II) and Hg(II) on Glutathione Modified Carbon

The adsorption behavior of model toxic metal cations namely Cd(II) and Hg(II) on carbon surfaces chemically modified by glutathione was investigated as a function of the concentration of Cd²⁺ and Hg²⁺ ions, time and the amount of modified carbon used. Square wave and linear sweep anodic stripping voltammetry was used to monitor the uptake of Cd(II) and Hg(II) ions respectively. Kinetic and adsorption isotherm studies reveal that both Cd(II) and Hg(II) ions undergo similar large adsorption with the modified glutathione carbon material (Glu‐carbon).     

Solution Equilibria. A Unified Mathematical Treatment of Experimental Polarographic and Potentiometric Data from Acid?Base and Ligand Titrations. A Polarographic and Ion Selective Electrode Study of CdII?(N‐(2‐hydroxyethyl)iminodiacetic acid)?OH System

It has been demonstrated that potentiometric and polarographic data coming from either acid? base or ligand titrations can be evaluated by the same set of equations and mathematical procedures involving mass‐balance equations written for any metal? ligand model, including polynuclear species. It is shown that the concept of the complex formation curves, used previously in modeling and refinement of stability constants in acid‐base titration, is of general nature and can be successfully used in polarographic and potentiometric experiments conducted as a function of pH or an excess of a ligand. It appears that the linear relationship ΔE vs. log [M], typical for potentiometric studies with ISE, holds also in the case of the study of kinetically mixed metal‐ligand system studied by polarography when the corrected shift in the polarographic signal is used. The relationship ΔE vs. log [M] applies equally to the acid‐base and ligand titration for both experimental techniques employed (potentiometry and polarography). The significance of the corrected shift is discussed and its meaning in the study of kinetically fast or slow metal? ligand systems is elaborated. Advantages of the acid‐base titration over the ligand titration are discussed. The generalized mathematical data treatment was successfully employed in the study of the Cd^II? (N‐(2‐hydroxyethyl)iminodiacetic acid) system. Results obtained from both analytical techniques (potentiometry with the use of an ion selective electrode, and two polarographic techniques) and analytical procedures (acid? base and ligand titrations) compare well with each other and with the literature data (the formation and stability constants of ML and ML₂). In addition, a new complex M(HL) was identified and its stability constant is reported.     

β修正光度法测定镉络合物特征参数

利用β修正分析理论建立金属络合体系中络合物组成及其摩尔吸光系数数学方程，研究了镉（Ⅱ）－丁基罗丹明Ｂ（ＢＲｈＢ）－碘（Ⅰ－）缔合反应体系，结果表明，镉与ＢＲｈＢ组成比为１：２，缔合产物在６１０ｎｍ波长处摩尔吸光系数比其表观值高△ε６１０＝０．９１×１０４Ｌ．ｍｏｌ－１．ｃｍ－１。     

Preparation of mesoporous cadmium sulfide nanoparticles with moderate pore size

The preparation of cadmium sulfide nanoparticles that have a moderate pore size is reported. This preparation method involves a hydrothermal process that produces a precursor mixture and a following acid treatment of the precursor to get the porous material. The majority of the particles have a pore size close to 20 nm, which complements and fills in the gap between the existing cadmium sulfide materials, which usually have a pore size either less than 10 nm or are well above 100 nm.     

Two CdII/CoII‐Imidazolate Coordination Polymers: Syntheses,Crystal Structures,Stabilities, and Luminescent/Magnetic Properties

Cadmium(II) based 2D coordination polymer [Cd(L1)₂(DMF)₂] ( 1 ) (L1 = 4,5‐dicyano‐2‐methylimidazolate, DMF = N,N′‐dimethylformamide) and 2D cobalt(II)‐imidazolate framework [Co(L3)₄] ( 2 ) (L3 = 4,5‐diamide‐2‐ethoxyimidazolate) were synthesized under solvothermal reaction conditions. The materials were characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis, powder X‐ray diffraction measurement (PXRD) and single‐crystal X‐ray diffraction. Compound 1 has hexacoordinate Cd^II ions and forms a zigzag chain‐like coordination polymer structure, whereas compound 2 exhibits a 2D square grid type structure. The thermal stability analysis reveals that 2 showed an exceptional thermal stability up to 360 °C. Also, 2 maintained its fully crystalline integrity in boiling water as confirmed by PXRD. The solid state luminescent property of 1 was not observed at room temperature. Compound 2 showed an independent high spin central Co^II atom.     

Structures and Fluorescent Properties of Cadmium(II) Complexes with 1D and 2D Structures Based on Tridentate Benzimidazole Ligands

The cadmium(II) complexes [CdL1(m‐nba)₂] ( 1 ), [CdL1(p‐nba)₂] · C₂H₅OH ( 2 ), [CdL2(p‐nba)₂] · CH₃OH ( 3 ), and [CdL2(p‐nbat)₂] ( 4 ) containing the ligands L1 and L2 [L1 = 2,6‐bis(benzimidazol‐2‐yl)pyridine, L2 = bis(2‐benzimidazolylmethyl)amine] were synthesized and characterized (m‐nba, p‐nba, and p‐nbat are the anions of p‐nitrobenzoic acid, m‐nitrobenzoic acid, and p‐nitrobenzeneacetic acid, respectively). The complexes were investigated by X‐ray single crystal diffraction, elemental analysis as well as IR and fluorescence spectroscopy. Compounds 1 – 3 contain a distorted pentagonal bipyramidal coordination sphere with Cd^II coordinated by two carboxylate ligands in bidentate‐chelating mode, whereas complex 4 exhibits a distorted octahedral arrangement with one carboxylate ligand in bidentate‐chelating and the other in monodentate coordination mode. 1 and 2 form a 1D chain interplayed by hydrogen bonding and strong π–π stacking interactions. 3 and 4 vary from 1D chain into 2D single‐layer and double‐layer networks because of more extensive hydrogen bonding interactions. The complexes show emission maxima in the blue region in the solid state and emission bands are red‐shifted compared to those of the free ligands.