用于成像侦察的CCD探测器成像分辨力的探讨

通过对CCD探测器成像过程的模拟,分析了CCD成像在像元几何尺寸及成像灰度方面的数字离散化特征对CCD成像分辨力的影响,给出了CCD成像分辨力与CCD像元分辨力的关系,同时也给出了在相应情况下的调制度传递函数(MTF)的数值。     

用于同步辐射光源的成像板粉末衍射系统

报道了我们研制的一套成像板粉末衍射装置,对其误差来源进行了详细的分析讨论,并与衍射仪进行了比较.该装置的半径为143.3mm,最大测量角度范围不160°，最大角度(2q )偏差小于0.03°,这些性能指标已被实验所证实,完全可应用于粉末衍射全谱的测量.     

Time resolved spectroscopic NMR imaging using hyperpolarized Xe

We have visualized the melting and dissolution processes of xenon (Xe) ice into different solvents using the methods of nuclear magnetic resonance (NMR) spectroscopy, imaging, and time resolved spectroscopic imaging by means of hyperpolarized ¹²⁹Xe. Starting from the initial condition of a hyperpolarized solid Xe layer frozen on top of an ethanol (ethanol/water) ice block we measured the Xe phase transitions as a function of time and temperature. In the pure ethanol sample, pieces of Xe ice first fall through the viscous ethanol to the bottom of the sample tube and then form a thin layer of liquid Xe/ethanol. The xenon atoms are trapped in this liquid layer up to room temperature and keep their magnetization over a time period of 11 min. In the ethanol/water mixture (80 vol%/20%), most of the polarized Xe liquid first stays on top of the ethanol/water ice block and then starts to penetrate into the pores and cracks of the ethanol/water ice block. In the final stage, nearly all the Xe polarization is in the gas phase above the liquid and trapped inside the pores. NMR spectra of homogeneous samples of pure ethanol containing thermally polarized Xe and the spectroscopic images of the melting process show that very high concentrations of hyperpolarized Xe (about half of the density of liquid Xe) can be stored or delivered in pure ethanol.     

Radiation heat transfer in axisymmetric quartz glass tubes

A mathematical model is proposed to describe the heat transfer in quartz glass axisymmetric tubes. Heat is transferred inside the glass by radiation and conduction. Scattering of thermal radiation inside the glass is ignored. At the boundaries of the tube the radiative intensity is specularly reflected. The spectral dependent radiative intensity and the temperature distribution inside the tube are determined. The model is applied to simulate the cooling process of a quartz glass tube. The calculated temperature is in agreement with that obtained from an experiment. Furthermore, steady-state temperature distributions in quartz glass tubes of different lengths have been determined.     

Geodesic Acoustic Mode in Toroidally Axisymmetric Plasmas with Non-Circular Cross Sections

The geodesic acoustic mode （GAM）, first predicted by Winsor, Johnson and Dawson in an attempt to explain some experimentally observed low frequency oscillations in stellarators, is a special electrostatic fluid mode with low mode number and coupled with the so-called geodesic curvature of a toroidally confined plasma. The recent on this mode are due to the close relevance of the stabi- lization of drift turbulence by both the zonal flow and the GAM. Previously, the GAM was illustrated in very simple geometries,     

激光水下偏振特性用于目标图像探测

利用激光水下偏振特性获得偏振差分图像(PDI),并运用PDI技术,从理论和实验上对水下目标探测进行了研究.介绍了PDI基本概念和实验系统原理,然后比较分析了不同条件下普通图像与PDI在辨别目标距离及其纹理上的差别和PDI中背景偏振光的影响,得出利用目标和背景偏振光的差异区分二者,从而提高探测距离的结论,并取得了较好的效果.在此基础上提出了通过处理有关PDI偏振参量来进一步辨别目标与背景的设想.     

Static and dynamic detection of axial surface defects on metallic wires by conical triple laser reflection

The quality of the surface of metallic wires is relevant for different applications. The reflection of a laser beam on the surface of a metallic cylindrical wire provides an efficient way to inspect the quality of its surface. Our interest is focused in the detection of axially oriented defects, which are the most relevant for the wire drawing process. We present a simple interference-geometrical model to describe the light pattern reflected from a wire with defects. This model adequately accounts for the observed results from an industrial prototype developed for the purpose. It incorporates three-laser beams incident on the wire at equidistant locations in its perimeter, which produce three reflection cones with a CCD. This configuration permits to explore the whole perimeter of the wire. Several results are presented, both in static operation and in production line, in agreement with qualitative and quantitative predictions.     

准一维电子通道中声电电流的理论计算

表面声波在GaAs/Al _x Ga_1-x As异质结表面上沿由分裂门产生的准一维电子通道方向传 播时，在通道中诱导产生声电电流.采用WKB近似，计算了只有一个电子被量子阱俘获时的声电电流；并在此基础上，详细讨论了表面声波的频率和功率，以及门电压和源漏偏压对声电电流的影响. 关键词： 表面声波 准一维电子通道 量子阱 声电电流     

第二讲合成孔径声纳成像及其研究进展

文章在介绍了图像声纳的特点、合成孔径声纳（synthetic aperture sonar,SAS）产生背景和发展过程的基础上,对合成孔径声纳的原理、技术难点、成像算法等问题进行了讨论.着重分析了合成孔径声纳成像过程中高分辨率的获取方法、水声信道对成像的影响、多子阵技术及其成像算法、稳定的声纳运动平台和运动监测问题、运动补偿与自聚焦方法等.文章还给出了国内外合成孔径声纳研究的最新进展情况,进而展望了合成孔径声纳的应用前景.