Voltammetric behavior and determination of bismuth on sodium humate modified carbon paste electrode

The preconcentration and voltammetric behavior of Bi^III on a sodium humate modified carbon paste electrode was studied by means of cyclic voltammetry (CV) and differential pulse stripping voltammetry (DPSV). The proposed measurement involves an initial nonelectrolytic preconcentration step in which Bi^III is complexed by the surface modifier in a solution of 0.05 M KNO₃-0.0106 M HNO₃ (pH 2.0) and a subsequent electrochemical scan step in which the preconcentrated Bi^III was reduced and then oxidized promptly in supporting electrolyte of 0.5 M HNO₃. The resulting DPSV anodic current was proportional to the concentration of Bi^III ion over the range of 4.78 × 10⁻⁸–1.44 × 10⁻⁵ M. The detection limit was 4.78 × 10⁻⁸ M. The proposed method was used to determine bismuth in various samples. Various factors affecting the electrode behavior were also investigated at the same time.     

Synthesis of metal/polymer nanocomposite by UV-radiation curing

Nanocomposite polymers containing bismuth nanoparticles (2 wt%) have been obtained by photopolymerization of acrylic resins. The bismuth nanoparticles have been synthesized by reduction of BiCl₃ with t-BuONa activated sodium hydride. In situ t-BuONa stabilization protects the metallic particles against aggregation. Transmission electron microscopy (TEM) analysis has shown that the bismuth nanoparticles are well dispersed in the acrylic resin. The curing process was followed quantitatively by infrared spectroscopy through the decrease upon UV exposure of the IR bands characteristic of the functional groups. The bismuth nanoparticles were found to have no detrimental effect on the photopolymerization kinetics. Dynamic mechanical analysis (DMA) has shown that the viscoelastic properties of the nanocomposite photopolymer are significantly modified in comparison with corresponding UV-cured polymer. The addition of metal nanoparticles was found to greatly reduce the gloss of UV-cured coatings.     

Heat capacity, enthalpy and entropy of bismuth niobate and bismuth tantalate

The heat capacity and the heat content of bismuth niobate BiNbO₄ and bismuth tantalate BiTaO₄ were measured by the relaxation method and Calvet-type heat flux calorimetry. The temperature dependencies of the heat capacities in the form C_pm=128.628+0.03340 T−1991055/T²+136273131/T³ (J K^-1 mol^-1) and 133.594+0.02539 T−2734386/T²+235597393/T³ (J K^-1 mol^-1) were derived for BiNbO₄ and BiTaO₄, respectively, by the least-squares method from the experimental data. Furthermore, the standard molar entropies at 298.15 K S_m(BiNbO₄)=147.86 J K^-1 mol^-1 and S_m(BiTaO₄)=149.11 J K^-1 mol^-1 were assessed from the low temperature heat capacity measurements. To complete a set of thermodynamic data of these mixed oxides an attempt was made to estimate the values of the heat of formation from the constituent binary oxides.     

Synthese und Kristallstruktur von [(Me3Si)2BiCu(PMe3)3], dem ersten Komplex mit einer Bismut—Kupfer‐Bindung

Synthesis and Crystal Structure of [(Me₃Si)₂BiCu(PMe₃)₃] — the First Complex with a Bismuth—Copper Bond The reaction of CuO^t Bu with PMe₃ and Bi(SiMe₃)₃ in hexane yields the phosphine‐stabilized complex [(Me₃Si)₂Bi‐Cu( PMe₃)₃]. This synthesis gave rise to the first binuclear Bi—Cu compound to be structurally characterized by X‐ray crystallography.     

Flow injection determination of bismuth in urine by successive retention of Bi(III) and tetrahydroborate(III) on an anion-exchange resin and hydride generation atomic absorption spectrometry

Bismuth as BiCl₄⁻ and BH₄⁻ ware successively retained in a column (150 mm × 4 mm, length × i.d.) packed with Amberlite IRA-410 (strong anion-exchange resin). This was followed by passage of an injected slug of hydrochloric acid resulting in bismuthine generation (BiH₃). BiH₃ was stripped from the eluent solution by the addition of a nitrogen flow and the bulk phases were separated in a gas–liquid separator. Finally, bismutine was atomized in a quartz tube for the subsequent detection of bismuth by atomic absorption spectrometry. Different halide complexes of bismuth (namely, BiBr₄⁻, BiI₄⁻ and BiCl₄⁻) were tested for its pre-concentration, being the chloride complexes which produced the best results. Therefore, a concentration of 0.3 mol l⁻¹ of HCl was added to the samples and calibration solutions. A linear response was obtained between the detection limit (3σ) of 0.225 and 80 μg l⁻¹. The R.S.D.% (n = 10) for a solution containing 50 μg l⁻¹ of Bi was 0.85%. The tolerance of the system to interferences was evaluated by investigating the effect of the following ions: Cu²⁺, Co²⁺, Ni²⁺, Fe³⁺, Cd²⁺, Pb²⁺, Hg²⁺, Zn²⁺, and Mg²⁺. The most severe depression was caused by Hg²⁺, which at 60 mg l⁻¹ caused a 5% depression on the signal. For the other cations, concentrations between 1000 and 10,000 mg l⁻¹ could be tolerated. The system was applied to the determination of Bi in urine of patients under therapy with bismuth subcitrate. The recovery of spikes of 5 and 50 μg l⁻¹ of Bi added to the samples prior to digestion with HNO₃ and H₂O₂ was in satisfactory ranges from 95.0 to 101.0%. The concentrations of bismuth found in six selected samples using this procedure were in good agreement with those obtained by an alternative technique (ETAAS). Finally, the concentration of Bi determined in urine before and after 3 days of treatment were 1.94 ± 1.26 and 9.02 ± 5.82 μg l⁻¹, respectively.     

Structural Study of an Unusual Cubic Pyrochlore Bi1.5Zn0.92Nb1.5O6.92

Single-phase pyrochlore-type specimens of Bi_1.5Zn_0.92Nb_1.5O_6.92 were studied using combined electron, X-ray and neutron powder diffraction techniques. Rietveld refinements using neutron powder diffraction data confirmed an average pyrochlore structure A₂B₂O₆O′ (Fd&3macr;m, a=10.5616(1) Å) with both Bi and Zn mixed on the A-sites. However, refinements revealed significant local deviations from the ideal pyrochlore arrangement which were caused by apparent displacive disorder on both the A and O′ sites. The best fit was obtained with a disordered model in which the A-cations were randomly displaced by ∼0.39 Å from the ideal eight-fold coordinated positions. The displacements occur along the six 〈112〉 directions perpendicular to the O′-A-O′ links. In addition, the O′ ions were randomly displaced by ∼0.46 Å along all 12 〈110〉 directions. Crystal-chemical considerations suggest the existence of short-range correlations between the O′ displacements and both the occupancy of the A-sites (i.e., Bi or Zn) and the directions of the A-cation displacements. The combined A-cation and O′ displacements change the coordination sphere of the A-cations from 8 to (5+3); the resulting coordination environment of the A-cations bears similarities to that of the (5+1)coordinated Zn in zirconolite-like Bi₂Zn_2/3Nb_4/3O₇. The observed displacive disorder in the A₂O′ network of the Bi_1.5Zn_0.92Nb_1.5O_6.92 structure involves atoms associated with the lowest-frequency vibrational bending mode, and is likely responsible for both the high dielectric constant and the dielectric relaxation reported for this compound.     

Environment friendly organic synthesis using bismuth compounds. An efficient method for carbonyl-ene reactions catalyzed by bismuth triflate

Bismuth triflate (0.1 mol %) is a highly efficient catalyst for the cyclization of citronellal 1, a reaction that yields a ratio of 80:20 of isopulegol 2 and neoisopulegol 3. This methodology has also been extended to the synthesis of substituted piperidines. The bismuth triflate catalyzed ene reaction of aldehyde 4 gives a 70:30 mixture of piperidines 5 and 6. The advantages of these methods include the use of a highly efficient catalyst that is relatively nontoxic, cheap and easy to handle.     

Simultaneous Determination of Copper and Bismuth by Anodic Stripping Voltammetry Using H‐Point Standard Addition Method with Simultaneous Addition of Analytes

Simultaneous determination of bismuth and copper by anodic stripping voltammetry using H‐point standard addition method (HPSAM) with simultaneous addition of analytes is described. The effect of various parameters including acid concentration, accumulation time, accumulation potential and concentration ratio of analytes in the standard solution on the sensitivity and accuracy of method were investigated. The results of applying the H‐point standard addition method showed that Cu²⁺ and Bi³⁺ could be determined simultaneously with the concentration ratios of Cu²⁺ to Bi³⁺ varying from 1 : 15 to 16 : 1 in the mixed sample. The method was successfully applied to the simultaneous determination of copper and bismuth in some synthetic mixtures.     

Determination of traces of bismuth by quenching of solid-substrate room-temperature phosphorescence from morin-labeled silicon dioxide nano-particles

Silicon dioxide nano-particles, diameter 50 nm, containing morin (morin–SiO₂) have been synthesized by the sol–gel method. They emit strong and stable room-temperature phosphorescence (SS-RTP) on filter paper as substrate, and bismuth can quench the intensity of the SS-RTP. On this basis a new morin–SiO₂ solid-substrate room-temperature phosphorescence-quenching method has been established for determination of traces of bismuth. Reduction of phosphorescence intensity (I_p) is directly proportional to the concentration of bismuth in the working range 0.16–14.4 ag spot^–1 (sample volume 0.40 L spot^–1, corresponding to the concentration range 0.40–36.0 fg mL^–1). The regression equation of the working curve is I_p=14.86+5.279×[Bi³⁺] (ag spot^–1) (n=6, r=0.9982). The detection limit of this method is 0.026 ag spot^–1 (corresponding to a concentration of 6.5×10^–17 g mL^–1).This sensitive, reproducible and accurate method has been used for successful analysis of real samples.     

Old Reagent,New Results: Aromatization of Hantzsch 1,4-Dihydropyridines with Supported Bismuth Nitrate under Microwave Irradiation in Solventless System

Hantzsch 1,4-dihydropyriines were rapidly and efficiently oxidized using bismuth nitrate supported onto silica gel under microwave irradiation.