氮化铝薄膜的光学性能

分别使用X衍射仪和紫外（190 nm～800 nm）分光光度仪,测量了用分子束外延法生长在SiC（001）基底面上的AIN薄膜的X衍射、透射谱和不同温度下的吸收谱.X衍射表明:实验所用的AIN薄膜在c-轴存在应变和应力，该应变和应力主要是由于AIN的晶格常量与基底SiC的晶格常量不匹配所致.透射谱表明:AIN薄膜的禁带宽度大约为6.2eV；而其对应的吸收谱在6.2eV处存在一个明显的台阶,此台阶被认为是AIN薄膜中的带边自由激子吸收所产生,忽略激子的结合能(与禁带宽度相比),则该值就对应为AIN的禁带宽度.而其对应的不同温度下（10 k～293 k）的吸收谱的谱线的形状和位置无明显的变化表明:温度对AIN薄膜的禁带宽度亦无明显的影响，这主要是由于在AIN薄膜中存在着应力所致.     

三甲基硅、三甲基锗和三甲基锡取代的一系列芘衍生物的紫外吸收和荧光性质

被三甲基硅(Me3Si-)、三甲基锗(Me3Ge-)和三甲基锡(Me3Sn-)取代的芘衍生的紫外吸收波长和未取代的芘相比较,波长红移.一,二,三,四取代三甲基硅芘最大吸收波长红移小于10nm.荧光强度和周期按Me3SiAr＞Me3GeAr＞Me3SnAr顺序减弱.1,3,6,8-四-三甲基硅芘的荧光强度在一系列芘衍生物中是最大的.     

Acoustic characterization and prediction for fan-duct-plenum-room integrations

This paper investigates mutual influence of duct and room acoustics in the whole fan-duct-plenum-room integrations. Applying the parametric design language of finite element software ANSYS (APDL), dimensional and positional influence on system acoustics has been studied. Models with different room dimensions, duct lengths, duct cross-sections, duct locations, duct discharges and duct elbow were constructed, and their characteristics were compared qualitatively. Results show that small rooms, short ducts, large duct cross-sections and bell mouth duct discharges help to increase room sound pressure levels (SPLs); SPLs in ducts and plenums are sensitive to duct dimensions and duct discharge types but insensitive to duct locations and room dimensions; duct elbows have relatively indistinct acoustic influence in each component. Based on the calculation results, a semi-experimental method was proposed for simply and approximately evaluating indoor acoustic spectra of fan-duct-plenum-room integrations, then an example was used to demonstrate the prediction process. Finally, by adopting several ideal models, sound field constitutions, duct and room wall admittances and duct end reflection were explored quantitatively. This study may give a detailed understanding of fan-duct-plenum-room acoustics for researchers, also it might provide a new, simple and approximate prediction method for professionals to evaluate and improve fan-ducted acoustics.     

First-principles study on the origin of optical transitions to be associated with F colour centers for PbWO4 crystals

The electronic structures of PbWO₄ crystals containing F type color centers with the lattice structure optimized are studied within the framework of the fully relativistic self-consistent Direc–Slater theory, using a numerically discrete variational (DV-Xα) method. The calculated results show that F and F⁺ centers have donor energy level in forbidden band. Their optical transition energy are 1.84 eV, 2.21 eV, respectively, which corresponds to the 680 nm, 550 nm absorption bands. It predicts that the 680 nm, 550 nm absorption bands originate form the F and F⁺ centers in PbWO₄ crystals.     

Optimization of the locations of the loudspeaker and absorption material in a small room

The sound field both in the loudspeaker box and in the room is calculated by an analytical solution of three-dimensional wave equation. It is shown in theory that the amplitude response in small rooms is affected by the following positions: driver position on the front panel of the box, box position in the room, absorption material position in the box and absorption material position on the interior walls of the room. Both our computer prediction and experiments prove that the optimum positions are beneficial to the amplitude response.     

Application of Pulsed Traveling Hydrogen Arcs for Metal Oxide Reduction

A plasma reactor that has a transient traveling arc has been used to study hydrogen in relation to in-flight reduction of metal oxide particles. Experiments were done to determine the nature of the arc and its interaction with the reactor gas. The lifetime of the excited atomic hydrogen was measured and it was found to be more than 4 ms after the arc had ceased. Powders and tablets of oxides were exposed to the pulsed-arc treated hydrogen and found to react much more rapidly and intensely than when exposed to hot molecular hydrogen. The results suggest that atomic hydrogen will exist throughout the volume of such a reactor for a period that is sufficient to reduce particles of FeO, Cr₂O₃, and TiO₂.     

火焰原子吸收法测定霞石中的氧化钾和氧化钠

本方法用于测定霞石中的钾、钠，主要通过在溶样时加入氢氟酸除去二氧化硅，调整溶液中钾、钠的含量，消除互相之间的干扰，加入氯化铯消除电离因素的干扰，提高了分析结果的准确性和重现性，使测定结果更接近化学分析值。回收率为99．2％-101．6％。     

Weighted oscillator strengths and lifetimes for the S IX and S X spectra

The weighted oscillator strengths (gf) and the lifetimes presented in this work were carried out in a multi configuration Hartree-Fock relativistic (HFR) approach. In this calculation, the electrostatic parameters were optimized by a least-squares procedure, in order to improve the adjustment to experimental energy levels. This method produces gf-values that are in better agreement with intensity observations and lifetime values that are closer to the experimental ones. In this work, we presented all the experimentally known electric dipole S IX and S X spectral lines.     

Differentiation between tracks and damages in SSNTD under the atomic force microscope

We have observed three-dimensional sponge-like structures as well as strips of connecting pits on the surface of the LR 115 detector after etching, which can be confused with the small tracks formed after short etching time. We have employed an atomic force microscope (AFM) to study these “damages” as well as genuine alpha tracks for short etching time. It was found that while the track and damage openings could be similar in size and shape, the depths for the damages were consistently smaller. Therefore, the depth of the pits will serve as a clear criterion to differentiate between tracks and other damages. The ability to discriminate between genuine tracks from other damages is most important for etching for short time intervals.     

Diffusion of 99Tc in granite under aerobic and anoxic conditions

Summary  Vezetéknév