氢化物发生石墨炉原位富集直接测定高温镍基合金中碲

通过选择碲的氢化物发生条件，克服了高含量镍对碲的干扰，把氢化物富集在涂钯石墨管里，然后再原子化，成功地测定了高温镍基合金中碲。     

Segregation of Sn in the binary CuSn and ternary CuSnSb alloy systems

Progression studies have been followed from Cu(111)‐ and Cu(100)Sn binaries to Cu(111)‐ and Cu(100)SnSb ternary‐alloy systems under the same experimental conditions. The segregation behaviour of Sn in the two orientations are explained. It is found that the kinetic segregation profiles of Sn in the ternary alloys shift to lower temperatures as compared to that in the binary. The Sn profile shift is mainly due to the decrease in the activation energy of Sn in the ternary systems. For a particular Cu orientation, the other segregation parameters that the Sn profiles depend on, like the pre‐exponential factor, segregation energy and the interaction coefficient, are found to be the same in the two systems. There is also a change in the equilibrium segregation profiles of Sn. In the ternary system, site competition between Sn and Sb causes the Sn to suffer exponential desegregation and eventual displacement from the surface. Copyright © 2006 John Wiley & Sons, Ltd.     

非晶态Fe－W合金镀层的表面改性

将Ｆｅ－Ｗ非晶态镀层在铬酸盐钝化液中进行化学钝化与电化学钝化，使之形成含铬钝化膜。阳极极化曲线说明，钝化后镀层的孔蚀电位向正向移动了约１．６８Ｖ；Ｆｅ－Ｗ非晶镀层在氯化钠溶液中浸泡近１ｈ表面发生严重腐蚀，而经钝化处理的镀层浸泡１个月，表面无变化，仍具有金属光泽。     

微量稀土对超导稳定化基体铜材的性能和组织的影响

研究了微量稀土元素对铜的机械性能、导电性和组织的影响，在铜中加入微量钇、钕、镝、铒和富铈混合稀土后，使铜的抗拉强度有所提高，并保持良好的塑性和导电性。     

从氨性柠檬酸溶液中电沉积Ni-Mo的机理研究

含钼大于约27％（质量分数）Ni－Mo合金，具有较高的耐蚀性，特别是在盐酸和硫酸溶液中，其耐蚀性优于SUS304不锈钢［1］．因此，人们对该种合金的电沉积进行了广泛的研究［1－4］．对合金共沉积机理也作了一定的研究．一般认为，钼不能单独进行电沉积，但它可以同铁族元素共沉积［5］．对钼与铁族元素的共沉积机理，人们已提出了几种假设．一般认为［3］，钼可能是多步还原，即六价钼首先被电化学还原成低价钼化合物，而后由吸附在诱导金属（铁族元素）上的原子氢进一步还原成合金中的零价钼，为了进一步弄清Ni－Mo合金的共沉积机理，本…     

离子交换树脂预处理/离子色谱法测定镁铝合金中微量氯

镁铝合金试样用稀硫酸溶解后通过装有强酸性阳离子交换树脂的分离柱以除去试样溶液中大量镁及铝离子。通过交换柱的试液以及洗涤交换柱用的高纯水接受于1 L容量瓶中,用高纯水定容。分取25μL试液作离子色谱测定氯,对离子交换分离及离子色谱测定的条件作了试验和优化。离子色谱测定氯离子的标准曲线的相关系数为0.999 1,方法的检出限为1.03μg.L-1。根据精密度试验结果计算得其相对标准偏为4.5%。在6个试样中各加氯标准200.0 mg.kg-1作回收率试验,所得结果在94.1%~106.0%之间。     

Investigation of hydrogen embrittlement of Sn–Al alloy during contact with water vapour

The humid air induced processes of embrittlement of the Sn–Al alloy and hydrogen emission have been investigated. Using the secondary-ion mass spectrometry, X-ray, scanning electron microscopy and energy-dispersive X-ray spectrometry techniques it was found that the brittleness is caused by a failure of phase adhesion due to accumulation of hydrogen and formation of oxidized layers on phase boundaries during contact of the alloy with water vapour. Specific physical and electrochemical properties of the Sn/Al phase boundary satisfy conditions for the formation of atomic hydrogen and its reaction with Sn. Electrochemical corrosion plays an important role at the stage of formation of atomic hydrogen. The penetration of hydrogen and its accumulation in the bulk of the alloy is due to the high energy of the phase boundary and the low energy of formation of unstable tin hydride. Electronic Publication     

Clusters,metastability, and nucleation: Kinetics of first-order phase transitions

We describe and interpret computer simulations of the time evolution of a binary alloy on a cubic lattice, with nearest neighbor interactions favoring like pairs of atoms. Initially the atoms are arranged at random; the time evolution proceeds by random interchanges of nearest neighbor pairs, using probabilities compatible with the equilibrium Gibbs distribution at temperatureT. For temperatures 0.59T_c, 0.81 T_c, and 0.89T _c, with density of A atoms equal to that in the B-rich phase at coexistence, the density C₁ of clusters ofl A atoms approximately satisfies the following empirical formulas: C₁ w(1 –)³ andC ₁, (1 –)⁴Q₁w¹ (2 l 10). Herew is a parameter and we defineQ _l = _K e ^–E(K) , where the sum goes over all translationally nonequivalentl-particle clusters andE(K) is the energy of formation of the clusterK. Forl > 10,Q ₁ is not known exactly; so we use an extrapolation formulaQ _l Aw _s ^–l l ^– exp(–bl ), wherew _s is the value ofw at coexistence. The same formula (withw > w _s) also fits the observed values of C, (for small values ofl) at densities greater than the coexistence density (forT=0.59T_c): When the supersaturation is small, the simulations show apparently metastable states, a theoretical estimate of whose lifetime is compatible with the observations. For higher supersaturation the system is observed to undergo a slow process of segregation into two coexisting phases (andw therefore changes slowly with time). These results may be interpreted as a more quantitative formulation (and confirmation) of ideas used in standard nucleation theory. No evidence for a spinodal transition is found.Supported by AFOSR Grant No. 73-2430D and by ERDA Contract No. EY-76-C-02-3077*000.     

Characteristics of Subtractive Anodic Stripping Voltammetry of Lead,Cadmium and Thallium at Silver‐Gold Alloy Electrodes

Silver‐gold alloy electrodes have been studied for the purpose of the quantitative determination of heavy metals by subtractive anodic stripping voltammetry, (SASV). The results have been compared with those obtained with the silver and gold electrodes. The 50/50 a/o Ag/Au alloy electrode is the most suitable for quantifying thallium in the presence of lead and cadmium. The separation of its peak from those of lead and cadmium is 200 mV, which is about twice the separation obtained on the pure metal electrodes and is also better than on mercury. The silver electrode is suitable for the simultaneous determination of thallium, lead and cadmium. The peaks of lead and cadmium overlap on the 50/50 alloy. Pure silver or pure gold can be used for simultaneous quantification of these two metals. The use of gold for quantifying lead and cadmium is more limited because the peak potential of cadmium is shifted in the negative direction as its concentration increases and at [Cd²⁺]>200 nM, the two peaks merge. SASV enables correction for background currents and is of utmost importance for obtaining well‐defined peaks. The peaks of lead, cadmium and thallium appear over a relatively narrow potential range (ca. 200 mV) on all the electrodes presented in this work. For this reason, the quantifying of a peak is based on the derivative at the inflection point of only one of its branches (ascending or descending). All SASV measurements were carried out without removal of oxygen.     

Performance of Pt/SnO2 catalyst in the gas phase hydrogenation of crotonaldehyde

Selective hydrogenation of crotonaldehyde was performed on 5% Pt/SnO₂ catalysts, in gaseous phase, at atmospheric pressure, at 353 K. Two types of catalyst were prepared using H₂PtCl₆ and Pt(NH₃)₄(NO₃)₂ as metallic precursors. Their performances were compared as a function of the reduction temperature and both catalysts were characterised by X-ray diffraction after different reduction treatments. Using the ex-chloride catalyst, the selectivity values to the unsaturated alcohol (UOL) resulted into a maximum of 45% while a selectivity as high as 70–77%, in 0–25% conversion range, was achieved by using ex-nitrate catalyst reduced at 443 K. The formation of Pt–Sn alloy on the metal particles of platinum was thought to be necessary to improve the activity and the selectivity on these catalysts. In the contrast, a presence of PtSn₂ formed at a reduction temperature higher than 473 K led to a decrease of activity and selectivity.