消除预脉冲电压的撬棒管开关法

 分析了脉冲线加速器在放电过程中产生的预脉冲电压现象。为了减少预脉冲电压引起的等离子体发射对正常状态的影响，采用了一种冷阴极撬棒管，将它与阴极杆相连。实验证明在采用了这种器件后，预脉冲电压可以从150kV左右减少到50kV。相对论返波管和相对论磁控管的性能得以显著改善。     

高考预效度的混合估计

用传统的预测效度估计法估计高考预测效度，其估计值往往偏低。为此，本文应用回归分析中混合估计理论提出了高考预测效度的混合估计。这种估计是预测效度的无偏估计，并解决了预测效度估计值偏低的问题。     

溶胶—凝胶法制备SiO2基片Er^3＋：Al2O3光学薄膜

用溶胶—凝胶法在SiO2基片上提拉制备了掺Er^3 ：Al2O3光学薄膜。采用扫描电子显微镜、原子力显微镜、差热—热重分析仪、X射线衍射仪研究了掺Er^3 ：Al2O3光学薄膜的肜貌和结构特性。在900℃烧结后，SiO2基片上提拉15次形成厚度8μm掺摩尔比0．01Er^3 的面心立方结构γ-Al2O3薄膜具有明显(110)择优取向，掺摩尔比0．01Er^3 对γ—Al2O3的品体结构和结晶生长过程木产生显著影响。薄膜具有均匀多孔结构，平均粒径为30～100nm，平均孔径为50～100nm，表面起伏度为10～20nm。掺摩尔比0．01Er^3 ：rAl2O3薄膜，获得了中心波长为1．534μm(半峰全宽为36nm)的光敛发光谱。     

Low-Temperature Growth of Polycrystalline silicon Films by SiCl4／H2 rf Plasma Enhanced Chemical Vapour Deposition

Polycrystalline silicon film was directly fabricated at 200℃ by the conventional plasma enhanced chemical vapour deposition method from SiCl4 with H2 dilution. The crystallization depends strongly on the deposition power.The maximum crystMlinity and the crystalline grain size are over 80% and 200—50Onm, respectively. The results of energy dispersive spectroscopy and infrared spectroscopy measurements demonstrate that the film is mostly composed of silicon, without impurities such as Cl, N, C and bonded H. It is suggested that the crystallization at such a low temperature originates from the effects of chlorine, i.e., in-situ chemical, etching, in-situ chemical cleaning, and the detachment of bonded H.     

一道自编排列组合综合问题的两个视角五个入口

下面是笔者根据2005年全国高中数学联赛浙江省预选题改编而成的一道排列组合综合问题，它的视角较多，解题入口很宽，现将该题的两个视角五个入口展示给读者．     

一种求解混合多目标规划问题的功效函数法

逻辑生长函数相对于龚珀兹生长函数具有拐点高和对称性的特点,采用逻辑生长函数形式的功效函数法求解混合多目标规划问题具有形式简单、计算量小、符合实际的优点。证明了用这种方法求出的最优解是有效解。讨论了满意值对有效解的影响。逻辑生长函数还可以应用于多维变量评价的功效系数法中。     

中高温工质在蒸发器中的换热模拟分析

本文采用分布参数的方法,建立了水源热泵中普遍采用的壳管式蒸发器稳态数学模型.通过中高温水源热泵试验台的实验数据同模拟计算结果的对比,验证了数学模型的准确性。应用此数学模型对中高温工质HTR01、HTR02及R134a在蒸发器典型制热运行工况,进行了模拟计算。得出了三种工质制冷剂侧换热系数沿管长的变化关系并对三种工质的换热性能进行了对比分析,为采用中高温工质的水源热泵换热器设计提供了参考依据.     

用等离子体治疗牙病

等离子体清洗经常使用在材料处理和半导体工业上，虽然等离子体也可以快速地消灭细菌，但由于它们都处于高温状态，所以一直无法应用到生物医学领域．三年前，荷兰Eindhoven大学的一些物理学家发展了一种可在室温下工作的“等离子体针”。     

Effect of Incident Intensity on Films Growth in Pulsed Laser Deposition

Incident intensity, defined by the amount of particles deposited per pulse, is an important parameter in the film growth process of pulsed laser deposition （PLD）. Different from previous models, we investigate the irreversible and reversible growth processes by using a kinetic Monte Carlo method and find that island density and film morphology strongly depend on pulse intensity. At higher pulse intensities, lots of adatoms instantaneously diffuse on the substrate surface, and then nucleation easily occurs between the moving adatoms resulting in more smaller-size islands. In contrast, at the lower pulse intensities, nucleation event occurs preferentially between the single adatom and existing islands rather than forming new islands, and therefore the average island size becomes larger in this case. Additionally, our results show that substrate temperature plays an important role in film growth. In particular, it can determine the films shape and weaken the effect of pulse intensity on film growth at the lower temperatures by controlling the mobility rate of atoms. Our results can match the related theoretical and experimental results.     

Nd—Ba—Cu—O高温超导体的高分辨电子显微术研究

用电子衍射和高分辨电子显微术研究了Nd-Ba-Cu-O高温超导体,主相属正交晶系,具有畸变钙钛矿亚结构的三倍超结构,晶胞参数为a=3.84,b=3.87,c=11.7,样品中存在大量的缺陷,用点阵象技术观察到刃位错,反向畴,并借助结构象确定了NdBa_2Cu_3O_(-)的结构模型。在不同成象条件下,高分辨电子显微象上或者重原子为白点,或者氧原子为白点,当成象条件适当时,可以在象上区分氧原子和氧空位。