激光通道传输热特性对远场光束质量的影响

 通过仿真计算分析了激光在光束控制系统通道内传输所产生的热效应及其对远场光束质量的影响。激光传播由近轴波方程描述，用快速傅里叶变换技术求解；激光热效应引起的流场密度变化采用完全Navier-Stokes方程计算。计算给出了不同波长、不同吸收系数条件下的远场光斑情况。计算结果表明，在典型的工作条件和状态下，较高能量激光在光束控制系统通道内产生的热效应影响不容忽视，它会明显降低远场目标处的能量集中度，增大光斑的发散。     

647W灯泵浦大功率连续Nd:YAG激光器

 报道了一台灯泵浦大功率连续Nd:YAG激光器。对影响大功率固体激光器模块输出功率和光束质量的主要因素进行了理论分析，并提出提高激光器效率的措施：对聚光腔的形状、结构和材料以及冷却方式，泵浦灯的参数和材料，激光晶体的参数和镀膜进行优化设计，采用径向固定的谐振腔镜。该灯泵浦YAG晶体棒总体电光转换效率为4%，光束质量为22mm·mrad，输出功率647W。     

颈内静脉原位导丝法换置中心静脉长期血液透析导管的临床应用

目的探讨经颈内静脉原位导丝法换置中心静脉长期血液透析导管在维持性血液透析（MHD）患者中的应用价值。方法选取近3年在颈内静脉留置的中心静脉长期血液透析导管因功能障碍后，并经颈内静脉原位导丝法换置长期导管，术后及每次透析后均改用尿激酶封管患者16例（原位换置组）；选取同期首次经颈内静脉留置中心静脉长期血液透析导管,普通肝素封管患者20例作为对照组；分析两组患者围术期泵控血流量及随访期的反应及开存期率、次开存期率。结果围术期泵控血流量原位换置组高于对照组，有统计学差异（P＜0.05）；两组比较感染例次/1000导管日0.9%与1.0%，无统计学差异（P＞0.05）。原位换置组围术期未发生中重度并发症，12个月开存期率81.2%、次开存期率93.8%；对照组开存期率为65%、次开存期率85%；两组比较无统计学差异（P＞0.05）。结论颈内静脉原位导丝法换置中心静脉长期血液透析导管，在MHD患者中的使用是安全的、可行的。     

研究人员提出华北平原氧化亚氮减排新举措

据悉,中科院成都山地所蔡延江博士采用静态箱-气相色谱法,在河南省封丘县对不同施肥制度下玉米-小麦轮作体系的氧化亚氮排放进行了观测研究。结果显示,将一半有机肥与一半无机肥氮配施,能有效降低我国华北平原农田土壤氧化亚氮的排放。相关成果发表在《大气环境》杂志上。据了解,氧化亚氮是排在二氧化碳、甲烷之后的第三大温室气体,其单分子增温潜势是二氧化碳的298倍,其中农业生产及氮肥施用是氧化亚氮的重要排放源。过量施用氮肥导致的温室气体排放,已成为我国乃至全球农业可持续发展的严重威胁。此次研究人员通过对比长期定位试验地内不施肥(CK)与有机肥(OM)、有机肥氮和化肥氮各半     

Production of annular flat-topped vortex beams

A model of an annular flat-topped vortex beam based on multi-Gaussian superimposition is proposed.We experimentally produce this beam with a computer-generated hologram(CGH) displayed on a spatial light modulator(SLM).The power of the beam is concentrated on a single-ring structure and has an extremely strong radial intensity gradient.This beam facilitates various applications ranging from Sisyphus atom cooling to micro-particle trapping.     

Laser output of radial-slab solid-state laser

In this letter, numerical simulation and experimental study of a radial-slab solid-state laser are presented. The laser includes four crossing-slabs pumped by four Xe flashlamps. The numerical simulation of coherent intensity in the near field and the far field indicates that the laser with the structure can improve the quality of output beam compared with incoherent beam combination. The radial-slab solid-state laser is fabricated, and initial experiments are carried out at a pulse repetition of 1 Hz. Nine beams in the near field and one combined beam in the far field are obtained in our initial experiment. The experimental results are consistent with the numerical analysis in the coherent condition. The results show that coherent beam combination is obtained by this laser.     

Relation between Airy beams and triple-cusp beams

Airy beams and triple-cusp beams are two kinds of accelerating beams. The propagation characteristics and internal topological structures of accelerating Airy beams are well understood because of the developed mathematical theory about Airy function. However, limited information is available about the optical characteristics of accelerating triple-cusp beams. In this work, the relationship between Airy beams and triple-cusp beams is examined theoretically and experimentally. Results reveal some important optical characteristics of triple-cusp beams based on the optical characteristics of Airy beams. These findings are expected to provide a foundation for future applications of triple-cusp beams.     

面向Li原子D1线频率测量应用的掺铒飞秒光纤光梳系统

报道了自主研制的面向Li原子D1线频率测量应用的掺铒飞秒光纤光学频率梳,包括飞秒激光源,频率探测及控制单元,光谱展宽及拍频单元.光纤光梳系统中飞秒激光光源是一套基于非线性偏振旋转锁模机制的掺铒飞秒光纤激光器,重复频率为196.5MHz,中心波长为1 572nm.利用f-2f法探测载波包络相移频率,获得信噪比约为40dB的信号(分辨率带宽300kHz).改变飞秒激光光源泵浦控制载波包络相移频率、频率稳定度是3.74×10-18/τ1/2;通过电光晶体和压电陶瓷改变飞秒激光光源腔长来控制重复频率frep、频率稳定度是1.75×10-13/τ1/2.利用高非线性光纤和倍频晶体将光纤光梳直接输出光谱由1 520～1 607nm扩展到671nm,获得了单模功率为208nW的光信号.与671nm单频激光拍频产生约为60dB(分辨率带宽1Hz)信号,满足Li原子D1线频率测量实验的需求.     

同心矢量完美涡旋模式的特性

完美涡旋光场模式的单一性难以满足其在多种领域的应用需求。为解决该问题,提出了一种同心矢量完美涡旋模式,其光强分布为一族同心的矢量完美涡旋,各环矢量完美涡旋的性质得到了验证。研究发现,每个完美涡旋的光环大小、偏振阶数等特征参数相互独立。对同心矢量完美涡旋模式光环叠加的实验表明,与标量完美涡旋光束叠加不同,矢量叠加产生的子涡旋会在特定位置消失,原因是两光环在该位置偏振正交。该研究极大地丰富了完美涡旋的模式分布,拓宽了完美涡旋在微操纵、光通信等领域的潜在应用。     

Fatigue damage behavior of a surface-mount electronic package under different cyclic applied loads

This paper studies and compares the effects of pull-pull and 3-point bending cyclic loadings on the mechanical fa- tigue damage behaviors of a solder joint in a surface-mount electronic package. The comparisons are based on experimental investigations using scanning electron microscopy （SEM） in-situ technology and nonlinear finite element modeling, respec- tively. The compared results indicate that there are different threshold levels of plastic strain for the initial damage of solder joints under two cyclic applied loads; meanwhile, fatigue crack initiation occurs at different locations, and the accumulation of equivalent plastic strain determines the trend and direction of fatigue crack propagation. In addition, simulation results of the fatigue damage process of solder joints considering a constitutive model of damage initiation criteria for ductile materials and damage evolution based on accumulating inelastic hysteresis energy are identical to the experimental results. The actual fatigue life of the solder joint is almost the same and demonstrates that the FE modeling used in this study can provide an accurate prediction of solder joint fatigue failure.