Structural Characteristics of Liquid Sn

We investigate the structural properties of liquid Sn. With the help of the internal friction (tanФ) method, it is found that a peak appears in the tan Ф - T curve, suggesting that an anomalous discontinuous temperatureinduced structure change may take place in liquid Sn. From the experimental data of pair distribution functions, we calculate the viscosity η and the excess entropy S and it is found that there are a peak of viscosity in the η-T curve and a bend of excess entropy in the S - T curve, which give a positive support to the appearance of the internal-friction peak in the tan Ф- T curve.     

Experimental Study of Effect of Medium Boundary on Light Distribution in Tissue Phantoms

An experimental method for investigating the effect of medium boundary on distributions of light in the biological tissue phantom intralipid is presented. Measurements of distributions of light in intralipid-10% suspensions at 633 nm are described, in which a narrow collimated beam is incident on the surface of the phantoms and into the different depths inside of the phantoms. The experimental results show that the effect of the boundary of the medium on the curves geometry of light distributions is trivial, but the effect on intensity of scattering light is obvious, the maximal relative change of the energy fluence reaches 53.8% and the position of the peak of the energy fluence curve has a shift of 1.1 mm in the reverse direction of incident light for the phantom with albedo a=0.998, and the effect of the boundary is decreased with the increase of the absorption coefficients of tissue phantoms. The experimental results were analysed by the diffusion theory. These studies will be helpful for further understandings of the relation between the boundary of biological tissue and the distribution of light in tissue.     

12kW二极管泵浦激光模块

二极管泵浦固体激光器（DPL）具有寿命长、热负载小、结构紧凑等优点，在工业加工、军事、通讯等领域都得到了广泛的应用。在高光束质量、高平均功率DPL激光器的研究中，目前普遍采用MOPA结构的光路布局——由谐振腔产生出低功率的单横模激光输出，经多路放大后达到满足需求的功率水平。而激光放大模块作为放大光路中的核心部件，其增益分布特性将直接影响到光束放大过程中的波前变化，因此如何在提高激光放大模块储能的同时提高模块增益分布的均匀性，从而减少光路放大过程的波前畸变，对于进一步研制高平均功率、高光束质量的半导体泵浦固体激光器具有非常重要的意义。     

连续激光诱导Zn/InP掺杂过程中温度分布的解析计算

在实验的基础上，分析表面蒸发Zn的InP样品在连续激光诱导下掺杂Zn过程.在一维热传导问题的第三类边界条件下，给出激光辐照有限厚双层材料Zn/InP温度分布的一种直观简洁的解析形式. 关键词： 激光诱导掺杂 Zn/InP 温度分布     

相对论重离子碰撞实验中混合事件方法的研究

把RQMD(Relativistic Quantum Molecular Dynamics)产生器产生的数据输入作为原始事例取样,讨论了在比较复杂的背景情况下,一种新的混合事件方法,用以证实在相对论重离子碰撞实验中高能量激发共振态的存在.并以共振态重子Δ⁺⁺为例演示了这一方法的应用.     

铁铝催化体系催化丙烯酸丁酯聚合

研究了Fe(acac)3-Al(i-Bu)3-8-羟基喹啉(acac=乙酰丙酮)催化体系催化丙烯酸丁酯(BA)聚合，考察了聚合规律，用凝胶渗透色谱研究了聚合物分子量和分子量分布．动力学研究表明聚合反应对单体浓度呈一级关系，表观活化能为13．9kJ／mol．     

浅谈家用吊扇的调速方法

家用吊扇的核心部分是单相异步电动机,此绕组如图1,有一主绕组(工作绕组)与一串联电容器C的副绕组(启动绕组)相并联.这样做可使二绕组的电流在相位上相差90°,从而形成旋转磁场.转子的转动过程与三相异步电动机相似.     

CONVERGENCE OF CASCADE ALGORITHMS AND SMOOTHNESS OF REFINABLE DISTRIBUTIONS

In this paper, the author at first develops a method to study convergence of the cascade algorithm in a Banach space without stable assumption on the initial (see Theorem 2.1), and then applies the previous result on the convergence to characterizing compactly supported refinable distributions in fractional Sobolev spaces and Holder continuous spaces (see Theorems 3.1, 3.3, and 3.4). Finally the author applies the above characterization to choosing appropriate initial to guarantee the convergence of the cascade algorithm (see Theorem 4.2).     

声诱饵仿真试验系统

文章介绍了声诱饵仿真试验系统中的有关问题，包括：系统的组成、工作原理、对接装置结构等。建立了对接装置声耦合状态下的数学模型，对近场声压分布进行了仿真计算，得出了匹配材料厚度、发射和接收换能器的选取原则。     

基于MATLAB的异步电动机线性化控制系统的仿真

从异步电动机在同步旋转坐标系下的状态方程出发，在一定的条件下，对其系数矩阵简化．推出异步电动机的线性化控制模型．并基于该模型得出异步电动机的线性化控制系统．以给定电机为例，对该模型的有效性、响应用MATLAB进行仿真分析．验证的结果说明上述模型具有实用价值．