邻苯二甲酸二烯丙酯和甲基丙烯酸甲酯共聚物梯度折射率棒制备过程的研究

<正> 梯度折射率棒是折射率沿径向或轴向连续变化的透明圆棒,具有光自聚焦性能。可用于制作自聚焦型光纤维和自焦聚透镜。用玻璃制得的梯度棒直径和折射率差都很小。近年来,开始研究高分子梯度棒,据估计其直径可望达到100mm,折射率差也可达0.1。本文采用二元掖体扩散共聚法,制得梯度棒,其径向折射率分布接近于抛物线型。     

Densities,Ultrasonic Speeds,Viscosities and Refractive Indices of Binary Mixtures of Benzene with Benzyl Alcohol,Benzonitrile, Benzoyl Chloride and Chlorobenzene at 303.15 K

Densities,ρ, ultrasonic speeds, u, viscosities,η, and refractive indices, n, of pure benzene, benzyl alcohol (BA), benzonitrile (BN), benzoyl chloride (BC), chlorobenzene (CB) and their thirty six binary mixtures, with benzene as common component, were measured at 303.15 K over the entire mole fraction range. From these experimental data the values of deviations in ultrasonic speed, △u, isentropic compressibility, △k_s,excess acoustic impedance, Z^E, deviation in viscosity, Dh, and excess Gibbs free energy of activation of viscous flow, G^*E, and partial molar isentropic compressibility, Kφ,2⁰ of BA, BN, BC and CB in benzene were computed. The variation of these derived functions with composition of the mixtures suggested the increased cohesion (molecular order) in the solution and that interaction (A-B)＞(A-A) or (B-B).Moreover, theoretical prediction of ultrasonic speed, viscosity and refractive index of all the four binary mixtures was made on the basis of empirical and semi-empirical relations by using the experimental values of the pure components. Comparison of theoretical results with the experimental values was made in order to assess the suitability of these relations in reproducing the experimental values of u, η and n. Also, molecular radii of pure liquids and the average molecular radii of binary mixtures were evaluated using the corresponding refractive indices of pure liquids and binary mixtures. The average molecular radii of binary mixtures were found to be additive with respect to mole fraction of the pure component.     

可交联聚甲基丙烯酸甲酯的合成、表征及在阵列式波导光栅中的应用

合成了含环氧基团的可交联的甲基丙烯酸甲酯和甲基丙烯酸环氧丙酯的共聚物[Poly(MMA-co-GMA)],通过FTIR,NMR,GPC,DSC和AFM等技术对其进行了表征. 结果表明,所合成的聚合物材料具有较好的成膜性; 通过热固化使引入的环氧基团开环交联,该聚合物的玻璃化转变温度(Tg)比固化前提高了24 K,同时有效地降低了聚合物的双折射率. 用Poly(MMA-co-GMA)作为包层材料,双酚A型环氧化合物作为高折射率材料, 将其引入到包层材料中形成芯层材料的折射率在波长1.55 μm处可调,其范围是1.483~1.588. 采用旋涂、 铝掩膜和氧反应离子刻蚀的方法(RIE)制得了阵列式光波导. 测试结果表明,制作的波导在1.55 μm处实现了光的单模传输,光损小于3.0 dB/cm.      

水+3-甲基吡啶+溴化钠三元溶液临界跨接现象

采用折射率法在较宽温度范围内研究了溴化钠、3-甲基吡啶和水的临界质量分数分别为0.240、0.192和0.568体系的临界性质, 发现在近临界点临界指数为0.365, 与Fishe重整化值一致. 有效临界指数随着温度逐渐远离临界点, 从0.365下降到0.20左右, 但当排除了“正规项”的影响后, 展现出向平均场理论值0.5单调跨接的行为.     

Volumetric and Refractive Index Behaviour of α-Amino Acids in Aqueous CTAB at Different Temperatures

Densities （ρ） and refractive indices （nD） of glycine （Gly）, DL-alanine （Ala）, DL-valine （Val） （0.02, 0.04, 0.06, 0.08, and 0.10 mol·L^-1） in 0.005 and 0.008 mol·L^-1 aqueous cetyltrimethylammonium bromide （CTAB） have been measured at 298.15, 303.15, 308.15, and 313.15 K. The density data have been utilized to calculate apparent molar volumes （φv）, partial molar volumes （φv^0）, at infinite dilution and partial molar volumes of transfer φv^0 （tr） of amino acids. The refractive index data have been used to calculate molar refractivity （Rr,） of amino acids in aqueous cetyltrimethylammonium bromide. It has been observed that φv^0 varies linearly with increasing number of carbon atoms in the alkyl chain of amino acids, and hence, was split to get contributions from the zwitterionic end groups （NH3^＋ COO^-） and methylene group （CH2） of the amino acids. The behaviour of these parameters has been used to investigate the solute-solute, solute-solvent interactions and the effect of cetyltrimethylammoniuln cation on these interactions,     

New method to solve electromagnetic parabolic equation

This paper puts forward a new method to solve the electromagnetic parabolic equation （EMPE） by taking the vertically-layered inhomogeneous characteristics of the atmospheric refractive index into account. First, the Fourier transform and the convo- lution theorem are employed, and the second-order partial differential equation, i.e., the EMPE, in the height space is transformed into first-order constant coefficient differential equations in the frequency space. Then, by use of the lower triangular characteristics of the coefficient matrix, the numerical solutions are designed. Through constructing ana- lytical solutions to the EMPE, the feasibility of the new method is validated. Finally, the numerical solutions to the new method are compared with those of the commonly used split-step Fourier algorithm.     

测定透光介质折射率的学生自主实验

以前的《教学大纲》对实验的要求是用统一的器材完成同一个实验,现在的《课程标准》对许多实验并没有规定用什么样的仪器来完成,更谈不上具体的操作步骤,这就给教师的实验教学带来更大的自主性.在测定玻璃的折射率实验中,利用学校现有的资源,笔者给学生提供了各种仪器,在教师的引导下,让学生自主选择、实施,有问题教师再进行指点     

太赫兹波段双频带手征性超表面的设计

提出一种具有巨旋光性和负折射特性的双频带手征性超表面结构,该手征性超表面由中间介质层和双层共轭卍字形周期排列而成;通过研究面电流密度分布,解释了巨旋光性和负折射率产生的原因;研究了手征性超表面单元结构的连续圆金属贴片半径和介质层厚度对该结构旋光性和负折射特性的影响。数值模拟结果表明:该结构在0.1～2 THz频率范围内有4个谐振频点,在谐振频点附近,平均折射率均为负值,实部幅值最大为-3.7;该结构在谐振频点附近显示了巨旋光性以及双频带的左旋圆偏振波和右旋圆偏振波负折射特性,最大偏振旋转角达到了122°,右旋圆偏振波折射率实部幅值可达-12.74。     

NSD样本最近邻密度估计的强相合性

本文研究负超可加相依样本的最近邻密度估计强相合性.利用负超可加相依序列的不等式与性质,获得最近邻密度估计的弱相合性、强相合性和一致强相合性.     

零折射率材料平板的透射特性研究

零折射率材料是近几年发展起来的一种新型超构材料.它性质奇特,应用广泛,不仅活跃在科研前沿,也很值得推介到物理课堂.本文从经典电动力学出发,理论分析并数值模拟了零折射率材料内部电场、磁场的分布特性,以及零折射率材料平板的电磁透射特性.结果表明:对于双零折射率材料的平板,在与空气阻抗匹配的条件下,其透过率不随平板厚度的变化而变化,大小始终保持为1;而单零折射率材料的平板的透过率随着平板厚度的增加而减小.文章进一步分析了产生这两种特殊透射特性的原因.研究结果对于理解零折射率材料的特性以及设计零折射率材料的功能器件有很好的指导意义和参考价值.