超宽带脉冲渐变式同轴到平板过渡结构研究

由于纳秒级的脉冲信号在平板结构传输中，辐射损较大，因此对于瞬态脉冲信号的传输一般采用同轴结构。超宽带脉冲信号的辐射较常采用TEM喇叭天线，由两片三角形的平面极板构成。对于应用TEM喇叭（或将其作为抛物面天线馈源）辐射高功率超宽带脉冲信号，一个重要的问题是如何将高功率脉冲信号由同轴传输线过渡到平板结构天线。     

Transmission Properties of THz Radiation Pulses through Very Deep Zero-Order Metallic Gratings

Very deep zero-order metallic grating structures are processed to study the transmission properties of THz radiation pulses. The experiments have been performed with two samples. The delay of the THz pulses and the corresponding resonantly enhanced transmission spectra through the samples are observed. To explain the extraordinary transmission we have treated the samples as Fabry-Perot resonators through resonant excitation of the coupled surface plasmon polaritons filled in the cavities between the metal slats. The experimental results are in reasonable agreement with the numerical simulation. Our results show that THz-time-domain spectroscopy may be an effective technique for studying the optical properties of various THz microstructured devices.     

二次升压的重复频率脉冲电源

介绍一种采用脉冲变压器二次升压工作方式实现高电压脉冲输出的设计电路，电路的主要特点是可以对电容负载实现快速充电，通常其充电时间可控制在几百纳秒内。由于在电路中的开关器件为氢闸流管和磁压缩装置，因此系统具有千赫兹的连续重复频率工作能力。目前，以这种方式工作的重复频率脉冲电源系统，脉冲调制过程的能量传输效率大于70％，输出脉冲电压大于600kV，连续重复频率大于100Hz.     

具有非单调功能反应和脉冲扰动的捕食系统的研究

研究捕食者具有非单调功能反应和周期脉冲扰动的捕食者一食饵系统，利用脉冲微分方程的Floquet理论和比较定理，得到了系统灭绝和持续生存的充分条件．最后，通过数值模拟阐明系统在周期脉冲扰动下的复杂性．     

2MeV注入器脉冲电子束时间分辨能谱诊断研究

 介绍了利用磁分析器和电子束产生的契伦科夫辐射光诊断直线感应加速器脉冲电子束时间分辨能谱的原理、方法及诊断系统，对中物院2MeV感应叠加型注入器的2kA强流脉冲电子束时间分辨能谱进行实验诊断，并与二极管电压进行对比分析。测得能量约2.2MeV，60ns内最大能量变化为4%。     

双预脉冲驱动X射线激光实验研究

 在“星光-Ⅱ”激光装置上进行了双预脉冲驱动类氖铬X射线激光实验，介绍了实验方法和实验结果，并对结果进行了简短讨论。由于目前“星光”装置输出能量较低，所进行的双预脉冲驱动未能显著提高X射线激光强度，改变预脉冲幅度时X射线激光强度也未有显著变化。利用MED103程序进行了模拟计算，其结果与实验结果一致。     

Generation of Ultrashort Light Bullets in Dispersive Kerr Media Using the Fourth—Order Dispersion—Dependent Spatiotemporal Instability

A new method for generation of a train of ultrashort pulses or a sequence of ultrashort light bullets is proposed. This method is based on the fourth-order dispersion-dependent spatiotemporal instability in dispersive Kerr media. The repetition-rate of the generated bullets can be made quite large by increasing the corresponding spatial modulation frequency locating in the new instability region resulted from fourth-order dispersion.     

毛细管放电X光激光装置中的预脉冲电源

 针对目前毛细管放电X 光激光装置产生的预脉冲电流幅值过大、持续时间较短的问题，提出了增加预脉冲开关抑制原有预脉冲，再外加由脉冲成形网络组成的预脉冲发生器，产生所需预脉冲的改造方案。可在主脉冲来临之前产生幅度10~50A，持续时间约17μs的方波预脉冲电流，来满足毛细管放电泵浦类氖氩X光激光实验的需要。     

Elimination of Spiral Waves and Competition between Travelling Wave Impulses and Spiral Waves

The interaction between travelling wave impulses and spiral waves is studied and the results of their competition are related to the exciting period. From the results, it is known that the formation and development of spiral waves in cardiac tissue depend on the period by which the travelling wave impulses are excited. A method is proposed to eliminate spiral waves, which is easily operated.     

Deposition of Diamond-Like carbon Films by High-Intensity Pulsed Ion Beam Ablation at Various Substrate Temperatures

Diamond-like carbon (DLC) films have been deposited on to Si substrates at substrate temperatures from 255℃ to 400O℃ by a high-intensity pulsed-ion-beam (HIPIB) ablation deposition technique. The formation of DLC is confirmed by Raman spectroscopy. According to an x-ray photoelectron spectroscopy analysis, the concentration of sp^3 carbon in the films is about 40% when the substrate temperature is below 300℃ C. With increasing substratetemperature from 25℃ to 400℃, the concentration of sp^3 carbon decreases from 43% to 8%. In other words,sp3 carbon is graphitized into sp^2 carbon when the substrate temperature is above 300℃. The results of xray diffraction and atomic force microscopy show that, with increasing the substrate temperature, the surface roughness and the friction coefficient increase, and the microhardness and the residual stress of the films decrease.