真空中铝单丝电爆炸的实验研究

开展了铝单丝在负极性电流脉冲作用下电爆炸特性的研究.利用皮秒激光探针,搭建了阴影、纹影和干涉的光学诊断平台,得到了不镀膜铝丝典型的能量沉积过程,在电压崩溃时刻其沉积能量为2.4 eV/atom.为了增加金属丝内的沉积能量,开展了相同电参数及金属丝尺寸下的镀膜铝丝电爆炸实验,其沉积能量可达到5 eV/atom,实现了在电压崩溃之前铝丝完全气化(完全气化所需能量为4 eV/atom).阴影图像展示了高密度丝核区域的膨胀过程,不镀膜铝丝平均膨胀速度为2.2 km/s,而镀膜铝丝因为沉积能量大,其膨胀速度约为不镀膜铝丝的2.3倍,高密度区域膨胀速度为5 km/s.由于阴影不能反映低密度等离子体的膨胀,开展了平行双丝实验,通过测量自发光辐射,估算了低密度等离子体的膨胀速度.利用条纹相机拍摄了不镀膜铝丝电爆炸过程中自发光区域的图像.纹影图像清晰地展示了不镀膜铝丝在电爆炸过程中形成的核冕结构,而镀膜铝丝电爆炸过程中核冕结构得到了一定程度的抑制.从干涉图像计算了相移,在轴对称假设下对相移进行阿贝尔逆变换,重构了三维的铝原子数密度分布.     

基于Aspen Plus的小型含氧煤层气液化工艺分析

针对某一典型含氧煤层气气源,构建了适用于小型液化装置的丙烷预冷氮-甲烷膨胀液化精馏工艺,并采用Aspen Plus对该流程进行建模及分析。以流程比功耗、甲烷回收率为评价指标,分别研究了制冷剂高压压力PN2和低压压力PN7对流程比功耗的影响。结果表明,在PN2为3.8MPa,P_(N7)为0.3MPa时,比功耗为0.513k Wh·Nm~3,甲烷回收率为93.42%,LNG产品纯度接近100%。结合爆炸极限计算表明,含氧煤层气在压缩、冷却、液化及节流过程中,甲烷浓度均高于爆炸上限,操作安全性较高,而精馏塔顶部甲烷浓度变化会穿越爆炸上下限区间,基于此,采用原料气低压初脱氧的方式来控制精馏塔顶部氧气含量。分析结果表明,对当粗脱氧后进入压缩机的煤层气含氧量低于2.4mol%时,流程操作安全可靠。     

微型平面复合薄膜电爆炸开关的设计和研究（英文）

开关技术是影响爆炸箔起爆系统可靠作用、微型化、低能化、集成化的关键技术。电爆炸平面开关是利用强脉冲电流使触发极金属桥箔发生电爆炸,产生高温高压等离子体,使爆炸桥区两侧的电极导通。基于微加工技术,采用Al/CuO复合薄膜材料作为触发电极,设计制造了微型平面复合薄膜电爆炸开关。采用扫描电子显微镜、差示扫描量热法和光谱谱线测温研究了触发极Al/CuO复合薄膜的形貌、反应性和电爆炸等离子体温度,通过放电电流测试研究了开关性能。结果表明,在主回路电压2000V时,开关输出电流峰值约为1938A,上升时间390ns,性能优于仅以铜薄膜为触发电极的电爆炸平面开关。     

三维无溶剂含能Ag-MOF的制备、热分解动力学及爆炸性能

Solvent molecules can significantly reduce the heat of detonation and stability of energetic metal-organic framework (EMOF) materials, and the development of solvent-free EMOFs has become an effective strategy to prepare high-energy density materials. In this study, a solvent-free EMOF, [Ag₂(DTPZ)]_n (1) (N% = 32.58%), was synthesized by reacting a high-energy ligand, 2, 3-di(1H-tetrazol-5-yl)pyrazine (H₂DTPZ), with silver ions under hydrothermal conditions, and it was structurally characterized by elemental analysis, infrared spectroscopy, X-ray diffraction, and thermal analysis. In 1, the DTPZ²⁻ ligands that adopted a highly torsional configuration bridged the Ag⁺ ions in an octadentate coordination mode to form a three-dimensional framework (ρ = 2.812 g∙cm⁻³). The large steric effect and strong coordination ability of DTPZ²⁻ effectively prevented the solvent molecules from binding with the metal centers or occupying the voids of 1. Moreover, the strong π-π stacking interactions [centroid-centroid distance = 0.34461(1) nm] between the tetrazole rings in different DTPZ²⁻ ligands provided a high thermal stability to the framework (T_e = 619.1 K, T_p = 658.7 K). Thermal analysis showed that a one-step rapid weight loss with intense heat release primarily occurred during the decomposition of 1, suggesting potential energetic characteristics. Non-isothermal thermokinetic analyses (based on the Kissinger and Ozawa-Doyle methods) were performed using differential scanning calorimetry to obtain the thermoanalysis kinetic parameters of the thermodecomposition of 1 (E_a = 272.1 kJ·mol⁻¹, E_o = 268.9 kJ·mol⁻¹; lgA =19.67 s⁻¹). The related thermodynamic parameters [enthalpy of activation (ΔH^≠ = 266.9 kJ·mol⁻¹), entropy of activation (ΔS^≠ = 125.4 J·mol⁻¹·K⁻¹), free energy of activation (ΔG^≠ = 188.3 kJ·mol⁻¹)], critical temperature of thermal explosion (T_b = 607.1 K), and self-accelerating decomposition temperature (T_SADT = 595.8 K) of the decomposition reaction were also calculated based on the decomposition peak temperature and extrapolated onset temperature when the heating rate approached zero. The results revealed that 1 featured good thermal safety, and its decomposition was a non-spontaneous entropy-driven process. The standard molar enthalpy for the formation of 1 was calculated to be (2165.99 ± 0.81) kJ·mol⁻¹ based on its constant volume combustion energy determined using a precise rotating oxygen bomb calorimeter. Detonation and safety performance tests revealed that 1 was insensitive to impact and friction, and its heat of detonation (10.15 kJ·g⁻¹) was higher than that of common ammonium nitrate explosives, such as octogen (HMX), hexogene (RDX), and 2, 4, 6-trinitrotoluene (TNT), indicating that 1 is a promising high-energy and insensitive material.     

爆炸载荷下脆性颗粒体系破碎特性的数值研究

试验发现,以球形TNT为中心爆源,球形玻璃珠构成的颗粒和球壳中发生破碎的颗粒体积分数随当量比(颗粒球壳的质量与TNT炸药的质量比)的增加呈现指数衰减规律。采用有限元与离散元耦合的连续非连续数值方法,揭示了中心炸药起爆后颗粒环壳内爆炸波的传播衰减和在环壳外界面反射后的稀疏卸载过程。由于爆炸波的短脉冲特性,颗粒内部应力场始终处于应力非均衡状态,采用应力均衡状态下颗粒破碎强度的Weibull分布会得到远高于试验测得的破碎颗粒体积分数。因此采用破坏波传播特征时间内的平均诱导应力而非瞬时诱导应力作为颗粒破碎强度的应力指标,并通过试验结果确定破坏波传播特征时间。考虑了应力传播的非均匀性对于颗粒破碎的影响,得到了平均诱导应力峰值的概率分布随比例距离的变化规律,结合修正后的颗粒破碎强度Weibull分布建立了破碎颗粒体积分数随比例距离的变化模型。     

一种水下爆炸冲击波压力调控方法

起爆位置和装药形状对水下爆炸冲击波压力有较为显著的影响,这使得利用小当量装药在局部方向形成与大当量装药一定程度等效的冲击波成为可能。为了能够在小当量装药条件下开展舰船结构及设备抗水下爆炸冲击实验,基于细长装药结构和参数优化设计,设计了一种冲击波压力幅值和持续时间可调的装药方法。首先,基于简单波理论给出了水下爆炸冲击波压力调控的原理,以及装药参数优化设计的目标函数和约束条件;然后,采用自主数值模拟软件研究了细长装药的水下爆炸能量输出规律,通过实验验证了数值模拟的置信度,研究发现起爆位置和装药形状对水下爆炸冲击波压力峰值和持续时间的影响是显著的,在炸药爆速一定的情况下,长药柱水下爆炸冲击波压力的持续时间可通过几何近似确定;最后,为了进一步考察该方法的有效性,以1000 kg TNT和100 m爆距的水下爆炸冲击波压力-时间曲线作为原型,设计了2种与该原型冲击波压力等效的装药方案,并通过数值模拟进行了验证。研究结果表明:设计的装药能够在预定的持续时间内,在装药起爆端一侧形成与原型等效的冲击波压力-时间曲线。由于没有考虑对气泡载荷的等效,因此该调控方法仅适用于中远场爆炸冲击问题。     

Fiber Bragg grating hydrophone with high sensitivity

A fiber Bragg grating （FBG） hydrophone with high sensitivity was demonstrated. This hydrophone used a rubber diaphragm and a copper hard core as the sensing element. To compensate the hydrostatic pressure, a capillary tube was fixed at the end of the hydrophone. Theoretical analysis of the acoustic pressure sensitivity was given in this letter. Experiments were carried out to test the frequency response of the hydrophone. The result shows that when the Young＇s modulus of the diaphragm is higher, a flatter frequency response will be obtained.     

Compton散射下强激光等离子体空气冲击波波前的传输特性

 根据球对称激光等离子体空气冲击波在自由空间中传输的约束条件，对多光子非线性Compton散射的强激光等离子体空气冲击波波前的传输特性进行了研究，给出了散射下空气冲击波波前的运动方程，并进行了数值模拟。结果表明：该冲击波的衰减过程不仅与爆炸源和爆炸过程的特性、释放总能量、空气的弹性有关，而且还与散射有关，散射效应使冲击波的初始半径增大，衰减过程加快，能量转移率提高；数值模拟与实验结果符合得很好。     

映照z■e~(az+bz~2)(a,b∈IR)的动力系统 (Ⅰ)爆炸区域

我们拓广了Devaney R.L.关于爆炸线段的定义,定义了系统g(a,b)(z)的爆炸区域,并确定了(a,b)一平面上两个爆炸区域,D_C~o和D_C~∞.文末我们提出了如下猜测D_C=D_C~o∪D_C~∞其中D_C是系统g(a,b)(z)的爆炸点集.     

两级螺旋型爆炸磁通量压缩发生器串联的理论计算

从电路方程出发，对柱形与锥形螺旋型爆炸磁通量压缩发生器(MFCG)的串联进行了计算。通过计算与实验的比较，确定了MFCG内部损耗系数A值；并确定了两级MFCG之间各参数值的关系。