κ玻色子q相干态的反聚束效应

研究了q变形湮没算符高次幂（αq^k,κ≥3)本征态的反聚束效应，并就κ=3的情况用数值计算方法研究了q变形参数对该效应的影响。结果表明，当q变形相干态中谐振子的强度x=|z|^2在某些区间内取值时，αq^k的本征态将呈现反聚束效应，并且这一效应明显地受到q参数的影响。当参数q取定时，随着q变形光场强度的变大，该光场的光子数涨落在经典（或量子）和量子（或经典）特性之间交替地变化。     

双面电弧焊接的传热模型

将等离子焊接(PAW)电弧和钨极氩弧焊(TIG)电弧串接,相对作用于工件的正反面形成双面电弧焊接(DSAW)系统,可以引导焊接电流沿工件厚度方向流过小孔,补偿等离子电弧穿透工件时消耗的能量,以有效地提高等离子弧的穿透能力.综合考虑影响双面电弧焊接正反面熔池几何形状的力学因素,建立了熔池表面变形的控制方程,以此为基础并采用帖体曲线坐标系建立了DSAW焊接传热的数学模型,分析了DSAW,PAW焊接传热的差异,从传热的角度解释了DSAW焊接熔深增加的原因.焊接工艺实验表明,计算结果与实测结果吻合良好. 关键词： 双面电弧焊接(DSAW) 传热模型 熔池表面变形模型     

Frequency Selectivity Behaviour in the Auditory Midbrain： Implications of Model Study

By numerical simulations on frequency dependence of the spiking threshold, i.e. on the critical amplitude of periodic stimulus, for a neuron to fire, we find that bushy cells in the cochlear nuclear exhibit frequency selec- tivity behaviour. However, the selective frequency band of a bushy cell is far away from that of the preferred spectral range in human and mammal auditory perception. The mechanism underlying this neural activity is also discussed. Further studies show that the ion channel densities have little impact on the selective frequency band of bushy cells. These findings suggest that the neuronal behaviour of frequency selectivity in bushy cells at both the single cell and population levels may be not functionally relevant to frequency discrimination. Our results may reveal a neural hint to the reconsideration on the busily cell functional role in auditory information processing of sound frequency.     

q变形对相干态的相位概率分布特性

通过推广Pegg和Barnett的相位算符和相位态到q变形的双模情况, 应用数值计算 研究了q变形对相干态的相位概率分布特性. 结果表明, q变形对相干态的相位概率分布受到相位参数、q参数和参数│ξ│的调节, 从而反映出不同的量子相干特性.     

混凝土动态劈裂拉伸试验的数值模拟

采用LS-DYNA有限元编码程序，对混凝土的动态劈裂拉伸试验进行了数值模拟，给出了混凝土试样在不同类型加载情况下应力分布之间的差异，证实了动态劈裂拉伸试验的有效性，提出了改进试验方法的若干结论．     

Deformation Morphology underneath the Vickers Indent in Bulk Metallic Glasses

Plastic deformation behaviour of Zr52.5Al10Ni10Cu15Be12.5 and Mg65Cu25Gd10 bulk metallic glasses (BMGs) is studied by using the depth-sensing nanoindentation and microindentation. The subsurface plastic deformation zone of the BMGs is investigated using the bonded interface technique. Both the BMGs exhibit the serrated flow depending on the loading rate in the loading process of indentation. Slow indentation rates promote more conspicuous serrations, and rapid indentations suppress the serrated flow. Mg-based BMG shows a much higher critical loading rate for the disappearance of the serration than that in Zr-based BMG. The significant difference in the shear band pattern in the subsurface plastic deformation zone is responsible for the different deformation behaviour between the two BMGs. Increase of the loading rate can lead to the increase of the density of shear bands. However, there is no distinct change in the character of shear bands at the loading rate of as high as1000 nm/s.     

化学与化工——化学与化工学科研究进展

在气体泄漏监测工作中选择合适的示踪剂是非常重要的。近年来，围绕示踪剂的研究开展了大量的工作，为了寻求现有示踪剂的改进，开展了全氟二甲基环丁烷示踪剂在carboxen-569分子筛上的吸附行为研究，考察了温度和采样速度对示踪剂穿透体积和安全采样体积的影响，确定了大气示踪剂样品的采集工艺参数和热解吸条件，为该示踪剂的应用奠定基础。     

加热炉内板坯粘塑性下桡变形的研究

在加热妒内，由于高温及重力作用，板坯两端的悬臂将产生下桡变形。悬臂越长，下桡将越大，导致悬臂下桡部分与出口端墙相碰，影响出料而造成事故。本文对加热炉内板坯的下桡变形进行了分析计算。首先，建立了板坯的二维非稳态导热模型并用有限差分法计算了炉内板坯随时间的温度变化；然后建立了板坯悬臂粘塑性变形模型，用有限元法计算了高温条件下由重力引起的悬臂的下桡变形。由此理论模型计算出的板坯抽出温度与悬臂端下桡量与实测结果吻合良好，说明该理论模型及模型计算方法是正确的，可用于对装钢生产进行指导。     

核结构数据库(NSDB)

基于最新的实验评价和模型计算的核结构数据, 组建了一个更新的核结构数据库(NSDB), 目前,该数据库包括稳定同位素的丰度和原子质量, 原子核基态和分离激发态的性质, 及原子核的变形、半径及其它性质等三部分的数据.     

Critical Behaviour of the One—Dimensional Ferromagnetic t—J Model

The one-dimensional super-symmetric ferromagnetic t-J model is studied via the thermal Bethe ansatz.Analytic expressions of the free energy for T→O are obtained.A new critical behaviour beyond the universal class of Luttinger Liquids is found in this system.