多媒体在二维动量实验中的应用

利用VisualBasic的多媒体功能和CCD摄像头以及气垫桌等组成的实验系统，演示了二维碰撞中的动量守恒．     

矩阵法拟定化学反应机理软件

本软件是根据Happel和Sellers提出的矩阵法编制的。用户只需输入基元反应方程式及其系数矩阵,即可得出全部动力学上有意义的反应路线。本软件不但可用于单一总反应的物系,也可用于多个总反应的物系,既适于均相反应,也适于非均相反应。它是拟定化学反应机理的有力工具。本软件用BASIC语言编写,由DOS3.3以上版本支持,可在APPLE-Ⅱ及其兼容机上运行,使用十分方便。     

加权二次有理Bézier插值曲线

在本文中,给定一组有序空间数据点列及每个数据点的切矢向量,利用加权二次有理Bézier曲线对数据点作插值曲线,使该曲线具有C1连续性,并且权因子只是对相应顶点曲线附近产生影响,同调整两个相邻的权因子可以调整这两个相邻顶点之间的曲线和它的控制多边形.     

The Analysis and Improving of the Microwave Exciter in the Lower Hybrid Wave System

When we carry out lower hybrid wave heating and current driving plasma experiment at tokamak, we need mega-watt order of microwave power. The microwave signal at frequency of 2450 MHz is generated by a microwave exciter. According to the experiment＇s demands, the microwave exciter must provide output power of 1.5～ 2. 5 W with stabilized frequency and amplitude tobe used as the klystron input. Being amplified by the klystron, the microwave signal is transmitted through the transmitting system to the antenna and is emitted into the HL-2A tokamak. So we can see that the microwave exciter＇s function is very important to the lower hybrid wave heating and current driving plasma experiment.     

薄铝埋点等离子体K线光谱半定量诊断

高温等离子体系统中存在等离子体流体力学运动演化过程、离子的离化分布演化动力学过程、高剥离态离子谱发射过程及发射芬光辐射输运过程等，而且高温等离子体系统通常是非平衡系统，所以定量研究高温等离子体系统的发射X光谱和高温等离子体对X光的吸收是一个非常复杂的问题。为了模拟和解释实验测得的激光等离子体发射光谱，提出了一种薄埋点靶：直径为φ200μm厚度为0．1μm的铝点埋在20μm厚的CH膜底衬中，表面再覆盖0．1μm厚CH膜。     

红外／雷达双传感器融合目标跟踪算法

实现雷达和红外融合跟踪的基本思路是：首先提取红外成像的目标质心并将其转换到惯性坐标系：然后用最小二乘规则对红外传感器的冗余角度数据进行压缩，以产生在时间上和雷达测量对准的伪角度测量：再通过加权平均的方法分别与雷达的方位角和俯仰角测量进行融合处理，以得到同步数据融合估计。采用了由拉格朗日算法所求得的约束极值作为权系数，使用扩展的卡尔曼滤波方法设计跟踪滤波器，将基于雷达和红外融合得到的数据用于更新滤波器的目标状态。     

Development of Vacuum Monitoring System in the HL-2A tokamak

HL-2A is the first divertor tokamak in China. The vacuum system is one of the important parts of the HL-2A tokamak, which has to be work well during the physics campaign in 2004. As the tokamak machine is separated from the operation staff during discharges, to guarantee the safe and reliable operation of the vacuum system, it is necessary to watch the vacuum system outside the machine hall with an automatic monitoring system. The paper describes the design and manufacture of the monitoring system.     

中子飞行时间测量技术

用MCNP程序和ENDF／B—VI库数据计算了Livermore的^6 Li探测器的中子探测效率，并与国外发表的^6Li玻璃的探测效率数据进行比较，结果基本一致，表明本实验室的计算方法是正确的。     

The Design for Automation of Pellet-Forming Process in HL-2A Pellet Fueling System

In the ever fusion experiments in SWIP, pellet forming process was carried out through adjusting relative devices by staff member in site, which will make every pellet-forming process slight distinction and will result in pellet difference in shape, size and intensity. In the intervals of HL-2A discharges, staff member have to go site to accomplish the pellet-forming process, this wastes human power and increase the potential danger. So it is necessary to develop a remote control system to perform the pellet-forming process. The control system needs have the features of real-time, reliability and be easy to operate and maintain.     

双脉冲电子束源实验

2MeV直线感应加速器注入器系统由电子束产生器和脉冲功率系统组成。电子束产生器包括由感应腔组成的阴极电压叠加器、阳极电压叠加器和真空二极管及束输运系统。脉冲功率系统则包含初级功率源Marx、次级功率源Blumlein线和触发系统，其作用是为感应腔提供一个具有数十纳秒平顶宽度的高压脉冲，激发感应腔在感应腔间隙上获得一个加速电场。在2MeV注入器功率系统中，4个Blumlein线的充气开关是由发散装置的输出触发信号进行导通控制的。通过控制发散输出触发信号到达Blumlein线开关的时间，即可以实现Blumlein线开关在不同时间内触发导通，使Blumlein线依据所设定的时间顺序输出激励脉冲，从而在真空二极管上获得高压脉冲串。由于功率系统采用的是182C结构，即一根Blumlein线驱动两个感应腔，因此最多可以实现四脉冲串列。