A Novel and Efficient Catalytic System for Aerobic Oxidative Coupling of 2-Naphthol Derivatives

The paper reported a novel and efficient aerobic oxidative coupling reaction of 2-naphthol derivatives catalyzed by CuCu (Ⅰ or Ⅱ)N-alkylimidazole complexes in excellent yields. The crystal structure of CuCu(Ⅱ)N-methylimidazole complex to be determined by X-Ray.     

高职物理教学中的合成与分解

高职物理教学中涉及到合成与分解的地方主要有两处：一是力的合成与分解，另一是运动的合成与分解。由于学生在初中物理和数学教学中从未学过矢量概念，而高职数学中矢量的教学又要到很迟才进行，学生学习“合成与分解”的困难很多，笔者从以下几方面进行尝试，以解决学生在学习中的难点，消除模糊认识。     

Damage and fracture evaluation of granular composite materials by digital image correlation method

This paper presents the applications of digital image correlation technique to the mesoscopic damage and fracture study of some granular based composite materials including steelfiber reinforced concrete, sandstone and crystal-polymer composite. The deformation fields of the composite materials resulted from stress localization were obtained by the correlation computation of the surface images with loading steps and thus the related damage prediction and fracture parameters were evaluated. The correlation searching could be performed either directly based on the gray levels of the digital images or from the wavelet transform (WT) coefficients of the transform spectrum. The latter was developed by the authors and showed higher resolution and sensitivity to the singularity detection. Because the displacement components came from the rough surfaces of the composite materials without any coats of gratings or fringes of optical interferometry, both surface profiles and the deformation fields of the composites were visualized which was helpful to compare each other to analyze the damage of those heterogeneous materials. The project supported by the National Natural Science Foundation of China (10125211 and 10072002), the Scientific Committee of Yunnan Province for the Program of Steel Fiber Reinforced Concrete, and the Institute of Chemical Materials, CAEP at Mianyang     

偶氮苯化合物的合成及在新体系催化光度分析中的应用

研究了催化光度法分析指示物的合成 ,探讨了在硫酸介质中铜 (Ⅱ )催化抗坏血酸和 3 甲基 4 氨基 4′ 硝基偶氮苯的还原褪色反应 ,优化了反应条件 ,建立了一种高选择性的测定痕量铜的新方法 ,方法的检出限为 4 8× 10 - 2 μg·L- 1 。用于人发样及铝合金样中铜的测定 ,结果满意。     

双振动合成仪器的设计

指出了用示波器演示双振动合成的不足，设计了BS—Ⅱ型双频调相信号仪，并给出了应用该仪器获得的部分实验图象。     

基于分层光学扫描的三维数字化测量技术

采用切削分层光扫描测量与计算机数据信息合成相结合的方法，有效地解决了具有复杂内外腔结构零件的三维数字化测量。该方法比传统三维测量速度快、自动化程度高，能同时准确测量零件内外腔表面，零件边缘测量误差可控制在CCD两个像素内。利用获取的铝合金精密小箱体三维数据，在计算机上重构了零件的三维模型，并用RP技术制造出了零件物理原形。     

KF-Al2O3催化合成2-甲基-1-苄基苯并咪唑

苯并咪唑类杂环化合物具有杀菌、消炎、抗癌、抗氧化的活性,广泛用于食品的防虫和防腐,用于动、植物病毒的防治,人体疾病和肿瘤的防治[1-3],本文用KF Al2O3作催化剂,用DMF为溶剂,利用2 甲基苯并咪唑与苄基溴反应合成2 甲基 1 苄基苯并咪唑的新型方法,考察了诸因素对产率的影响,找出了最佳的反应条件。合成路线如下:1　实验部分1 1　仪器与试剂Brurer AM 500超导核磁共振波谱仪(溶剂CDCl3);CarloErbal1106型元素分析仪,NicoletIm pact410型红外光谱仪,KBr压片,HP1100型和Finnigan FTMS 2000型质谱仪(以上均由华东理工大学分析…     

Fe-ZSM-5杂原子分子筛的合成与表征

采用静态水热法分别以正丁胺、四丙基溴化铵为模板剂合成ZSM-5分子筛及Fe-ZSM-5杂原子分子筛；利用XRD与FT-IR对其结构进行表征；考察了Mo改性后分子筛催化剂上甲烷脱氢芳构化的反应性能。结果表明，Fe部分进入了分子筛的骨架，导致分子筛的结晶度及表面酸强度的下降，使Mo／Fe-ZSM-5催化剂的反应性能较Mo／HZSM-5显著下降。     

Polystyrene—supported Benzyl Selenide：An Effcient Reagent for Highly Stereocontrolled Synthesis of Substituted Olefins

Polystryene-supported benzly selenide has been prepared.This novel reagent was treated with LDA to produce a selenium stabilized carbanion,which reacted with alkyl halide,followed by selenoxide syn-elimination,to give substituted olefins stereospecificly.     

不确定度在大学物理实验中的应用

介绍了不确定度计算的有关概念 ,并根据大学物理实验的特点 ,给出了不确定度的简化计算方法。