用频域法实现圆环形目标物的计数

研究了用频域法实现圆环形目标物计数的方法。对空域中含有圆环形目标物的二值图像，经傅里叶变换后在频域内进行滤波，再经傅里叶反变换后取一阈值进行处理，则对应于圆环形目标物即变为一个实心体，然后对实心体进行计数即可实现对圆环形目标物的计数。对该方法进行了数学描述，并分别用模拟图像和实际图像进行了实验。结果表明，该方法消除噪声的效果好，对部分封闭圆的检测同样有效，且可用于目标物有粘连的情况。该方法对圆环形目标物的尺寸相差不大的情况更为有效。     

Bifurcations of Invariant Tori and Subharmonic Solutions of Singularly Perturbed System

This paper deals with bifurcations of subharmonic solutions and invariant tori generated from limit cycles in the fast dynamics for a nonautonomous singularly perturbed system. Based on Poincare map, a series of blow-up transformations and the theory of integral manifold, the conditions for the existence of invariant tori are obtained, and the saddle-node bifurcations of subharmonic solutions are studied.     

Ce, Y-TZP陶瓷的内耗峰和介电损耗峰机制

测量了淬火前后8Ce, 0.5Y-TZP陶瓷(稳定剂Y2O3的摩尔分数为0.50%)在室温到250℃温度范围内的内耗行为,并对出现的内耗峰机理进行了研究,发现淬火前后的样品在100℃左右均出现的内耗峰与YZr‘V偶极子的再取向有关,而淬火后样品出现的高温内耗峰起源于马氏体相变.此外,本文还研究了8Ce, 0.5Y-TZP和8Ce, 0.75Y-TZP陶瓷在室温到400℃温度范围内的介电损耗,计算了介电驰豫的激活能,结果表明与内耗试验中机械驰豫的激活能一致.     

A NOVEL METHOD FOR FABRICATING COMPOSITE MOSAIC MEMBRANE WITH UNIQUE NF SELECTIVITY

A novel method of fabricating composite mosaic membranes was studied on the basis of interracial polymerization （IP） by coating a thin selective layer onto the surface of a micro-porous hollow-fiber membrane, in which, 2,5-diaminobenzene sulfonic acid was used as one monomer of the IP reaction, and a mixture of trimesoyl chloride （TMCI） and 4-（chloromethyl） benzoyl chloride as the other monomer. Through the IP reaction a thin selective layer with negatively charged groups could be first formed on the polyethersulfone （PES） support membrane. Then trimethylamine solution was introduced to modify the IP layer through a quaternization reaction. Thus the selective layer of this composite membrane contained both negatively charged and positively charged groups to perform the mosaic functionality. Characterization of the composite mosaic membranes was carried out through permeation experiments using different inorganic salts and dyes. The experimental results showed that the membranes could permeate both mono- and bi-valent inorganic salts, but reject larger organic molecules. Such a mosaic membrane is potentially useful for the separation of salts from water-soluble organics, especially in dye and textile industries.     

浅谈先进陶瓷

中国陶瓷有着漫长的发展历史,中国最早的陶器可追溯到9000年前,而瓷器也早在4000年前就已出现。如今陶瓷制品广泛应用于社会生活、科学技术的方方面面。所谓陶瓷,从广义上讲,指除有机和金属材料之外的所有其他材料,即无机非金属材料;从狭义上讲,陶瓷材料主要指多晶的无机非金属     

薄原子蒸汽膜的双光子光谱及Dicke窄化

薄原子蒸汽膜的单光子Dcike窄化吸收光谱可以拓展到双光子情形，以级联三能级系统为例,从理论上得到了亚多普勒结构的双光子吸收光谱，其线型表现出和单光子过程相似的与膜厚和探测光波长的比值(L/λ)相关的周期性.当L/λ=(2n+1)/2(膜厚为半波长的奇数倍)时，吸收谱线窄化现象明显.当L/λ=2n/2(膜厚为半波长的偶数倍)时，单光子情形的谱线窄化现象消失，而双光子情形的谱线仍表现为亚多普勒结构，尤其在异侧入射的情形下，可以获得极窄的双光子谱线结构. 这种结构来自原子与腔壁碰撞的消激发效应和双光子过程的抽运-探测机制的贡献. 关键词： 薄原子蒸汽膜 双光子光谱 Dicke窄化     

0.18μm CMOS工艺栅极氧化膜可靠性的衬底和工艺依存性

用斜坡电压法(Voltage Ramp, V-ramp)评价了0.18μm双栅极 CMOS工艺栅极氧化膜击穿电量(Charge to Breakdown, Q_bd)和击穿电压(Voltage to Breakdown, V_bd). 研究结果表明，低压器件(1.8V)的栅极氧化膜(薄氧)p型衬底MOS电容和N型衬底电容的击穿电量值相差较小，而高压器件(3.3V)栅极氧化膜(厚氧)p衬底MOS电容和n衬底MOS电容的击穿电量值相差较大，击穿电压测试值也发现与击穿电量 关键词： 薄氧 可靠性 击穿电压 击穿电量     

掺钕钆镓石榴石激光陶瓷粉体的研究

优质的纳米前驱体是生成良好透明陶瓷的关键。采用Sol-gel法制得颗粒均匀、粒度小、无团聚、分散性好的Nd:GGG激光陶瓷前驱粉体。对透明陶瓷前驱体进行测试XRD分析,与标准JCPDS卡片对比表明样品属于立方晶系,空间群Ia3d,晶格常数为:A=123.7nm。粉体的最佳烧成温度为1000℃,煅烧时间8h。SEM观察发现,样品纯度高、单分散、颗粒均匀且近似球形,符合制备透明陶瓷的粉体要求。     

共轴均匀带电薄圆盘间的相互作用力

本文利用静电场的高斯定律和环路定律巧妙地求出了均匀带电圆盘在空间任一点所产生的电场 ,进而计算出了共轴均匀带电薄圆盘之间的相互作用力