“《分析化学》-赛默飞双三元液相色谱应用专刊”征稿启事

为加强赛默飞国内客户的学术交流与合作,充分分享经验与科研成果,推动我国相关科研领域的发展,预计于2014年12月由《分析化学》杂志与赛默飞合作出版"赛默飞双三元液相色谱应用专刊"(以下简称为专刊)。本期专刊将以研究报告、研究简报、评述与进展、仪器装置与试验技术等形式开展多领域同行间的学术交流。专刊将邀请环境、食品、制药、化工等领域的专家发表利用赛默飞双三元液相色谱获得的研究成果。鼓励液相色谱仪器青年工作者和研究生踊跃交流。     

A 3-fold Interpenetrated lvt Cd(Ⅱ) Network Constructed from 4-[(3-pyridyl)methylamino]benzoate Acid

A new three-dimensional(3D) coordination polymer, [Cd(L)2H2O]n·5nH2O 1 with 4-[(3-pyridyl)methylamino]benzoate acid(HL), has been synthesized by slow evaporation solvent at room temperature, and structurally characterized by elemental analysis, IR spectrum, thermal analysis, fluorescence spectrum and single-crystal X-ray diffraction. Compound 1 crystallizes in the tetragonal system, space group I-4, with a = 20.7937(16), c = 13.515(2), V = 5843.5(11) 3, C26H34CdN4O10, Mr = 674.97, Dc = 1.534 g/cm3, μ(MoKα) = 0.808 mm-1, F(000) = 2768, Z = 8, the final R = 0.0276 and wR = 0.0691 for 5323 observed reflections(I 2σ(I)). The result of thermal analysis shows that 1 is stable under 290 ℃. Moreover, it exhibits blue photoluminescence at room temperature.     

Synthesis and Rheological Investigation ofModel Symmetric 3-Arm Star Polyethylene简

A variety of linear and 3-arm star polyethylene （PE） model polymers covering a wide range of molecular weight are synthesized by the living polymerization of butadiene and the subsequent hydrogenation. Several rheological parameters of these model linear and 3-arm star PE samples are analyzed for detecting the long chain branching （LCB） structure. It is found that the analyses based on zero shear viscosity, vGP plot and flow activation energy are very sensitive to the 3-arm star PEs. The information on the presence of LCB can be obtained with these methods even for low molecular weight samples, which can not be determined by GPC-MALLS. However the information about the LCB structure can not be obtained by the rheological methods alone.     

Synthesis and Characterization of Polyesters Based on Diethylketone Moiety

A new class of unsaturated polyesters based on diethylketone have been prepared by interfacial polymerization of 2,4-bis（4-hydroxybenzylidene）-3-pentanone（I） and 2,4-bis（4-hydroxy-3-methoxybenzylidene）-3-pentanone（II） with 4,4’-azodibenzoyl chloride and 3,3’-azodibenzoyl chloride at ambient temperature. The model compounds were synthesized by reaction of（I） and（II） with benzoyl chloride. The new monomers, model compounds and polyesters have been characterized by different spectral analyses. The polyesters have inherent viscosity of 0.55-0.80 d L/g and moderate number average molecular weight（Mn） in the range of 6150-7400 g/mol. Most of the compounds exhibited their solubility in aprotic solvents while partial solubility in various halogenated organic solvents was observed. The temperatures of 10% weight loss were high（225-330 °C） in nitrogen, indicating that these polyesters have excellent thermal stability. Doping with iodine dramatically raised the conductivity and produced brown colored semiconductive polymers with a maximum conductivity of 2.7 × 10-6 --1cm-1. Moreover, the morphological properties of selected example of polyesters were detected by SEM.     

How polydispersity of network polymers influences strain-induced crystal nucleation in a rubber

Network polymers in a rubber or a gel often contain non-uniform chain lengths. By means of dynamic Monte Carlo simulations of polymer mixtures with various compositions of two chain lengths, we investigated how the factor of polydispersity influences their strain-induced crystal nucleation. Under a high temperature and a high strain rate, the stretching of both polymers revealed that crystal nucleation is mainly accelerated by the presence of short-chain polymers; nevertheless, both polymers join together in the nucleation process. Further analysis proved that crystal nucleation is initiated from those highly stretched short segments, which are rich on the short-chain polymers.     

一种KI和H_3BO_3混合溶液中KI浓度的测定方法

本发明涉及分析测试领域,特别涉及一种KI和H3BO3混合溶液中KI浓度的测定方法。该方法包括:(1)测定待测液的电导率;(2)将H3BO3转化成络合酸;(3)滴定反应;(4)计算H3BO3的质量浓度;(5)计算KI质量浓度。该方法试剂种类少而且使用量少,所使用的试剂也容易得到,价格也不高,使操作过程更加方便快捷,还大大降低了测量的成本;同时加入了电导率的测量和函数模型拟合的计算,减少了人工的工作量,也防止了人工操作容易造成的误差,提高了测量结果的准确性。     

Perkin Elmer推出ElmTM空气质量实时监测网络

<正>珀金埃尔默不久前在上海新国际博览中心召开的第七届慕尼黑上海分析生化展上发布了最新研发的创新性空气质量实时监测网络Elm(https://elm.china.perkinelmer.com)。Elm是一种创新的空气监测网络服务,用于向社区和居民提供在线的、区域化的、直观的实时空气质量信息。一个Elm网络包含多个空气监测传感器,这些设备被放置在室外有需要获取实时空气质量信息的地方,可测量多种类型空气质量指标,包括臭氧、颗粒物(扬尘等)、挥发性有机物和二氧     

可拉伸超韧水凝胶的制备和应用

综述了可拉伸超韧水凝胶的设计原理及其在组织工程和柔性电子器件领域的应用. 通过将网络结构层次、 化学结构、 增韧机制与宏观力学性能相结合, 重点讨论了单网络水凝胶、 双网络水凝胶、 纳米复合水凝胶及其它水凝胶等可拉伸超韧水凝胶的研究进展, 并总结和展望了新思路和新方向.     

线性响应和两种态特定方法模拟AF350电子跃迁的溶剂效应

在极化连续模型框架下比较了线性响应与两种不同态特定方法计算的溶液中Alexa Fluor 350(AF350)分子激发能和光谱移动值的差异. AF350的第一激发态S0→S1电子跃迁属于π→π^*跃迁, 主要对应于最高占据分子轨道(HOMO)到最低空轨道(LUMO)的跃迁. 该分子激发态偶极矩大于基态偶极矩, 激发态时溶质溶剂相互作用比基态时更强, 随着溶剂极性增大, 会发生光谱红移的现象. 与实验值相比, 线性响应和两种态特定方法均高估了激发能, 其中以IBSF(Improta-Barone-Scalmani-Frisch)方法得到的激发能最小, 矫正的基态反应场方法(cGSRF)得到的激发能最大. 对于光谱移动值, 3种方法与实验值相比都偏小, 线性响应方法(LR)计算出的误差最大, 而IBSF方法得到的结果与实验值最吻合, 是预测溶液中AF350分子激发能和光谱移动值最准确的方法. 对比了Marcus传统理论和基于约束平衡的非平衡溶剂化理论的结果, 发现后者得到的激发能和光谱移动值更接近于实验值.     

应用极化水分子模型研究单分子层受限水的介电性质

受限条件下水的介电性质因测量极具挑战,其在诸多电化学过程与反应输运过程中如何扮演关键角色从未被定量地澄清.本工作利用平衡态分子动力学模拟和受限体系介电性质计算方法,系统性地探索了0.65 nm限域尺寸、5×10⁸ Pa限域压强、不同温度条件下单分子受限冰和受限水的介电性质.详细比较了恒定偶极矩SPC/E水分子模型和可极化的SWM4-NDP水分子模型在描述受限冰、水结构与介电性质上的优劣势,包括统计分析SWM4-NDP模型模拟的单分子层受限水和受限冰的瞬时分子偶极矩概率密度分布,计算每个模拟体系的静态结构因子、静态偶极空间关联函数、静态介电常数、体系偶极时间关联函数和德拜弛豫时间.首次发现了极化水分子模型描述的低维度受限水和受限冰的奇异分子极性变化,并观察到两种模型描述静态结构性质的效果相当,SWM4-NDP模型对于静态介电常数描述的优势会因受限条件的增强而被大幅削减.但在受限水介电极化弛豫动力学性质描述上SWM4-NDP模型明显优于SPC/E模型.我们推断SWM4-NDP模型在探索受限水结构相变动力学以及受限体系离子输运和溶剂化动力学等过程的模拟研究中是比SPC/E模型更好的选择.本工作将在进一步开展基于受限水系统储能、传感、输运的设计工作中提供一定的理论指导意义.