特异材料吸收体的透射线模型与场分析:理想的电磁波浓缩器(英文)

Arising from the proposed Transmission Line(TL) model for ERR and wire structure, a TL model for a metamaterial absorber is proposed. The S-parameters obtained by this TL model demonstrate the same shapes as the simulation. An investigation of the TL model and average absorption power densities shows that the metamaterial absorber does not simply convert the electromagnetic wave into thermal energy, but concentrate the electromagnetic wave into a small space where it is finally absorbed. This suggests that ...     

柔性基底红外波段左手材料制备及光学特性

采用平板电极化学电沉积的方法,通过调节实验参量,在柔性ITO导电薄膜基底上制备了尺度与红外波长匹配、结构单元大小不等、排列无序的银树枝状结构.通过调节聚乙二醇-20000浓度可以很好地调控银树枝状结构单元的形貌和尺寸,研究发现,在一定范围内增加电解液中的聚乙二醇-20000浓度,可在基底上形成分布较密、分枝较细、分枝级数较高的银树枝状结构单元.通过在银树枝状结构表面涂覆一定厚度的聚乙烯醇作为绝缘层,组装成了柔性"三明治"结构复合材料,测试得到样品在红外波段的多通带透射谱,平板聚焦实验进一步验证了样品的左手效应.     

电子束固化技术的现状和发展

概要介绍了国内外电子束（ＥＢ） 固化技术的现状；重点讨论了我国ＥＢ固化技术的发展方向及发展之路     

倍半氧化物晶体及其1～3μm波段激光性能研究进展

倍半氧化物具有优异的热学性能、稳定的物化性能、低的最大声子能量和强的晶体场，是理想的高功率、大能量激光基质材料。倍半氧化物具有超高熔点，因此其高质量、大尺寸的晶体制备极其困难，研究人员对此进行了长期的研究探索。近年激光技术发展对高品质倍半氧化物单晶的迫切需求促使相关晶体的生长技术取得了突破。本文在简单介绍倍半氧化物性能与结构的基础上，详细综述了Lu₂O₃、Sc₂O₃、Y₂O₃倍半氧化物晶体的生长方法及缺陷种类，系统总结了稀土离子掺杂的倍半氧化物在1～3μm波段内的激光性能，最后对其未来的研究与发展方向进行了展望。     

锂硫电池关键材料研究进展与展望

锂硫电池是一类极具发展前景的高容量储能体系.通过近10年的研究和开发,人们对这一体系的了解不断深入.虽然对其电化学过程中的复杂反应机理尚没有完整系统的理论描述,但是围绕正极材料的研究工作仍取得了很多成果,这为我们深入了解该体系的复杂性提供了诸多素材.本文回顾了过去10年间在该领域取得的成果,从锂硫电化学体系、正极材料、...     

FRACTURE ASSESSMENT OF AN INTERFACE CRACK BETWEEN TWO DISSIMILAR MAGNETOELECTROELASTIC MATERIALS UNDER HEAT FLOW AND MAGNETOELECTROMECHANICAL LOADINGS

A magnetoelectrically permeable interface crack between two semi-infinite magnetoelectroelastic planes under the action of a heat flow and remote magnetoelectromechanical loadings is considered, where the assumption of frictionless contact between two dissimilar halfplanes is adopted. Not only the solutions of the interface crack problem are presented in an explicit form, but also the general condition for the transition from a perfect thermal contact of two magnetoelectroelastic bodies to their separation is given.     

周期性点阵桁架材料力学性能分析的一种新的多尺度计算方法

论文提出一种周期性点阵桁架材料力学性能分析的新的多尺度方法.方法的主要思想是通过数值构造能反映周期性桁架材料单胞内部非均质性的多尺度基函数,从而在大尺度上求得单胞的等效刚度阵,大大减小了模型计算量.通过引入基函数的耦合附加项,以考虑多维矢量场问题不同方向问的耦合作用.数值研究表明,采用线性边界条件构造基函数有时会产生较...     

DECAY RATE OF SAINT-VENANT END EFFECTS FOR PLANE DEFORMATIONS OF PIEZOELECTRIC-PIEZOMAGNETIC SANDWICH STRUCTURES

This paper is concerned with the decay of Saint-Venant end effects for plane deformations of piezoelectric （PE）-piezomagnetic （PM） sandwich structures, where a PM layer is located between two PE layers with the same material properties or reversely. The end of the sandwich structure is subjected to a set of self-equilibrated magneto-electro-elastic loads. The upper and lower surfaces of the sandwich structure axe mechanically free, electrically open or shorted as well as magnetically open or shorted. Firstly the constitutive equations of PE mate- rials and PM materials for plane strain are given and normalized. Secondly, the simplified state space approach is employed to arrange the constitutive equations into differential equations in a matrix form. Finally, by using the transfer matrix method, the characteristic equations for eigen- values or decay rates axe derived. Based on the obtained characteristic equations, the decay rates for the PE-PM-PE and PM-PE-PM sandwich structures are calculated. The influences of the electromagnetic boundary conditions, material properties of PE layers and volume fraction on the decay rates are discussed in detail.     

中等组分网状结构局部微变对功能梯度板三维动力特性的影响

利用细观元方法根据材料实际金相图片信息进行材料参数输入,对发生局部网格变化的功能梯度板件进行三维动力特性分析,完成了材料细观结构与构件宏观响应间的跨尺度分析.细观元法在结构的常规有限元内部设置密集的细观单元来反映材料细观构造,此方法可实现材料细观结构到构件宏观响应的直接过渡分析,为具有细观结构微观变化的功能梯度板件的分析提供一种新的工具.利用细观元法对具有中等组分网状结构发生局部微变的功能梯度板进行三维动力特性分析,给出其固有频率及振型的三维分布,特别是功能梯度板应力振型的平面等值线图差异,得到较好的结果.