Tl2S: Re-Determination of Crystal Structure and Stereochemical Discussion

The crystal structure of synthetic carlinite, Tl₂S, was re-determined by single crystal and powder X-ray diffraction methods. The cell parameters obtained from Rietveld refinement are a=12.150(2) Å, c=18.190(4) Å, V=2325.5(7) ų. A single crystal data refinement proved Tl₂S crystallizing in the trigonal space group R3 with M=440.8gmol⁻¹, Z=27, R=0.076, and wR=0.145. The atomic arrangement found is that of a strongly deformed anti-CdI₂ type, but the deformation is clearly different from that given by previous workers. In the five crystallographically different STl₆ octahedra the S-Tl distances vary between 2.82 and 3.09Å, the Tl-Tl edges between 3.52 and 4.58Å. The common features of these octahedra are (i) each one with a definitely smaller vs larger Tl₃ face in trans-position, both faces parallel or sub-parallel (00.1), and (ii) each three shorter and longer S-Tl distances to the atoms of the larger and smaller Tl₃ faces, respectively. The Tl-Tl contacts between different Tl₂S sheets are on the average definitely shorter than the ones within the sheet and they can be smaller than the Tl-Tl contacts in the small Tl₃ faces of the STl₆ octahedra. The atomic arrangement indicates that the single electron pairs of the monovalent Tl atoms are not arranged all parallel to the z-axis, as one would expect for Tl₂S with an ideal anti-CdI₂ structure. The surrounding of the S atoms resembles that of one-third of the Cl atoms in yellow InCl. The absorbance of Tl₂S is very low at wave numbers approximately <9000 cm⁻¹.     

极性非质子溶剂与甲醇或1,2-二氯乙烷的汽液平衡

使用双沸点仪测定了丙酮、乙酸乙酯、对二氧六环、乙腈或三乙胺与甲醇或1,2→二氯乙烷以及二者混合物等十一组二元体系在99.3 kPa下的汽液平衡数据(T,x,p), 计算了有关体系的过量吉布斯自由能。结果表明, 六种非质子溶剂与甲醇组成的二元系GE>0; 乙腈或三乙胺与1,2-二氯乙烷组成的二元系GE>0, 而丙酮、乙酸乙酯或对二氧六环与1,2-二氯乙烷的二元混合物GE<0。从同种分子间或不同种分子间的缔合作用对上述结果进行了讨论。本文还在固定极性非质子溶剂(第三组分)物质的量浓度的条件下, 测定了非质子溶剂+1,2-二氯乙烷+甲醇三元混合物的汽液平衡数据, 考察了非质子溶剂的加入对甲醇+1,2-二氯乙烷二元系GE的影响。     

Cross-metathesis of vinyl aromatic heterocycles with 1-octene in the presence of a Schrock catalyst

Metathesis of 2-vinyl aromatic heterocycles such as furan, thiophene, pyrrole and pyridine in the presence of a molybdenum-based Schrock catalyst has been investigated from a synthetic point of view. The self-metathesis of 2-vinyl aromatic heterocycles was not successful. However, in cross-metathesis of thiophene, furan and styrene with 1-octene, the cross-metathesis product, heterodimer, was readily obtained selectively, together with only small amounts of the two corresponding self-metathesis products. The origin of the surprisingly high selectivity of heterodimer formation was elucidated through metallacyclobutane intermediate mechanism, observations of carbenes by in situ ¹H NMR, and reaction products.     

ansa-Metallocene derivatives XXXIII. 2-Dimethylamino-substituted bis-indenyl zirconium dichloride complexes with and without a dimethylsilyl bridge: syntheses, crystal structures and properties in propene polymerization catalysis

Bis(2-N,N-dimethylamino-indenyl) zirconium dichloride, (2-(CH₃)₂N-C₉H₆)₂ZrCl₂, and dimethylsilyl-bridged bis(2-N,N-dimethylamino-indenyl) zirconium dichloride, (CH₃)₂Si(2-(CH₃)₂N-C₉H₅)₂ZrCl₂, were prepared by reaction of the corresponding ligand lithium salts with ZrCl₄ in toluene. Diffractometric structure determinations reveal C₂-symmetric complex geometries for both complexes. An increased electron density at the Zr center of the dimethylamino-substituted complexes is indicated by reduction potentials which are 0.3–0.4 V more negative than those of their unsubstituted analogs. When activated with methyl aluminoxane in toluene solution, (CH₃)₂Si(2-(CH₃)₂N-C₉H₅)₂ZrCl₂ catalyzes the polymerization of propene to polymers with a microstructure comparable with that of polymers produced with other Me₂Si-bridged bis(indenyl)ZrCl₂ complexes, but with a substantially increased fraction of i-propyl end groups derived from alkyl exchange between Zr-polymer and Al---Me species.     

Preparation of Y2Ba4Cu7O15-δ Superconductor without High Oxygen Pressure

The synthesis of bulk Y₂Ba₄Cu₇O_15-δ superconductor at atmospheric oxygen pressure via solid state sintering is reported. Temperature ranging from 860 to 890 °C as well as time interval over 2 to 15 days were used to investigate the formation of the Y₂Ba₄Cu₇O_15-δ phase. A time-temperature profile characterizing the conditions for the preparation of Y₂Ba₄Cu₇O_15-δ phase suggests the optimal condition to be sintering at 890 °C for over 10 days. Detailed results of X-ray diffraction, electrical resistivity, iodometric titration and magnetization measurements are described.     

Ab initio potential energy surface and excited vibrational states for the electronic ground state of Li_2H

A 285-pomt multi-reference configuration-interaction involving single and double excitations ( MRS DCI) potential energy surface for the electronic ground state of L12H is determined by using 6-311G (2df,2pd)basis set.A Simons-Parr-Finlan polynomial expansion is used to fit the discrete surface with a x2 of 4.64×106 The equn librium geometry occurs at Rc=0.172 nm and,LiHL1=94.10°.The dissociation energy for reaction I2H(2A)→L12(1∑g)+H(2S) is 243.910 kJ/mol,and that for reaction L12H(2A')→HL1(1∑) + L1(2S) is 106.445 kl/mol The inversion barrier height is 50.388 kj/mol.The vibrational energy levels are calculated using the discrete variable representation (DVR) method.     

CrO3.CH3NH2.HCl／Al2O3的制备及其对苯偶姻体系的氧化反应

ＣｒＯ３·ＣＨ３ＮＨ２·ＨＣｌ／Ａｌ２Ｏ３的制备及其对苯偶姻体系的氧化反应张贵生＊石启增陈密峰蔡昆（河南师范大学化学系新乡４５３００２）关键词ＣｒＯ３·ＣＨ３ＮＨ２·ＨＣｌ／Ａｌ２Ｏ３，苯偶姻，苯偶酰，氧化１９９６－０８－１８收稿，１９９６－１１－０...     

混合高序铜法立体选择性合成（±）—EpilitsenolideC2

混合高序铜法立体选择性合成（±）┐ＥｐｉｌｉｔｓｅｎｏｌｉｄｅＣ２陈祖兴李焰＊黄精美黄锦霞徐章煌（湖北大学化学系武汉４３００６２）关键词烷叉基二氢羟基甲基（３Ｈ）呋喃酮，混合高序铜，立体选择性反应１９９６－０８－２８收稿，１９９７－０５－０６修回湖北...     

Crystal structure of dicyclohexano-18-crown-6 potassium 2-nitrophenoxide

The first crystal structure of a potassium cation complex with dicyclohexano-18-crown-6 is reported. The potassium 2-nitrophenoxide complex ofsyn-cis-syn dicyclohexano-18-crown-6 crystallizes in the triclinic space group P with cell constantsa=8.604(2),b=10.772(4),C=16.123(5)Å, =73.86(3)°,=77.61(3)°, =82.68(3)° andZ=2 forD _c =1.31 g cm^–3. Least-squares refinement based on 2742 observed reflections led to a final conventionalR value of 0.040. Dicyclohexano-18-crown-6 has the shape of a saddle with the potassium cation sitting at the saddlepoint. The structure of the 2-nitrophenoxide anion is dominanted by the quinoid resonance contributor. Because the complex is devoid of significant intercomplex interactions, it is a prototypical 1:1:1 complex. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82043 (26 pages).Now Mrs. K. M. Balo.     

Theoretical studies on the conformation of saccharides

Conformations of 2-methoxytetrahydropyran as a model for the six-membered ring in aldopyranosides have been calculated by the PCILO method using the algorithm of the conjugated gradient to optimize the geometry. The calculated geometry of the fourteen basic forms of 2-methoxytetrahydropyran was found to be in agreement with the available data obtained by X-ray diffraction of pyranosides. The results indicate differences in the geometry of 2-methoxytetrahydropyran resulting from the change of the axial vs. equatorial position of the methoxyl group. These changes are particularly meaningful in the values of bond angles and they are in agreement with the anomeric and exoanomeric effects. The experimentally found differences in the energies of an axial (⁴ C ₁) and equatorial (¹ C ₄) conformer, G = 2.9–3.7 kJ/mol, and the dipole moment, = 1.20 ± 0.05 D (1D = 3.33 10^–30mAs) agree well with the calculated values E = 3.18 kJ/mol and <> = 1.18 D which, in turn, suggest that the axial conformer is preferred over the equatorial one by a ratio a:e = 78:22.