Density and Speed of Sound for Binary Mixtures of a Cyclic Ether with a Butanol Isomer

Densities and speeds of sound of the binary mixtures 1,3-dioxolane + 1-butanol, 1,3-dioxolane + 2-butanol, 1,4-dioxane + 1-butanol, and 1,4-dioxane + 2-butanol have been measured at 25 and 40°C. The excess molar volumes and excess isentropic compressibility coefficients were calculated from experimental data and fitted to a Redlich–Kister polynomial function. Results were analyzed in terms of molecular interactions and compared with literature data.     

Unusual volumetric and hydration behavior of the catanionic system sodium undecenoate: sodecyltrimethylammonium bromide

Following the studies on the effect of double bonds in the surfactant hydrophobic tail on the formation of mixed surfactant aggregates, we studied the viscosity and density of the system Sodium 10-undecenoate (SUD)–decyltrimethylammonium bromide (DTAB)–water. We found that the partial molar volume (pmv) and intrinsic viscosity of both, micellised and unmicellised mixtures, are non-ideal, dependent on the mixture composition and related to structural changes in micelles. These phenomena are caused by the presence of the double bond at the distal extreme of the SUD molecule, which has some affinity with water by formation of hydrogen bonds. In particular, as far as we know, this is the first report on non-ideal behavior of the pmv in mixed micelles.     

Density of supercritical CO_2-tetrahydrofuran binary mixture and the partial molar volume of the cosolvent

The densities of supercritical CO2-tetrahydrofuran (cosolvent) binary mixture weremeasured at temperatures in range of 308.15 to 323.15 K and at pressure up to 16.5 MPa.The concentrations of tetrahydrofuran were from 0 to 0.57 mol/L.The partial molar volume of tetrahydrofuran was calculated based on the relationship between the density of the mixture and the concentration of the cosolvent.It is observed that the partial molar volume of the cosolvent is negative and the absolute value decreases with increasing pressure and the concentration of the cosolvent.     

Acoustic absorption in aqueous potassium phosphate

Measurements of acoustic absorption and velocity as a function of frequency and concentration in KH₂PO₄–K₂HPO₄ buffers at 4°C and pH 5-7 are reported. The dependence of the observed acoustic relaxation parameters on concentration is consistent with that to be expected from perturbation of a monomer-dimer equilibrium with an equilibrium constant [for 2H₂PO ₄ ^– (H₂PO₄)₂ ^2–] of 0.21 M^–1, a bimolecular rate constant of 5×10⁸ M^–1-sec^–1 and a standard volume change of –5 cm³ mole. The equilibrium constant for H₂PO ₄ ^– + HPO₄ ^2–H₃(PO₄)₂ ^3– is estimated to be 0.7 M^–1.     

自由体积与亲水性对环氧涂层防护性能的影响

报道了涂层聚合物自由体积和亲水性对涂层腐蚀防护性能影响的初步研究结果.实验表明,相对于自由体积,树脂的亲水性是决定树脂吸水率的更主要因素.低亲水性涂层腐蚀防护性能的提高主要源自到达涂层/金属界面的水量的显著降低.但由于采用活性酯固化的环氧树脂涂层中水通道的尺寸相对较大,水合离子扩散较容易,因此该类涂层覆盖下的金属基体被润湿部分的腐蚀趋势反而较一般涂层为大.     

CsxH3-xPW12O40的孔结构

Ｎ２静态吸附容量法的测定结果表明，磷钨酸铯盐（ＣｓｘＨ３－ｘＰＷ１２Ｏ４０）的孔窝和孔分布与ｘ值的大小相关。ｘ〈１．５的ＣｓｘＨ３－ｘＰＷ１２Ｏ４０孔容相近，孔分布近似；当ｘ〉１．５时，ＣｓｘＨ３－ｘＰＷ１２Ｏ４０的孔主要是孔径小于１０ｎｍ的中孔和微孔，平均孔径及孔容随ｘ的增加而增大。ＳＥＭ和ＴＥＭ的观测结果表明，ＣｓｘＨ３－ｘＰＷ１２Ｏ４０的孔是微细粒子堆积留下的空隙孔，可能不存在晶内孔。     

Molar volumes and ion pairing of lithium halides in alcohols

The concentration dependence of the apparent molar volumes of lithium halides (and electrolytes in general) in alcohols (and solvents permitting association in general) is, in the first instance, due to changes in the degree of association and to the inherent difference between the apparent molar volumes of the ions and of the ion pairs. Previous publications on the molar volumes of electrolytes in organic solvents, disregarding altogether ion pairing, appear to be incorrect. Data from the literature for lithium chloride and lithium bromide in normal primary alcohols and several branched alcohols from C₁ to C₈ and data from our laboratory for lithium halides in 1-hexanol and 2-ethyl-1-hexanol served for the determination of φ _V and φ _E . Electrical and structural contributions to the values of these functions for the ions and for the ion pairs are discussed.     

A practical approach to transferring linear gradient elution methods

Attempts to theoretically address the problems involved in transferring linear gradient elution methods have been somewhat ad hoc due to the simplifying assumptions usually made in conventional gradient elution theory. Until now, all equations based on the k* parameter of linear gradient elution theory used as the basis for predicting the separation selectivity have not explicitly included the effect of the dwell volume (VD). Using an exact equation for predicting k*, that is, one which fully accounts in an a priori fashion for VD, we find a set of simple yet exact equations which unequivocally must be satisfied to transfer an optimized linear gradient elution method from one system (column or instrument or both) to another. These relationships absolutely mandate that a change in the instrument dwell volume requires a proportional change in the column volume; in turn, a change in the column volume requires a proportional change in the flow rate and/or gradient time to maintain a constant gradient steepness. Although we are not the first to suggest these guidelines, this work provides a complete theoretical foundation for these exact guidelines for the maintenance of gradient selectivity for the case of transferring a linear gradient elution method between different columns packed with the same particles and/or between different instruments.     

Heat capacity of alcohols in aqueous solutions in the temperature range from 5 to 125°C

Using a precise technique of scanning microcalorimetry the heat capacity differences between water and dilute aqueous solutions of ethanol, n-propanol, n-butanol and n-pentanol were measured from 5 to 125°C and the partial molar heat capacities of these substances in water were determined. It was found that the heat capacity increment for alcohol disolved in water is proportional to the number of the-CH ₂ ^– groups and decrease with a temperature increase. The heat capacity increment of hydration of non-polar groups is shown to be positive and large at room temperature and decreases in magnitude as the temperature increases. In contrast, the heat capacity increment of hydration of polar groups is negative at room tempreature and increases as the temperature increases. From the temperature dependence of the heat capacity increment one can assume that the water molecules solvated by the non-polar groups of the alcohols behave in a non-cooperative manner.     

Volume and compressibility changes of complex formation between 18-Crown-6 and NaCl,KCl, and CsCl in water

The apparent molal volumes and compressibilities of NaCl, KCl, and CsCl in mixtures of 18-Crown-6 and water have been calculated from density and speed-of-sound measurements at 25°C. The partial molal volumes and compressibilities of the salts when all cations have formed complexes with 18-Crown-6 molecules have been evaluated. The sign and magnitude of the volume and compressibility changes of complex formation strongly suggest that the charge of the cation becomes very effectively screened by the crown ether.