总延误问题顺时安排法的性能比

给定一组工件的加工时间与工期，要求确定这些工件在一台机器上的加．工排列，使相应的总延误达到最小，这就是总延误问题．该问题在近年已被证明是NP困难的．由Wilkermn和Irwin（1971），林勋（1983）等所研究的顺时安排法能得到相邻交换意义下的局部解．在本文中，我们进一步证明该算法能得到前移邻域意义下的局部解，并确定了该算法的性能比．     

Photoelastic stress freezing analysis of total shoulder replacement systems

Photoelastic stress freezing analyses in the orthopaedic literature have, in the past, been limited to studies where bone-on-bone, bone-on-metal or ultra-high molecular weight polyethylene (UHMWPE)-on-metal constructs are modeled. In these cases photoelastic plastics are used to simulate either bone or UHMWPE as it interacts with a metal implant. In joints such as the shoulder, a UHMWPE component is often cemented directly into the scapula's glenoid concavity using polymethylmethacrylate (PMMA). While a photoelastic material can be used to simulate bone with proper load scaling, UHMWPE and PMMA have very different mechanical properties at elevated stress freezing temperatures as compared within vivo body temperature. In this study, materials were identified such that proper scaling of elastic properties at elevated temperatures was utilized to simulate the metal-UHMWPE-PMMA-bone construct. Stresses on orthogonal planes throughout the glenoid were compared for two different UHMWPE component anchoring geometries (keeled and pegged). High stresses were found at the neck of the glenoid and also at the component-bone interface beneath simulated PMMA inclusions.     

带有边集限制的最均匀支撑树问题

本在无向网络中，建立了带有边集限制的最均匀支撑树问题的网络模型．中首先解决最均匀支撑树问题，并给出求无向网络中最均匀支撑树的多项式时间算法；然后，给出了求无向网络中带有边集限制的最小树多项式时间算法；最后，在已解决的两个问题的基础上解决了带有边集限制的最均匀支撑树问题．     

具多偏差变元的n-维p-Laplacian方程周期解的存在性

研究了一类具多偏差变元的n-维p-Laplacian方程周期解的存在性,利用迭合度理论得到了存在周期解的新条件.     

全变差有界函数列的一致(R)可积性

给出了一致有界单调函数列一致可积性定理 ,由此得出全变差序列有界的收敛函数列的一致可积性 .说明了该结论可判断一些非一致收敛函数列的逐项积分性质 .     

图中相互独立的4圈和含4个点的路

设k是一个正整数，G是一个顶点数为|G|=4k的图. 假设σ\-2(G)≥4k-1, 则G有一个支撑子图含k-1个4圈和一条顶点数为4的路，使得所有这些圈和路都是相互独立的. 设G=(V\-1,V \-2;E)是一个二分图使得|V\-1|=|V\-2|=2k. 如果对G中每一对满足x∈V\-1和y∈V\-2的不 相邻的顶点x和y 都有d(x)+d(y)≥2k+1, 则G包含k-1个相互独立的4圈和一条顶点数为4的路，使得所有这些圈和路都是相互独立的，并且此度条件是最好的.     

Positive periodic solution of two-species ratio-dependent predator–prey system with time delay in two-patch environment

In this paper, we are concerned with the existence of positive periodic solution to a class of two-species ratio-dependent predator–prey diffusion model with time delay. By using the continuation theorem of coincidence degree theory, we transform this problem into a problem of calculating the topological degree of a continuous mapping, and then some sufficient conditions of the existence of positive periodic solution is established for the system.     

Qualitative Theory and Identification of Dynamic System with One Degree of Freedom

Dynamic systems described by nonlinear differential equations of the second order are studied. It is assumed that certain preliminary information on the dissipative or elastic characteristics of systems is known. A new approach is demonstrated to obtaining full information on unknown or partially known characteristics of a system from measurements of not only displacements but also velocities and accelerations __________ Published in Prikladnaya Mekhanika, Vol. 41, No. 6, pp. 139–143, June 2005.     

激发对相干态的等阶Y压缩效应

用数值计算法研究了激发对相干态|ζ;m〉＝a^+mb^+m|ζ〉的等阶Y压缩效应.结果表明:对于态a^+mb^+m|ζ〉,光场存在着等阶K(＝2,3,4,5,…)次方Y压缩效应,但是随着场模上光子增加数m的增大,等阶K次方Y压缩效应减弱.     

Experimental Evaluation of Strain Shielding in Distal Femur in Revision TKA

Theoretical concerns about the use of cemented and press-fit stems in revision total knee arthroplasty (TKA) include stress shielding with adverse effects on prosthesis fixation. Radiological studies have showed distal femoral bone resorption after revision TKA. The revision with use of stems can place abnormal stresses. These stresses can promote the effect of bone stress shielding and may contribute to bone loss. Experimental quantification of strain shielding in the distal synthetic femur following TKA is the main purpose of the present study. Three different constructs of TKA were assessed. The first construct included a stemless femoral component. The other two included a press-fit and a cemented femoral stem. Cortical bone strains were measured experimentally with tri-axial strain gauges in synthetic femurs before and after in-vitro knee surgery. The difference between principal strains of implanted and intact femur was calculated for each strain gauge position. This study indicates that the use of stems in distal femur changes the distribution and magnitude of bone strains. The press-fit stem provoked relevant bone area (stem length) subjected to strain shielding and also originated the highest reduction of strains in the distal region, which can potentially induce bone resorption. The stemless implanted femur produced minor bone strain changes relatively to the intact femur. The use of distal femur stems increases initial stability in the bone, but the observed reduction of strains in this region, relative to the intact femur, provokes strain shielding that can induce bone resorption and may compromise the long term implant stability.