Hamilton等参元与智能叠层板的半解析法

根据压电材料修正后的Hellinger-Reissner(H-R)变分原理,建立了各向异性压电材料4节点Hamilton等参元的一般形式．为智能叠层板自由振动问题和带有压电块的叠层悬臂梁的瞬态响应等问题提出了一种新的半解析法．数学模型的基本步骤:将压电层和主体层看成独立的三维体,在平面内离散各层,分别建立各层的方程;根据主体层和压电层在连接界面上广义应力和广义位移的连续条件,联立主体层和压电层的方程得到全结构的控制方程．等参元不限制智能板侧面的几何边界形状、板的厚度和层数,有广泛的应用领域．     

A Simple Closed-Loop Active Control of Electrodynamic Shakers by Acceleration Power Spectral Density for Environmental Vibration Tests

This work presents the main results of a simple closed-loop active control for an electrodynamic shaker in order to generate acceleration Power Spectral Densities (PSD) according to prescribed Standards used in environmental vibration tests. The main idea is to start generating acceleration pseudo-signals obeying the prescribed Power Spectral Density and then to acquire acceleration data from the electrodynamic shaker’s table behaviour. So the Power Spectral Density of the acquired acceleration is computed and compared with the required PSD and then the time-varying pseudo-acceleration is updated to reflect this corrected PSD. It was noticed that for piecewise narrow bands frequencies, the electrodynamic shaker acceleration behaves near linearly, both in frequency and voltage, for the input signals. A code in AgilentVee 7.5 software to acquire, send and process signals for the active control in a closed-loop scheme was developed. The used A/D D/A hardware was a single PC sound card with specific characteristics. The control could be accomplished sending and acquiring at the same time with a range of input/output of ±1.5 V with 16 bits of resolution, at 48 kHz and assistance of an external sound amplifier.     

智能板模态传感与控制的数值分析

智能结构技术对空间大型柔性结构 振动控制问题具有重要意义,采用独立模态空间控制技术对压电智能板进行主动振动控制是一种常用方法,以前对这一问题的研究仅限于解析的方法,本文采用有限单元法,设计了新的压电模态传感器与致动器,该方法能够适用于形状及边界条件较为复杂的智能板,算例分析证明了该方法的正确性。     

Fabrication of thermo-responsive polymer nanocomposites for smart window applications

Abstract

Thermo-responsive polymers have attracted much attention in recent years because they can provide a variety of applications for smart devices, but the lack of sufficient mechanical properties and late response rate of the polymers limit their applications. In the current work, we fabricated polymer nanocomposites made from poly(vinyl methyl ether) and nanofillers with photothermal conversion property such as graphene oxide, antimony tin oxide nanoparticles, and silver nanoplates. The prepared nanocomposites showed rapidly reversible and reliable transparent-opaque transitions during the repeated heating and cooling processes, suggesting that they can be applied to smart window applications.     

基于彩色扫描仪的图像光谱重构

针对彩色扫描仪的特点,采用主元分析法(PCA)和反向传播(BP)人工神经网络(ANN)相结合的方法对图像光谱重构进行研究。选择IT8.7/2标准色卡作为训练样本,将该色卡中的另一组色靶作为检验样本以讨论不同网络结构以及不同主元数和训练样本数对光谱重构的影响,再以自然色系统(NCS)色卡为检验样本来分析不同种类的训练和检验样本与光谱重构性能的关系。实验结果表明,采用3-14-6网络结构和6个主元数是最佳选择,训练样本和扫描目标之间的一致性是基于彩色扫描仪图像光谱重构的关键所在。     

Stimuli-Responsive Particle-Based Amphiphiles as Active Colloids Prepared by Anisotropic Click Chemistry

Amphiphiles alter the energy of surfaces, but the extent of this feature is typically constant. Smart systems with amphiphilicity as a function of an external, physical trigger are desirable. As a trigger, the exposure to a magnetic field, in particular, is attractive because it is not shielded in water. Amphiphiles like surfactants are well known, but the magnetic response of molecules is typically weak. Vice-versa, magnetic particles with strong response to magnetic triggers are fully established in nanoscience, but they are not amphiphilic. In this work colloids with Janus architecture and ultra-small dimensions (25 nm) have been prepared by spatial control over the thiol-yne click modification of organosilica-magnetite core–shell nanoparticles. The amphiphilic properties of these anisotropically modified particles are proven. Finally, a pronounced and reversible change in interfacial stabilization results from the application of a weak (<1 T) magnetic field.     

Wireless Coupling of Conducting Polymer Actuators with Light Emission

Combining the actuation of conducting polymers with additional functionalities is an interesting fundamental scientific challenge and increases their application potential. Herein we demonstrate the possibility of direct integration of a miniaturized light emitting diode (LED) in a polypyrrole (PPy) matrix in order to achieve simultaneous wireless actuation and light emission. A light emitting diode is used as a part of an electroactive surface on which electrochemical polymerization allows direct incorporation of the electronic device into the polymer. The resulting free-standing polymer/LED hybrid can be addressed by bipolar electrochemistry to trigger simultaneously oxidation and reduction reactions at its opposite extremities, leading to a controlled deformation and an electron flow through the integrated LED. Such a dual response in the form of actuation and light emission opens up interesting perspectives in the field of microrobotics.     

智能剥离——有竞争力的SOI制备新技术

ＳＯＩ（Ｓｉｌｉｃｏｎ－ｏｎ－Ｉｎｓｕｌａｔｏｒ）技术被认为是２１世纪的硅集成电路技术，近年来，国际上出现了一种引人注目的ＳＯＩ制备新技术－智能剥离（Ｓｍａｒｔｃｕｔ）技术，它的出现为解决ＳＯＩ技术中质量与价格的矛盾带来了新的希望，将会有力地堆动ＳＯＩ技术的进一步发展，文章简要回顾了目前存在的几种ＳＯＩ制备技术，并结合我们的工作重点介绍了智能剥离这种有竞争力的ＳＯＩ制备新技术。     

Low cost telemetry with PC sound card for chemical analysis applications

This work describes the development of a telemetric system in conjunction with a computer sound card for recording of signals. For signal transmission, a transmission wireless microphone was utilized, making the telemeter compatible with the sound card normally equipped inside a personal computer. The developed telemeter is a low-cost apparatus capable of remote monitoring. With the sampling rate of 10 Hz, 100% accuracy was obtained up to a distance of 30 m. The precision was good (%RSD = 0.03-0.09), with relatively low noise. The effective signal range was from 0 to 2 V, with approximately 1100 working steps (greater than 10 bit A/D). The telemetric system was shown to be suitable for wireless recording of outputs from spectrophotometer and pH meter. Potential applications in chemical analysis were demonstrated.     

A comparative molecular field analysis of cytochrome P450 2A5 and 2A6 inhibitors

Structure-activity relationships of 23 P450 2A5 and 2A6 inhibitors were analysed using the CoMFA [1] and GOLPE/GRID with smart region definition (SRD) [2]. The predictive power of the resulting models was validated using five compounds not belonging to the model set. All models have high internal and external predictive power and resulting 3D-QSAR models are supporting each other. Both Sybyl and GOLPE highlight properties near lactone moiety to be important for 2A5 and 2A6 inhibition. Another important feature for pIC₅₀ was the size of the substituent in the 7-positon of coumarin. The models suggest that the 2A5 binding site is larger that that of 2A6 due to larger steric regions in the CoMFA coefficient maps and corresponding GOLPE maps. In addition, the maps reveal that 2A6 disfavours negative charge near the lactone moiety of coumarin.