Determination of Utratrace Silver Using Surfactant As Sensitizer by Catalytic Near Field Laser Thermal Lens Spectrometry

Thermal lens spectrometry (TLS) is an excellent tool for trace analysis1. TLS allows the detection of absorbances of 10-7～10-8, concentration of ≈ 10-11 mol稬-1 and the analysis of 10-15 L volumes with ≈10-2 absorbing molecules2. Kinetic analysis is playing an increasingly important part in modern analytical chemistry. Therefore, TLS shows much promise in combination with kinetic analysis. However, there are few data on TLS applications in kinetic analysis method so far3～4. A ne…     

Conformation and internal mobility of 5H-dibenzo[a,d]cycloheptene derivatives in solution. Conformational analysis of highly flexible structures,part II

Summary The conformational possibilities of 5-(3-N,N-dimethylaminopropyl)-5H-dibenzo[a,d]cycloheptene (1), 5-(3-N,N-dimethylaminopropylidene)-10,11-dihydro-5H-dibenzo[a,d]cycloheptene (2), and 5-(3-N,N-dimethylaminopropyl)-10,11-dihydro-5H-dibenzo[a,d]cycloheptene (3) are analysed using empirical force field methods. Minimum energy conformations, interconversion pathways, interconversion graphs and interconversion energies are examined in view of the analysis of conformer equilibria of1,2, or3 in solution. In addition, some basic requirements of the analysis of fast interconverting conformers using the lanthanide induced shift method are discussed.

---

Konformation und interne Beweglichkeit von 5H-Dibenzo[a,d]cyclohepten Derivaten in Lösung. Konformationsanalyse hochflexibler Strukturen, Teil 2

Zusammenfassung Die konformativen Möglichkeiten von 5-(3-N,N-dimethylaminopropyl)-5H-dibenzo[a,d]cyclohepten (1), 5-(3-N,N-dimethylaminopropylidene)-10,11-dihydro-5H-dibenzo[a,d]cyclohepten (2) und 5-(3-N,N-dimethylaminopropyl)-10,11-dihydro-5H-dibenzo[a,d]cyclohepten (3) wurden mit Hilfe empirischer Kraftfeldmethoden analysiert. Jene Konformationen, die einem energetischen Minimum entsprechen, sowie Interkonversionswege, Interkonversionsgraphen und Interkonversionsenergien wurden in Hinblick auf die Analyse der Konformerengleichgewichte von1,2 oder3 in Lösung untersucht. Weiters werden noch einige grundlegende Voraussetzungen für die Analyse von sich schnell ineinander umwandelnden Konformeren mittels der Lanthaniden-induzierten Verschiebungsmethode besprochen.

     

胶束介质在动力学分析中的应用

评述了胶束介质在动力学分析测定中的作用和应用状况，讨论了胶束催化的动力学特征，胶束对反应物理化学性质的修饰及其在动力学多组份测定和酶催化动力学分析中的应用。     

Chemistry of polyfunctional molecules-123. Reactions of BiBr3, SbI3 and AsI3 with LiN(PPh2)2; X-ray structure of a cyclophosphazene salt containing arsenic(I)

BiBr₃ or SbI₃ react at 20°C with LiN(PPh₂)₂ (1) to give elementary Bi or Sb and the P---P coupled phosphazene ligand Ph₂P---N=PPh₂---PPh₂=N---PPh₂ (2). The reaction of AsI₃ with 1 at room temperature formed yellow needles of the eight-membered heterocycle (3), whereas AsI₃ interacted at 80°C with 1 in the molar ratio of 1:3 to give elementary arsenic and 2. Treatment of AsI₃ and 1 at 20°C in a 1:2 stoichiometry yielded the seven-membered, cyclic arsenium(I) salt

Full-size image

I·4THF (5·4THF), which was characterized by elemental analysis, conductivity, mass, IR and NMR spectroscopy and single-crystal X-ray structural analysis.     

二维卷积在动力学分析中的应用

本文用计算机模拟和二维卷积研究了稀土与间乙酰基偶氮氯膦的显色反应，选择不同的模型参数可描述这类反应的细节，二维卷积则增强对叠合二维谱的分辨。     

Determination of dissolved manganese in natural waters by differential pulse cathodic stripping voltammetry

A procedure based on differential pulse cathodic stripping voltammetry on the graphite electrode is described for the determination of dissolved manganese in natural waters buffered at pH about 6.5 with acetate solution. In order to avoid interference of iron(II) the addition of fluoride is used. The limit of detection is 3 g/l for a deposition time of 6 min. Acidification and UV-irradiation are recommended for samples containing dissolved organic matter. Results of manganese determination in table mineral waters are reported and the possibility of manganese speciation is discussed.     

Interaction of aminoazoles with Meldrum’s acid and dialkyl ketones or cyclohexanone

Interaction of 3-amino-5-methylpyrazole, 3-amino-5-methylthio-, and 3,5-diamino-1,2,4-triazole with Meldrum’s acid, acetone, ethyl methyl ketone, and cyclohexanone leads to alkyl-substituted pyrazolo[3,4-b]pyridin-6-ones and 1,2,4-triazolo[1,5-a]pyrimidin-7-ones respectively. The structure of 5,5-dimethyl-2-methylthio-4,5,6,7-tetrahydro-1,2,4-triazolo[1,5-a]pyrimidin-7-one was demonstrated by an X-ray structural investigation. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, pp. 595–601, April, 2007.     

多维气相色谱法提高丙烯腈色谱分析速度的方法

采用多维气相色谱法,既可提高丙烯醛、丙酮、乙腈、丙烯腈相邻两组分的分离度,又可提高分析速度。按GDX-502与402的体积比为85∶15比例混装长4.5m、内径3mm的色谱柱;氢气作为载气,流速为65mL/min;柱箱初温140℃保持15min,以15℃/min的速率升至180℃保持12min。丙烯腈样品中7种组分即可全部出峰,总分析时间为30min,比原国标推荐的方法缩短了近50min。     

Study of gas-liquid partitioning of alkane solutes in several organic solvents by using principal component analysis and linear solvation energy relationships

Principal component analysis (PCA) was used to extract the number of factors which can describe the 737 gas-liquid partition coefficients of five linear, four branched, and two cyclic alkanes in 67 common solvents. Based on the reconstruction of partition coefficient data matrix, we concluded that the experimental dataset could readily be reduced to two relevant factors. Using only these two factors, there were no errors larger than 3%, 7 cases had errors larger than 2%, and in 34 cases, errors were between 1 and 2%. n-Hexane and ethylcyclohexane were chosen as the test factors, and all other partition coefficients were expressed in terms of these two test factors. Prediction of the logarithmic partition coefficient of these alkanes in seven chemically different solvents, which were originally excluded from the data matrix, was excellent: the root mean square error was 0.064, only in 11 cases the errors were larger than 1%, and only 3 had errors larger than 4%.Linear solvation energy relationships (LSERs) using both theoretical and empirical solvent parameters were used to explain the molecular interactions responsible for partition. Several combinations of parameters were tried but the standard deviations were not less than 0.31. This could be attributed to the model itself, imprecisions in the data matrix or in some of the LSER parameters. Solvent cohesive parameters and surface tension in combination with polarity-polarizability or dispersion parameters perform the best.Finally, the two principal component factors were rotated onto the most relevant physicochemical parameters that control the gas-liquid partitioning phenomena.     

The application of the OTA of kerogen to the evaluation of the rockmass heating

Oxyreactive thermal analysis (OTA) carried out in the conditions of full access of oxygen to each reacting particle of the sample investigated is a suitable method for the determination of important properties of the organic matter dispersed in the rocks. Its results may be easily evaluated to the form of values to be used in a clear diversification and classification system of organic matter/kerogen, as well as to the evaluation of its transformation process in a rockmass. The OTA also enables the distinguishing of the transformation stages and the investigation of the results of the gaseous products liberation from organic matter and kerogen. The OTA method may be applied as a complementary one for the Rock Eval analysis and be used for the organic geochemical and bituminological studies for geological bitumen prospecting.This revised version was published online in November 2005 with corrections to the Cover Date.