Optimal production control of a dynamic two-product manufacturing system with setup costs and setup times

This paper deals with the optimal control of a one-machine two-product manufacturing system with setup changes, operating in a continuous time dynamic environment. The system is deterministic. When production is switched from one product to the other, a known constant setup time and a setup cost are incurred. Each product has specified constant processing time and constant demand rate, as well as an infinite supply of raw material. The problem is formulated as a feedback control problem. The objective is to minimize the total backlog, inventory and setup costs incurred over a finite horizon. The optimal solution provides the optimal production rate and setup switching epochs as a function of the state of the system (backlog and inventory levels). For the steady state, the optimal cyclic schedule is determined. To solve the transient case, the system's state space is partitioned into mutually exclusive regions such that with each region, the optimal control policy is determined analytically.     

抽样调查中最佳测量次数的确定

现场抽样调查中，由于测量误差的存在，使得所测变量实测值的方差增大，通过增加每个体的测量次数可以控制测量误差，但这样每个体调查费用增大。本文对测量信度Ｒ，每个体测量次数ｍ与相应所需的样本含量ｎｍ、调查费用Ｔｎ的关系进行了探讨，并介绍了如何根据Ｒ，及每个体测量费用占其总费用构成比Ｃ，确定最佳测量次数ｍ值，以达到最佳控制调查费用的目的，这对我们在大型现场调查中进行经济效益分析具有重大的理论指导意义。     

Optimal control problems with applications to the elimination of substrate diffusing and convecting through immobilized enzyme

Some optimization problems concerning a substrate in a fluid are considered. The concentration of the substrate is affected by diffusion, convection, and elimination by enzymes, and the problem is to find the optimal distribution of enzymes. In this paper, the rate of elimination and the transmission coefficient are optimized. Mathematically, these problems are optimal control problems, and they are analyzed by means of Pontryagin's maximum principle.     

Kinetic features of ethylene polymerization over supported catalysts [2,6‐bis(imino)pyridyl iron dichloride/magnesium dichloride] with AlR3 as an activator

The effects of polymerization temperature, polymerization time, ethylene and hydrogen concentration, and effect of comonomers (hexene‐1, propylene) on the activity of supported catalyst of composition LFeCl₂/MgCl₂‐Al(i‐Bu)₃ (L = 2,6‐bis[1‐(2,6‐dimethylphenylimino)ethyl] pyridyl) and polymer characteristics (molecular weight (MW), molecular‐weight distribution (MWD), molecular structure) have been studied. Effective activation energy of ethylene polymerization over LFeCl₂/MgCl₂‐Al(i‐Bu)₃ has a value typical of supported Ziegler–Natta catalysts (11.9 kcal/mol). The polymerization reaction is of the first order with respect to monomer at the ethylene concentration >0.2 mol/L. Addition of small amounts of hydrogen (9–17%) significantly increases the activity; however, further increase in hydrogen concentration decreases the activity. The IRS and DSC analysis of PE indicates that catalyst LFeCl₂/MgCl₂‐Al(i‐Bu)₃ has a very low copolymerizing ability toward propylene and hexene‐1. MW and MWD of PE produced over these catalysts depend on the polymerization time, ethylene and hexene‐1 concentration. The activation effect of hydrogen and other kinetic features of ethylene polymerization over supported catalysts based on the Fe (II) complexes are discussed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5057–5066, 2007     

多线性Calderón-Zygmund算子的加权有界性

建立了多线性Calderón-Zygmund算子在比幂权空间更一般的Herz空间和Herz型Hardy空间上的有界性.作为推论,得到了该算子的幂权估计.在这些幂权估计中,权指标可以突破Ap权的指标限制,显示出和经典Calderón-Zygmund算子本质的区别.     

一类最高权向量环的Krull维数

本文给出Om×GLn作用于Cm,n上的复多项式环上的最高权向量环的Krull维数公式,从而改正了Aslaksen,Tan及Zhu的一个错误.     

一类Lagrangian对偶问题的零对偶间隙性质及其最优路径的收敛性

针对一般的非线性规划问题,利用某些Lagrange型函数给出了一类Lagrangian对偶问题的一般模型,并证明它与原问题之间存在零对偶间隙．针对具体的一类增广La- grangian对偶问题以及几类由非线性卷积函数构成的Lagrangian对偶问题,详细讨论了零对偶间隙的存在性．进一步,讨论了在最优路径存在的前提下,最优路径的收敛性质．     

2‐Cyanoprop‐2‐yl dithiobenzoate mediated reversible addition–fragmentation chain transfer polymerization of acrylonitrile targeting a polymer with a higher molecular weight

The reversible addition–fragmentation chain transfer (RAFT) polymerization of acrylonitrile (AN) mediated by 2‐cyanoprop‐2‐yl dithiobenzoate was first applied to synthesize polyacrylonitrile (PAN) with a high molecular weight up to 32,800 and a polydispersity index as low as 1.29. The key to success was ascribed to the optimization of the experimental conditions to increase the fragmentation reaction efficiency of the intermediate radical. In accordance with the atom transfer radical polymerization of AN, ethylene carbonate was also a better solvent candidate for providing higher controlled/living RAFT polymerization behaviors than dimethylformamide and dimethyl sulfoxide. The various experimental parameters, including the temperature, the molar ratio of dithiobenzoate to the initiator, the molar ratio of the monomer to dithiobenzoate, the monomer concentration, and the addition of the comonomer, were varied to improve the control of the molecular weight and polydispersity index. The molecular weights of PANs were validated by gel permeation chromatography along with a universal calibration procedure and intrinsic viscosity measurements. ¹H NMR analysis confirmed the high chain‐end functionality of the resultant polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1272–1281, 2007     

Duality theorems for convex problems with time delay

In this paper, we examine a class of convex problems of Bolza type, involving a time delay in the state. It encompasses a variety of time-delay problems arising in the calculus of variations and optimal control. A duality analysis is carried out which, among other things, leads to a characterization of minimizers in terms of the Euler-Lagrange inclusion. The results obtained improve in significant respects on what is achievable by techniques previously employed, based on elimination of the time delay by introduction of an infinite-dimensional state space or on the method of steps.     

The construction of infinite families of any k-tight optimal and singular k-tight optimal directed double loop networks

The double loop network(DLN)is a circulant digraph with n nodes and outdegree 2.It is an important topological structure of computer interconnection networks and has been widely used in the designing of local area networks and distributed systems.Given the number n of nodes,how to construct a DLN which has minimum diameter?This problem has attracted great attention.A related and longtime unsolved problem is:for any given non-negative integer k,is there an infinite family of k-tight optimal DLN?In this paper,two main results are obtained:(1)for any k≥0,the infinite families of k-tight optimal DLN can be constructed,where the number n(k,e,c)of their nodes is a polynomial of degree 2 in e with integral coefficients containing a parameter c.(2)for any k≥0, an infinite family of singular k-tight optimal DLN can be constructed.