CARBONIZED FIBROUS RESIN AS A NEW SORBENT FOR SAMPLING POLYCYCLIC AROMATIC HYDROCARBONS (PAHS) IN AMBIENT AIR

1. INTRODUCTION When investigating contaminated sites it is often essential to determine specific pollutants in a large number of ambient air samples. Amongst these sites, polycylic aromatic hydrocarbons (PAHs) are a major class of compounds that hav…     

New dynamic axial compression columns with means for monitoring floating adapter position. Column design and utilisation in low pressure LC on soft packings

Summary The design of new dynamic, axial-compression columns with a system for continous packed bed adjustment and monitoring of the floating adapter position is described. The columns are meant for liquid chromatography at low pressures (up to 8 bar) in aqueous and organic media with stationary phases of all types. The columns have adapter position pickups for continuous automatic monitoring of the bed height (original “swellographic” monitoring). The column described with gas pressurisation was tested with soft Sephadex G-10 and G-25. In spite of the reduction in external porosity there was no dramatic increase in back-pressure. The column proved to provide long-term stability of the packed bed and improvement in resolution. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

STUDIES ON PREPARATION OF INACTIVATED VACCINES FROM CELL CULTURES OF MINK ENTERITIS VIRUS (MEV) AND THEIR IMMUNITY

In this paper, superhigh reproductive rate strains of MEV with titre more than HA8192* or TCID50 log9.7 10 have been achieved both by cultivation in cell lines with different susceptibility to MEV and by isolating and identifying in field by the author. The systematic tests proved that S18 and L12 strains of MEV are the best strains for vaccine preparation. In this study, the best means for the tissue cultivation of MEV and the most advanced technological process for the production and detection of serum-free cell-cultured MEV fluids with super-high HA titre in batches in large quantities have been established for the first time. Optimum conditions for MEV inactivation were determined, and safe and effective inactivated vaccines with mineral oil or A1(OH)3 gel adjuvant were successfully prepared with serum-free cell-cultured MEV fluids. Both vaccines with different adjuvants can be manufactured in batches in large quantities and have been widely used all over China since 1986. The change laws of the imm     

Therapeutic monitoring of imipramine and desipramine by micellar liquid chromatography with direct injection and electrochemical detection

A micellar liquid chromatographic (MLC) procedure was developed for the clinical monitoring of imipramine and its active metabolite, desipramine. The determination of these highly hydrophobic substances was carried out after direct injection of the serum samples using a mobile phase composed of 0.15 m SDS--6% (v/v) pentanol buffered at pH 7, pumped at 1.5 mL/min into a C(18) column (250 x 4.6 mm), and electrochemical detection at 650 mV. Using this MLC method, calibration was linear (r > 0.995) and the limits of detection (ng/mL) were 0.34 and 0.24 for imipramine and desipramine, respectively. Repeatabilities and intermediate precision were tested at three different concentrations in the calibration range and a CV (%) below 2.2 was obtained. In this MLC procedure, the serum is determined without treatment, thus allowing repeated serial injections without changes in retention factors, and reducing the time and consumables required to carry out the pretreatment process. The assay method can be applied to the routine determination of serum imipramine and its metabolite in therapeutic drug monitoring.     

The state of conservation of painted surfaces in the presence of accelerated ageing processes monitored by use of FT-Raman spectroscopy and multivariate control charts

A new method has been developed for monitoring the degradation of paintings. Two inorganic pigments (ultramarine blue and red ochre) were blended with linseed oil and spread on canvas. Each canvas was subjected to simulated accelerated ageing in the presence of typical degradation agents (UV radiation and acidic solution). Periodically the painted surfaces were analysed by FT-Raman, to investigate the status of the surface. The data obtained were analysed by principal component analysis (PCA). Finally the Shewhart and cumulative sum control charts based on the relevant principal components (PC) and the so called scores monitoring and residuals tracking (SMART) charts were built. The method based on the use of PC to describe the process was found to enable identification of the presence of relevant modification occurring on the surface of the samples studied.Electronic supplementary material Supplementary material is available for this article at     

A sensitive and rapid liquid chromatography tandem mass spectrometry method for quantitative determination of 7-ethyl-10-hydroxycamptothecin (SN-38) in human plasma containing liposome-based SN-38 (LE-SN38)

7-Ethyl-10-hydroxycamptothecin (SN-38) is an active metabolite of Irinotecan (CPT-11), an anticancer pro-drug. To support clinical pharmacokinetic studies for liposome based formulation of SN-38 (LE-SN38) in cancer patients, a rapid, simple and sensitive liquid chromatography tandem mass spectrometry (LC-MS/MS) method has been developed and validated for the quantification of total SN-38 in human plasma. Sample preparation was carried out by one-step protein precipitation using cold acetonitrile with 0.5% acetic acid (v/v). Camptothecin was used as an internal standard (IS). Chromatographic separation of SN-38 and IS was achieved using a Synergi Hydro-RP column (C(18), 50 x 2 mm, 4 micro m), with a gradient elution of acetonitrile and 0.1% acetic acid. After ionization in electrospray source (positive ions), the acquisition was performed in the multiple reactions monitoring mode. Quantitation was accomplished using the precursor-->product ion combinations of m/z 393.1-->349.2 for SN-38 and 349.1-->305.1 for IS. The quantification limit of 0.05 ng/mL was achieved by using much lower volume (0.2 mL) of plasma and in the presence of LE-SN38. The method was validated over the concentration range of 0.05-400 ng/mL. Accuracy was within +/-12% of nominal at all concentration levels. Inter-day and intra-day precisions expressed as percentage coefficient of variation (%CVs) for quality control (QC) samples were less than 14 and 5%, respectively.     

在线质谱仪在车内VOCs现场快速监测中的应用

挥发性有机物(VOCs)影响车内空气质量和驾乘者的身心健康。自主研发的在线挥发性有机物质谱仪(SPI-MS 2000),实现了有机物分子的单光子电离,产生无碎片的分子离子,可实现秒级响应,仪器的质量分辨率优于800 FWHM,质量精度优于0.02 amu,对甲苯的测定限优于3μg/m^3,且在3~8000μg/m^3范围内有良好的线性关系。将该仪器应用于某客车车内空气的在线检测:在5 s内检测到20多种微克~毫克每立方米量级的有机物。该仪器在车内VOCs现场快速监测方面有广泛的应用前景。     

A Self‐Sampling‐and‐Flow Biosensor for Continuous Monitoring

A self‐sampling‐and‐flow biosensor was fabricated by sandwiching a nitrocellulose strip on the working electrode side of the double‐sided microporous gold electrodes and a wicking pad on the counter electrode side. The double‐sided microporous electrodes were formed by plasma sputtering of gold on a porous nylon substrate. Sample was taken up to the enzyme‐immobilized working electrode by the capillary action of the front nitrocellulose strip dipped into the sample solution, analyzed electrochemically at the enzyme‐immobilized electrode, and diffuses out to the backside wicking pad through the micropores of the electrodes, constituting a complete flow cell device with no mechanical liquid‐transporting device. Biosensor was formed by co‐immobilizing the glucose oxidase and electron transfer mediator (ferrocene acetic acid) on the thioctic acid self‐assembled monolayer‐modified working electrode. A typical response time of the biosensor was about 5 min with the sensitivity of 2.98 nA/mM glucose, providing linear response up to 22.5 mM. To demonstrate the use of self‐sampling‐and‐flow biosensor, the consumption rate of glucose in the presence of yeast was monitored for five days.     

Progress in the realisation of an autonomous environmental monitoring device for ammonia

Progress in the development of a micro-fluidic system for colorimetric monitoring of ammonia in drinking and wastewater is described. The ultimate goal is to have a miniaturised instrument that can produce accurate, reliable measurements, is easy to operate, has minimal power consumption, and can operate autonomously for a year. In this study, the indophenol reaction is incorporated into a simple, reliable analytical micro-fluidic system. Absorbance measurements for the blue ammonia-indophenol complex formed in the micro-fluidic system are shown. A key issue is the limiting stability of hypochlorite, a reagent used in the assay. The effects of hypochlorite concentration and impurities on the stability of hypochlorite are investigated and discussed. Decomposition is shown to be very dependent on the presence of heavy-metal impurities. With low levels of these catalytic metals and careful storage, hypochlorite has been shown to be stable for over a year.     

Correlation of antioxidant depletion and mechanical performance during thermal degradation of an HTPB elastomer

Thermal degradation studies of a stabilized HTPB based elastomer were conducted at temperatures from 50 °C to 110 °C. The concentration of extractable antioxidant (AO2246) in the polymer was quantified via AO extraction and a gas chromatography-based method using internal standards. The decrease in extractable AO levels as a function of time and temperature was evaluated and correlated with mechanical property changes. Most importantly, AO depletion features were found to be temperature dependent. At elevated temperatures (>80 °C) extractable AO levels decreased rapidly and faster than the concurrent loss in mechanical properties. While extractable AO concentrations decrease quickly, the material is able to maintain some useful mechanical properties, perhaps via non-extractable or grafted AO species formed during degradation providing additional protection. At lower aging temperatures extractable or free AO levels decreased more slowly than the mechanical properties. Therefore, for condition monitoring purposes a universal correlation between AO levels and aging state or material condition could not be established. Most importantly, however, loss of mechanical properties and oxidative degradation is observed at lower temperatures despite significant levels of free antioxidant in the material. The antioxidant appears to be limited in its effectiveness to completely prevent degradation reactions, or only fractions of the total AO available are actually involved in the inhibition process.