Screen-printed electrochemical hybridization biosensor for the detection of DNA sequences from the Escherichia coli pathogen

An electrochemical biosensor for the specific detection of short DNA sequences from the E. coli pathogen is described. This hybridization device relies on the immobilization of a 25-mer oligonucleotide probe, from the E. coli lacZ gene, onto a screen-printed carbon electrode. Chronopotentiometric detection of the Co(bpy)₃⁺³ indicator is used for monitoring the hybridization event. Numerous variables of the assay protocol, including those of the probe immobilization step, the hybridization event, and the indicator association/detection, are characterized and optimized. Hybridization times of 2- and 30-min are sufficient for detecting 300- and 50 ng/mL, respectively, of the E. coli DNA target. Applicability to analysis of untreated environmental water samples is illustrated. Such single-use electrochemical sensors hold great promise for decentralized environmental and food testing for the E. coli pathogen.     

A new high-performance liquid chromatographic/electrospray ionization tandem mass spectrometric method for the simultaneous determination of cyclophosphamide, methotrexate and 5-fluorouracil as markers of surface contamination for occupational exposure monitoring

A new high-performance liquid chromatographic/electrospray ionization tandem mass spectrometric (HPLC/ESI-MS/MS) method was developed for the simultaneous quantification of 5-fluorouracil (5FU), methotrexate (MTX) and cyclophosphamide (CP) in environmental samples. These compounds, commonly used in the treatment of cancer, are recognized as genotoxic. In order to estimate the occupational exposure of hospital personnel handling these drugs, wipe samples were taken from the working surfaces and directly analyzed (with trophosphamide as internal standard) using a reversed-phase capillary column and MS/MS detection. This is the first HPLC/MS/MS method for the simultaneous determination of 5FU, MTX and CP. The present method offers high sensitivity, with detection limits of 1.1 microg l(-1) for MTX and CP and 33.3 microg l(-1) for 5FU, avoiding any sample preconcentration procedure. Rapidity, specificity, high accuracy (mean values between 92.4 and 99.9%) and precision (mean RSD values between 3.4 and 12.1%) make the method suitable for the routine determination of these three antineoplastic drugs.     

Determination of dissolved organic nitrogen in natural waters using high-temperature catalytic oxidation

Studies on nitrogen in natural waters have generally focussed on dissolved inorganic nitrogen (DIN), primarily because of relative ease of analysis and the important influence of DIN on water quality. Advances in analytical techniques now permit the systematic study of dissolved organic nitrogen (DON), and this work has shown that DON is quantitatively significant in many waters. This article describes the sampling and analytical protocols required for rapid, precise and reliable determinations of DON, involving high-temperature catalytic oxidation (HTCO), coupled to chemiluminescence detection. This approach simultaneously determines dissolved organic carbon (DOC) and total dissolved nitrogen (TDN), and DON is derived by subtraction of DIN measured by colorimetry. The DON determination is simple to perform, exhibits excellent precision (<1% for C and 1.5% for N) and is applicable to a wide range of natural waters.     

Phosphate-selective electrodes containing immobilised ionophores

Phosphate selective electrodes have been produced based upon rubbery membranes containing heterocylic macrocycles as sensors covalently bound to a cross-linked polystyrene-block–polybutadiene-block–polystyrene (SBS) polymer. The membranes were robust and the best HPO₄²⁻-selective membrane fabricated was composed of 7.1% (m/m) dicumyl peroxide, 28.3% (m/m) 2-nitrophenyloctylether, 9.8% (m/m) 3-(10-undecenyl)-1,5,8-triazacyclodecane-2,4-dione, 31.0% (m/m) SBS and 23.8% (m/m) PoleStar™ 200R (clay-based filler). The characteristics of this electrode were a linear Nernstian range of 3.9×10⁻³ to 1×10⁻⁶ mol dm⁻³ HPO₄²⁻ with a limit of detection of 1.0×10⁻⁶ mol dm⁻³ HPO₄²⁻, a slope of −29.7±0.9 mV per activity decade and a pH range from 6 to 8. Selectivity coefficients for phosphate against various interfering anions (chloride, sulfate and nitrate) were determined. Response times were 2 min or under, stability of response and electrode lifetime in continuous use were also very satisfactory. The response behavior of HPO₄²⁻-ISEs based upon mobile and bound ionophores was comparable and suggests that mobility of the ionophore is not necessary to obtain a working ISE and that covalent binding of ionophores can be used to produce ISEs of increased stability and robustness.     

Development of a laccase-based flow injection electrochemical biosensor for the determination of phenolic compounds and its application for monitoring remediation of Kraft E1 paper mill effluent

This paper describes the development of a new system for amperometric determination of phenolic compounds, and its application for monitoring these compounds in paper mill effluent. The method was based on a flow system, a dialysis sampler, and a laccase-based biosensor. The performance of this system was investigated with respect to pH, ionic strength, working potential, and flow-rate dependence. The biosensor showed an excellent long-term stability allowing measurements for over than 3 months. The sensitivity of laccase-based biosensor was tested for phenol, p-chlorophenol, guaiacol and chloroguaiacol; the detector presented selective measurements of micromolar concentration of these compounds. The integration of a dialysis membrane sampling in the system protected the biosensor surface from fouling and gave independence of sample conditions that commonly influence the biosensor performance. These favorable characteristics allowed its application for direct measurements in complex media with no sample pretreatment. This ability was confirmed employing this system in a continuous analysis of phenolic compounds during the remediation of paper mill effluent by ozonization process.     

Dynamics of gel isoelectric focusing with ampholytic dyes monitored by camera in real-time

The dynamics of gel isoelectric focusing were studied by using amphoteric low-molecular-mass colored substances (isoelectric point markers). The polyacrylamide gel in slab format was in direct contact with the electrodes. In addition to isoelectric focusing with a pH gradient composed of synthetic carrier ampholytes, pH gradients created by simple buffers of acetic acid, 2-(N-morpholino)ethanesulfonic acid, histidine and N,N,N',N'-tetramethylethylenediamine were applied. The progress of the electrofocusing process was monitored by a charge-coupled device camera and video recording. The gradient profile and dynamics were approximated from the positions of isoelectric point markers, which were focused both on boundaries between individual zones of simple buffers and within the zones themselves. The obtained animated records enabled the observation of the entire real focusing run within fractions of a minute, which is useful both for the understanding and optimization of the focusing.     

Determination of heterocyclic aromatic amines (HAA) in commercially available meat products and fish by high performance liquid chromatography—Electrospray tandem mass spectrometry (HPLC-ESI-MS-MS)

Summary Ten heterocyclic aromatic amines (HAA) (1)–(10) were analyzed in commercially available meat products and fish. After sample preparation by Extrelut treatment and subsequent solid phase extraction applying propylsulphonic and C₁₈ silica cartridges, HPLC-ESI-MS-MS using selected reaction monitoring (SRM) and d₃-PhIP and d₃-MeIQx as internal and external standards, respectively, revealed the widely distributed presence of PhIP (8) and MeIQx (4), ranging from 0.1 to 5.3 ng g⁻¹ and 0.1 to 5.2 ng g⁻¹, respectively. Lower amounts were found for 4,8-DiMeIQx (5) and 7,8-DiMeIQx (6), ranging from 0.2 to 2.0 ng g⁻¹ and 0.1 to 0.2 ng g⁻¹, respectively. The other HAA under study, i.e. IQ, MeIQ, 4,7,8-TriMeIQx, Glu-P-1, and Glu-P-2 were not determinable under the experimental conditions used (determination limit 0.1 ng g⁻¹).     

Comparison of the effectiveness of epoxy cure accelerators using a fluorescent molecular probe

A simple optical method for quantitative comparison of the effectiveness of epoxy cure accelerators, used for speeding up the crosslinking process of epoxy resins with cyclic anhydrides, is described. Fluorescent molecular probes and a miniature fiber optic spectrometer have been applied for measurement of the cure kinetics of a model epoxy resin/anhydride composition in the presence of various cure accelerators. A quantitative index of accelerator performance has been determined for several of the most common accelerators.     

Adoption of Common Schemes for Single and Sequential Extractions of Trace Metal in Soils and Sediments

Abstract

The various methods for determining the mode of occurrence of trace metals in sediments and soils have a long history which dates back to the determinations of the availability of metals for plant nutrition performed earlier. Various methods have been developed in the 70′s and 80′s dealing with both single and sequential extraction schemes. Although some schemes received wide acceptance, none of them developed into a commonly accepted procedure. As a result, the information obtained was site-specific and the interpretation of the results scientist-specific. The workshop on single and sequential extraction in sediments and soils held at Sitges     

Monitoring of Airborne Organic Vapors Using Ion Mobility Spectrometry

Abstract

Automated, continuous monitoring of organic vapors in air under three field designs for plume drift was demonstrated using a hand-held ion mobility spectrometer (IMS) in characterizing IMS behavior as a point sensor. In one field study, the IMS was placed 50cm from a 9m² grass plot contaminated with methylsalicylate and response to airborne vapors was recorded during a 13hr period of atmospheric turbulence to illustrate susceptibility of point sensors to wind direction. A similar study under near-quiescent atmospheric conditions was made using dimethylsulfoxide. In a third study, the plume from a point source of dipropyleneglycolmonomethylether was interrogated over a 25m × 12m grid downwind with windspeeds of 6–18km h^?. Laboratory studies were used to measure instrumental response times and influences from potentially interfering atmospheric organic pollutants.