Synthesis and performance of HPTLC plates modified with cyanopropyl- and octadecyl-trichlorosilane

Chemical modification of commercial high performance thin-layer chromatography plates with various mixtures of cyano-propyltrichlorosilane and octadecyltrichlorosilane is described. Surface coverage by different treatments is demonstrated as well as the variations in chromatographic performance. With regard to the development in aqueous media the utility of CN/ ODS plates compared to ODS plates is also shown.     

Characterization of OV-1/FFAP-mixture coated glass capillary columns used for the separation of free fatty acids

As an alternative to acid pretreated UCON and FFAP capillaries for the analysis of wide-boiling free fatty acid mixtures, OV-1 : FFAP phase mixtures were used on high-temperature silylated inert glass capillary columns. The HETP-carrier gas velocity curves, peak asymmetry factors, coating efficiency, gas phase and stationary phase contributions to the mass transfer resistance were determined for various OV-1 : FFAP ratios. Mixed-phase capillaries showed optimum performance at a 2 : 1 OV-1 : FFAP ratio. The thermal and long-term stability of OV-1-stabilized FFAP columns surpassed those of the UCON and pure FFAP reference column used.     

Ionization constants for deuterium oxide in deuterium oxide-organic mixtures

A potentiometric method using a glass electrode has been applied to determination of ionization constants for deuterium oxide (D₂O) in binary mixtures of D₂O with dioxane, tetrahydrofuran, acetone, dimethylsulfoxide, CH₃CH₂OD, and CH₃OD at 25°C. The results are compared with values of ionization constants for H₂O obtained previously in the corresponding H₂O-organic mixtures, and the isotope effect is shown to be small. Further calculations with the D₂O results show that the first five solvents mentioned above are neither appreciably acidic nor basic in D₂O solution, but that CH₃OD shows slightly acidic behavior (pK_a=16.0±0.3).     

Calcined Ni—Al layered double hydroxide as a catalyst for total oxidation of volatile organic compounds: Effect of precursor crystallinity

The effect of hydrothermal treatment on properties (crystallinity, porous structure, reducibility, acidity, basicity, and catalytic activity and selectivity in toluene and ethanol total oxidation) of Ni—Al layered double hydroxide precursors and related mixed oxides was examined. The hydrothermal treatment increased considerably both the content of crystalline phase and LDH crystallite size. On the other hand, only a slight effect of the precursor hydrothermal treatment on crystallinity of the related Ni—Al mixed oxides obtained by calcination at 450°C was observed. The reducibility of NiO particles appeared to be hindered considerably compared to the reducibility of pure NiO. Catalytic activity of the Ni—Al mixed oxides prepared from the precursors hydrothermally treated for a short time (4 h) was the highest. The highest amount of acetaldehyde formed during the total oxidation of ethanol, i.e. the worst selectivity was found for the calcined Ni—Al LDH without hydrothermal treatment. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

药用缓释辅料——羟丙基甲基纤维素的合成及其缓释性能的研究

本文研究了药物缓释材料HPMC的合成方法,探讨了碱纤维素制备,醚化剂浓度,混合醚化剂配经以及产品后处理对高粘度HPMC的影响。本文还初步对KCl,氨茶碱,硝酸异山梨醇酯等药物采用合成的HPMC作辅料,进行了缓释制剂的研究,结果表明合成的HPMC具有满意的缓释性能。     

Kinetics of the thermal dehydrations and decompositions of some mixed metal oxalates

Both isothermal and programmed temperature experiments have been used to obtain kinetic parameters for the dehydrations and the decompositions in nitrogen of the mixed metal oxalates: FeCu(ox)₂·3H₂O, CoCu(ox)₂·3H₂O and NiCu(ox)₂·3.5H₂O, [ox=C₂O₄]. Results are compared with those reported for the thermal decompositions of the individual metal oxalates, Cuox, Coox·2H₂O, Niox·2H₂O and Feox·2H₂O. X-ray photoelectron spectroscopy (XPS) was also used to examinee the individual and the mixed oxalates. Dehydrations of the mixed oxalates were mainly deceleratory processes with activation energies (80 to 90 kJ·mol⁻¹), similar to those reported for the individual hydrated oxalates. Temperature ranges for dehydration were broadly similar for all the hydrates studied here (130 to 180°C). Decompositions of the mixed oxalates were all complex endothermic processes with no obvious resemblance to the exothermic reaction of Cuox, or the reactions of physical mixtures of the corresponding individual oxalates. The order of decreasing stability, as indicated by the temperature ranges giving comparable decomposition rates, was NiCu(ox)₂>CoCu(ox)₂>FeCu(ox)₂, which also corresponds to the order of increasing covalency of the Cu−O bonds as shown by XPS. In celebration of the 60^th birthday of Dr. Andrew K. Galwey     

Molecular structure of (diethyldithiocarbomoyl)diphenylthiophosphinate

X-Ray study of (diethyldithiocarbomoyl)diphenylthiophosphinate was carried out. AZ-conformation of the diethyldithiocarbomoyl ligand, which results in a short nonvalent intramolecular P...S contact (3.315 Å), is realized in the molecule. Steric hindrances in the molecule increase the P-S-C bond angle to 106.39°.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1978–1980, October, 1995.The work was financially supported by the International Science Foundation (Gram RH1 000).     

Products of lithium interaction with nanostructured oxides SnO2-TiO2 and mechanism of charge-discharge of electrodes in a lithium-ion battery

Products of lithium interaction with thin-film nanostructured SnO₂-TiO₂ (ST) oxides are studied with the aid of x-ray diffraction analysis and Moessbauer spectroscopy on the ¹¹⁹Sn nuclei. Electrochemical properties of a series of the ST electrodes with different concentrations of TiO₂ varied from 0 to 20 mol % are also examined. It is concluded that the specific feature of the charge-discharge mechanism of the ST electrodes is a significant participation of oxygen in reversible reactions during insertion and extraction of lithium as compared with an alloying mechanism of operation of tin-containing anodes. The leading role in this is played by titanium oxide. Remaining stable towards reduction by lithium, it facilitates the holding of the neighboring layers of SnO₂ in a nanodisperse state and in an oxidized state. The effect of a decrease in the capacity degradation in modified TiO₂ electrodes, which is discovered in this work, is attributed to the hampering of the growth of nanocrystallites of β-Sn by interlayers of tin and titanium oxides mentioned above.     

Thallium-205 NMR spectroscopy. Solvation of the thallous ion in dilute aqueous-amide and amide-amide binary solvent systems of formamide,N-methylformamide,andN-ethylformamide

Solvation of the thallous ion in dilute solutions of six binary solvent systems (formamide/water,N-methylformamide/water,N-ethylformamide/water, formamide/N-methylformamide, formamide/N-ethylformamide, andN-methylformamide/N-ethylformamide) was studied with²⁰⁵Tl NMR spectroscopy. An attempt was made to separate solvation effects related to the electrondonating ability (Lewis basicity) of the solvents from effects resulting from structural changes in the solvation sphere. Structural effects were found to be greatest in theN-methylformamide/water system and least in theN-methylformamide/formamide system.     

Ion interaction approach to calculations of volumetric properties of aqueous multiple-solute electrolyte solutions

The ion interaction approach developed by Pitzer was used for the prediction of volumetric properties of mixed electrolyte solutions at 25°C based on parameters calculated from experimental data for single-solute electrolyte solutions. Such an approach was shown to be especially effective for application to the calculation of volumetric properties of natural hypersaline brines and of industrial electrolyte solutions of large complexity. The use of the latest recommended sets of volumetric ion interaction parameters for single electrolyte solutions and symmetrical mixing parameters for Na–K–Cl ion combinations considerably improved the precision of the density calculations of highly concentrated mixed electrolyte solutions and of various natural waters.