Traceability of (values carried by) reference materials

 Traceability is a property of the result of a measurement. Since values carried by (reference) materials must also have been obtained, of necessity, by measurement, the definition of traceability also applies to reference materials. It is extremely helpful to give the traceability (of the origin) of a reference material a separate name, i.e. 'trackability'. An analysis of the function of values carried by reference materials, shows that they can fulfill different functions, depending on the intended use. One of the functions located outside the traceability chain – and hence not very relevant for establishing traceability – is evaluating the approximate size of the uncertainty of the measurement of an unknown sample by performing a similar measurement on a reference material, used as a 'simulated sample'. Another function is located inside the traceability chain, where the reference material is used as an added 'internal standard'. Then, the value carried by the reference material is essential for establishing the traceability of the measured value of an unknown sample. In the latter application, the reference material acts as an 'amount standard' (the certified value for amount is used). Received: 11 November 1999 / Accepted: 24 February 2000     

诱导效应指数与含硫含氮的低碳直链有机化合物的标准汽化热

本文利用诱导效应指数建立了含硫含氮的低碳直链有机物的标准汽化热的简单估算方法，我们利用此法计算了一些含硫含氮的直链有机物的标准汽化热，４１个可比较值的相对误差均在５％以内。     

标准气体在检测可燃气体报警器中的重要性

介绍可燃气体报警器的检测现状，分析可燃气体报警器检测元件中毒的原因，强调了检测可燃气体报警器时使用标准气体的重要性，以及标准气体的正确使用。     

CaClH2PO4·H2O的合成及其性质的研究

本文介绍了CaClH_2PO_4·H_2O的合成和纯化的方法。用精密量热计系统测定了CaClH_2PO_4·H_2O的标准生成焓在298.15K时为-2282.34kJ mol~(-1)。评述和讨论了热分解反应的化学动力学性质,测定了分解反应的级数和表现活化能。     

Simple method for the determination of rosiglitazone in human plasma using a commercially available internal standard

To the best of our knowledge, bioanalytical methods to determine rosiglitazone in human plasma reported in literature use internal standards that are not commercially available. Our purpose was to develop a simple method for the determination of rosiglitazone in plasma employing a commercially available internal standard (IS). After the addition of celecoxib (IS), plasma (0.25 mL) samples were extracted into ethyl acetate. The residue after evaporation of the organic layer was dissolved in 750 microL of mobile phase and 50 microL was injected on to HPLC. The separation was achieved using a Hichrom KR 100, 250 x 4.6 mm C(18) with a mobile phase composition potassium dihydrogen phosphate buffer (0.01 m, pH 6.5):acetonitrile:methanol (40:50:10, v/v/v). The flow-rate of the mobile phase was set at 1 mL/min. The column eluate was monitored by fluorescence detector set at an excitation wavelength of 247 nm and emission wavelength of 367 nm. Linear relationships (r(2) > 0.99) were observed between the peak area ratio rosiglitazone to IS vs rosiglitazone concentrations across the concentration range 5-1000 ng/mL. The intra-run precision (%RSD) and accuracy (%Dev) in the measurement of rosiglitazone were <+/-10.69 and <-12.35%, respectively across the QC levels (50-1000 ng/mL). The extraction efficiency was >80% for both rosiglitazone and IS from human plasma. The lower limit of quantitation of the assay was 5 ng/mL. In summary, the methodology for rosiglitazone measurement in plasma was simple, sensitive and employed a commercially available IS.     

Thermal decomposition of surface compounds for the generation of small quantities of acetaldehyde: Calibration of a thermal desorption-gas chromatography-flame ionization detection

The paper presents a new method for the generation of acetaldehyde in the amounts that allow to calibrate the measuring system. The method is based on thermal decomposition of surface compounds at the range 130-190 °C, in which an acetaldehyde as the decomposition product is released. The synthetic pathway leading to the desired surface compounds is described. Investigations demonstrated that the synthesis of the compounds on the surface of the support material (silica gel) was carried out homogeneously. The technique proposed was used for the generation of gaseous standard mixtures containing acetaldehyde for the calibration of a thermal desorber-gas chromatograph-flame ionization detector system.     

Determination of the apparent standard potential of the Dy/Dy(Ⅲ) system in the LiCl-KCl eutectic

The apparent standard potential of Dy/Dy(III) system in the LiCl-KCl eutectic has been determined by the logarithmic analysis of the semi-integrals of voltammograms, logarithmic analysis of chronopotentiograms and the open circuit potentiometry. The dysprosium equilibrium potentiab for various concentration of dysprosium chloride in the LiCl-KCl eutectic melt between 400-500℃ were first determined experimentally, and the apparent standard potential of this system and its temperature dependance have been calculated.     

A study for quality evaluation of Taxilli Herba from different hosts based on fingerprint-activity relationship modeling and multivariate statistical analysis

In this study, a fingerprint-activity relationship modeling between chemical fingerprints and antirheumatic activity was established, and multivariate statistical analysis was used to evaluate the quality of Taxilli Herba (TH) from different hosts. Characteristic fingerprints of 20 batches of TH samples were generated by high-performance liquid chromatography coupled with triple quadrupole-time of flight tandem mass spectrometry (HPLC-Triple TOF-MS/MS), and the similarity analysis was calculated based on thirteen common characteristic peaks by hierarchical clustering analysis (HCA). Subsequently, nine efficacy markers were discovered by combining fingerprints and antirheumatic activity through grey correlation analysis (GCA) and bivariate correlation analysis (BCA). Meanwhile, the content of 5 constituents in 9 markers was determined by high-performance liquid chromatography coupled with triple quadrupole-linear ion trap tandem mass spectrometry (HPLC-QTRAP-MS/MS). The comprehensive quality of TH was assessed using multivariate statistical analysis, including principal components analysis (PCA) and technique for order preference by similarity to ideal solution (TOPSIS). The results showed that a high dose of TH extract could markedly ameliorate arthritis damage compared to other doses, with flavonoids playing an important role in the antirheumatic activity. The comprehensive quality of samples from Morus alba L. (SS) was superior to those from Liquidambar formosana Hance (FXS). The present study will demonstrate the markers associated with efficacy, and provide an applicable strategy for more comprehensive quality control and evaluation of TH.     

Application of high resolution ICP-spectrometry to the determination of B,Be, Co,Mo and Sn in soils and similar matrices

The most sensitive emission lines for the elements B, Be, Co and Mo are strongly influenced by disturbing emission lines of Fe using normal optical resolution. The advantages of high resolution, applying the new ICP-spectrometer JY 38 Plus (Jobin-Yvon, France) with the 2400 lines/mm grating measuring in the 1st and 2nd order will be discussed. Beside the concentrations in soils, sediments and sludges, applying aqua regia and HF decomposition methods, the detection limits in these matrices will be given. The possibilities of ICP-spectrometry for the determination of the above-mentioned elements are shown at the examples of SRMs (standard reference materials). The materials used here were three soils and three sludges from the BCR (Community Bureau of Reference, European Communities) and one sediment from NBS (National Bureau of Standards, USA). For example, the most sensitive and normally used line for the determination of boron at 249.7733 nm cannot be used in case of this type of matrix due to normally high Fe-concentrations and due to a strong Fe-interference. Therefore, it is necessary to use the line at 249.6778 nm, where an interference-free measurement can be achieved in case of high optical resolution. The measured B-contents in these samples are in the range of 20 to 60 g/g, for Co in the 10 g/g region, for Be well below 1 g/g, for Sn between 3 and 400 g/g. Mo was only detectable in the sludge samples (limit of determination 0.5 g/g).Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

Quantitative HPTLC determination of prostaglandin E1

Direct in situ determination of PGE₁ in dioxane/water (1:1) at concentrations between 50 μg/ml and 1 mg/ml is described. HPTLC of PGE₁ was carried out on HPTLC Kieselgel 60 o.F. plates; application (200 nl) was with a Nano-Appllcator and ethyl acetate/formic acid (400:5, v/v) served as mobile phase. The spots were located by dipping the plates into a 3% cupric acetate solution in 15% aqueous phosphoric acid, followed by heating at 120°C for 15 min. The plates were then evaluated directly at λ = 345 nm by chromatogram spectrometry. The coefficient of variation is 3.6%.