Ab initio quantum chemical studies of the reactions of CF3CFHO2 with HO2

The potential energy surface (PES) for the CF₃CFHO₂+HO₂ reaction has been theoretically investigated using the DFT [B3LYP/6‐311G(d,p)] and B3LYP/6‐311++G(3df,3pd)//B3LYP/6‐311G(d,p) levels of theory. Both singlet and triplet PESs are investigated. The reaction mechanism on the triplet surface is simple. It is revealed that the formation of CF₃CFHOOH+³O₂ is the dominant channel on the triplet surface. On the basis of the ab initio data, the total rate constants for the reaction CF₃CFHO₂+HO₂ in the T = 210–500 K range have been computed using conventional transition state theory with Wigner's tunneling correction and have been fitted by a rate constant expression as k = 1.04 ×10^?12(cm³ molecule^?1 s^?1) exp (700.33/T). Calculated transition state rate constants with Wigner's tunneling correction for the reaction CF₃CFHO₂+HO₂ are in good agreement with the available experimental values. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Evaluation of thermodynamic properties of irreversible protein thermal unfolding measured by DSC

Summary We assessed the applicability of the extrapolation procedure at infinite scanning rate to differential scanning calorimetry (DSC) data related to irreversible protein unfolding. To this aim, an array of DSC curves have been simulated on the basis of the Lumry-Eyring model N↔U→F. The results obtained confirmed that when the apparent equilibrium constant K_{app (T=T1/2)} is lower than 3, the application of the extrapolation procedure provides accurate thermodynamic parameters. Although this procedure applies only to monomeric proteins for which the Lumry-Eyring model is a reasonable approximation, it will hopefully contribute to increase the potential of DSC in obtaining reliable thermodynamic information regarding the folding/unfolding equilibrium.     

Cure behavior of epoxy resin/MMT/DETA nanocomposite

The Flory's gelation theory, non-equilibrium thermodynamic fluctuation theory and Avrami equation have been used to predict the gel time t _g and the cure behavior of epoxy resin/organo-montmorillonite/diethylenetriamine intercalated nanocomposites at various temperatures and organo-montmorillonite loadings. The theoretical prediction is in good agreement with the experimental results obtained by dynamic torsional vibration method, and the results show that the addition of organo-montmorillonite reduces the gelation time t _gand increases the rate of curing reaction, the value of k, and half-time of cure after gelation point t_1/2 decreases with the increasing of cure temperature, and the value of n is ~2 at the lower temperatures (<60°C) and decreases to ~1.5 as the temperature increases, and the addition of organo-montmorillonite decreases the apparent activation energy of the cure reaction before gelation point, but has no apparent effect on the apparent activation energy of the cure reaction after gelation point. There is no special curing process required for the formation of epoxy resin/organo-montmorillonite/diethylenetriamine intercalated nanocomposite. This revised version was published online in July 2006 with corrections to the Cover Date.     

Crosslinking and characterization of commercially available poly(VDF-co-HFP) copolymers with 2,4,4-trimethyl-1,6-hexanediamine

Fluorinated copolymers are well known for their large range of applications. These applications can be improved by grafting or crosslinking of several agents. The mechanism of crosslinking of hexamethylene diamine and 2,4,4-trimethyl-1,6-hexanediamine is well known and occurs in four different steps. To elaborate a film of commercially available poly(VDF-co-HFP) copolymer crosslinked by 2,4,4-trimethyl-1,6-hexanediamine, a step of press cure under air is necessary. Temperature, time and pressure were optimised by regarding the solubility of the press cured films, the mechanical properties, the swelling rate in methyl ethyl ketone, and the degradation of the films. The best temperature, time and pressure for press cure were 150 °C, from 15 to 30 min, and 20 bars, respectively. Other properties of crosslinked poly(VDF-co-HFP) copolymers containing 10 mol.% and 20 mol.% of HFP were characterized. First, all films were insoluble in concentrated HCl. Secondly, swelling rates of different amounts of diamine crosslinked copolymers were measured in ethylene carbonate/dimethyl carbonate and in methyl ethyl ketone; it was proved that the higher the molar percentage of diamine, the higher the crosslinking density, so the lower the swelling rate. Concerning thermal properties, glass transition temperature mainly increased when the amount of diamine increased. Thermal stability measurements showed a higher decomposition temperature when the percentage of diamine was very low (5 mol.%). Finally, mechanical properties were measured by dynamic mechanical analysis; the storage tensile modulus (E′) of a diamine crosslinked Kynar^® copolymer versus temperature exhibited a high drop because Kynar^® was a highly amorphous copolymer. Moreover, the higher the amount of diamine, the higher the rubbery modulus.     

Kinetics and mechanisms in carbocationic polymerization: The quest for true rate constants

This article is a critical analysis of kinetic dataavailable on carbocationic polymerizations. A survey of published propagation rate constant (k_p) data revealed several orders of magnitude differences. In this article, an explanation of this apparent discrepancy is offered with a case study involving the carbocationic polymerization of 2,4,6‐trimethylstyrene (TMS). With the polymerization mechanism originally proposed for this system, k_p = 1.35 × 10⁴ L mol^?1 s^?1 was extracted from experimental data with the Predici polyreaction package. The alternative mechanism yielded k_p = 1.01 × 10⁷ L mol^?1 s^?1, close to that predicted by Mayr's Linear Free Energy Relationship (LFER). We propose that true rate constants can only be obtained from direct competition experiments or from kinetic interpretation based on independently proven mechanisms. The second part of this review discusses critical analysis of the temperature and concentration dependence of various living IB systems. Comparison of the temperature dependence in systems initiated with 2‐ chloro‐2,4, 4‐ trimethylpentane (TMPCl)/TiCl₄ from various laboratories yielded of ΔH ～?25 and ?34.5 kJ/mol for high and low TMPCl/TiCl₄ ratios, respectively. Aromatic (cumyl‐type) initiators show ΔH ～ ?40 kJ/mol, whereas H₂O/TiCl₄ in the presence of the strong electron‐ pair donor dimethylacetamide gave ΔH = ?12 kJ/mol. The significant differences indicate different underlying mechanisms with complex elementary reactions. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5394–5413, 2005     

C60-地塞米松的激光激发

利用激光光解装置检测了C60-地塞米松(C60-DE)的苯溶液在355 nm激光照射下产生的激发三重态, 3C60-DE*出现四个吸收峰, 分别位于700、440、350 和310 nm. 在330 nm处观察到了它的漂白吸收最大值, 这与其基态吸收最大值相对应. 3C60-DE*能够将能量转移给O2分子而淬灭. 与3C60*相比, 3C60-DE*的三重态鄄三重态(T-T)淬灭速率常数减小(3C60*为(5.03±1.31)×109 L·mol-1·s-1, 3C60-DE*为(3.53±0.87)×109 L·mol-1·s-1), 而寿命增加了(3C60*为(12.0±2.6) μs, 3C60-DE*为(18.0±3.3) μs), 这可能是C60分子上连接了地塞米松分子后减小了C60球之间碰撞的几率所致.     

聚氯乙烯结构缺陷和热不稳定性之间关系的研究 2.各种结构缺陷含量和热脱氯化氢速率之间的关系

本工作采用溴加成法、酚解法、FTIR法及臭氧裂解法分别测定了五种不饱和蒸气压下聚合的PVC样品(u-PVC)和五种商品PVC样品(s-PVC)的总双键、总不稳定氯、孤立双键和内部双键的含量.通过研究结构缺陷和PVC的平均分子量及脱HCl速率的相互关系,揭示了不饱和总双键值,总不稳定氯和孤立双键含量彼此的相关性是建立在它们分别与1/M_n的相关性基础之上,从而得出了这三种定量值测得的主要都是端基烯丙基氯结构.根据三者对脱HCl速率的良好线性相关性,首次提出了端基烯丙基氯结构在HCl催化作用下异构化成内部烯丙基氯从而成为脱HCl速率主要原因的机理.     

重氮偶合反应合成超支化偶氮聚合物的光响应性能研究

利用重氮偶合反应和后重氮偶合反应制备了主链和端基含有不同假芪型偶氮苯生色团的超支化偶氮聚合物.利用氢核磁共振、紫外光谱、红外光谱等分析手段确定了合成聚合物的结构、玻璃化转变温度和光谱特性等.研究了聚合物光致二向色性的性能,此聚合物的取向有序度为0.063.用两束相干的P偏振Ar+激光对聚合物膜进行光加工,得到形状规则的正弦波形表面起伏光栅,末端偶氮苯基团的引入极大地增加了超支化偶氮聚合物的光响应速度.     

表面起伏光栅形成速率的影响规律 Ⅰ.偶氮生色团种类和官能度的影响

设计并合成了含有不同生色团以及不同官能度的环氧树脂基偶氮高分子 ,系统研究了偶氮生色团的种类和官能度对光栅形成速率的影响规律 .实验结果表明 ,偶氮苯对位是羧基的聚合物的光栅形成速率明显快于偶氮苯对位是硝基的聚合物 ,光栅形成速率随偶氮生色团官能度的增加而加快 .这两类聚合物都可以形成规整的可擦式表面起伏光栅     

Test of variational transition state theory with multidimensional tunneling contributions against experimental kinetic isotope effects for the CHnD4−n + OH→P (n=0, 4) reactions

 Variational transition state theory including tunneling corrections (as implemented in Polyrate 8.7) and using multilevel energy calculations at the MCCM-CCSD(T)-1sc level for the CH₄ + OH reaction and at the MCCM-CCSD(T)-2m level for the CD₄ + OH process, reproduces very well the experimental rate constants. However, no single methodology was found that reproduces equally well the experimental rate constants for both title reactions. Received: 24 March 2002 / Accepted: 11 April 2002 / Published online: 4 July 2002