Identifying the viscoelastic properties of soft matter from the indentation response of a hard film-soft substrate system

The indentation technique is widely used in measuring the mechanical properties of soft matter at the microscale or nanoscale,but still faces challenges by these unique properties as well as the consequent strong surface adhesion, including the strong nonlinear effect, unclear judgment of the contact point, difficulties in estimating the contact area, and the risk of the indenter piercing the sample. Here we propose a two-step method to solve these problems: lay a hard film on a soft matter, and obtain the viscoelastic properties of this soft matter through the indentation response of this composite structure. We first establish a theoretical indentation model of the hard film-soft substrate system based on the theory of plates, elastic-viscoelastic correspondence principle and Boltzmann superposition principle. To verify the correctness of this method, we measure the mechanical properties of the methyl vinyl silicone rubber(MVSR) covered by a Cu nanofilm. Finally, we test the effectiveness and error sensitivity of this method with the finite element method(FEM). The results show that our method can accurately measure the mechanical properties of soft matter, while effectively circumventing the problems of the traditional indentation technique.     

Time-dependent Ginzburg–Landau equations for multi-gap superconductors

We numerically solve the time-dependent Ginzburg–Landau equations for two-gap superconductors using the finite-element technique. The real-time simulation shows that at low magnetic field, the vortices in small-size samples tend to form clusters or other disorder structures. When the sample size is large, stripes appear in the pattern. These results are in good agreement with the previous experimental observations of the intriguing anomalous vortex pattern, providing a reliable theoretical basis for the future applications of multi-gap superconductors.     

CPL冷凝单管融化过程的双倒易边界元分析

1引言CPL（毛细泵两相流回路）能传输较高的热负荷，而且不需要循环泵、阀门等运动部件，重量轻可靠性好；在飞行器热控制方面有很好的应用前景[1]。CPL在恶劣的空间环境中运行，需要防止工作介质出现冷冻，为此，我们已经用解析[2]和数值的方法[3]进行了初步的分析，得到了一些可供工程设计参考应用的结果。另外，在恶劣的空间环境中，如果出现冻结，需要融化起动，热管的安全设计需要研究它的融化特性，以确保热管在空间能正常运行。双倒易边界元方法用Laplace基本解[4]，通过对一类偏微分方程两侧进行转化，将它全部转化为纯边界积分…     

固体力学有限元体系的结构拓扑变化理论

本文是文[1]的继续.文[1]提出了杆件系统的结构拓扑变化理论和拓扑变化法本文将这一理论和方法推进到连续体有限元体系;且在此基础上揭示出有限元体系的一个新性质,称为基本位移之梯度的正交性定理,从而给出一套设计敏度的显式表达式,可直接用于计算.     

Local and Parallel Finite Element Algorithms for Eigenvalue Problems

Abstract Some new local and parallel finite element algorithms are proposed and analyzed in this paper foreigenvalue problems.With these algorithms, the solution of an eigenvalue problem on a fine grid is reduced tothe solution of an eigenvalue problem on a relatively coarse grid together with solutions of some linear algebraicsystems on fine grid by using some local and parallel procedure.A theoretical tool for analyzing these algorithmsis some local error estimate that is also obtained in this paper for finite element approximations of eigenvectorson general shape-regular grids.     

Multilevel preconditioners for a quadrature Galerkin solution of a biharmonic problem

Efficient multilevel preconditioners are developed and analyzed for the quadrature finite element Galerkin approximation of the biharmonic Dirichlet problem. The quadrature scheme is formulated using the Bogner–Fox–Schmit rectangular element and the product two‐point Gaussian quadrature. The proposed additive and multiplicative preconditioners are uniformly spectrally equivalent to the operator of the quadrature scheme. The preconditioners are implemented by optimal algorithms, and they are used to accelerate convergence of the preconditioned conjugate gradient method. Numerical results are presented demonstrating efficiency of the preconditioners. © 2005 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 2006     

电感耦合等离子体原子发射光谱法测定中药方剂煎煮液中的微量元素

本文采用HNO3－H2O2对中药方剂煎煮液进行处理，拟定了电感耦合等离子体原子发射光谱法同时测定试样中12个微量元素的方法，选择了仪器的最佳工作条件，考察了基本效应的影响。在选定条件下，12个微量元素的检出限为0．10－5．0ng/g，相对标准偏差为0.10%-9.5%(n=10),加标回收率为85％－103％。该方法简单、快速，已用于大量样品的检测，分析结果满意。     

Finite Element Solution of Conical Diffraction Problems

This paper is devoted to the numerical study of diffraction by periodic structures of plane waves under oblique incidence. For this situation Maxwell's equations can be reduced to a system of two Helmholtz equations in R ² coupled via quasiperiodic transmission conditions on the piecewise smooth interfaces between different materials. The numerical analysis is based on a strongly elliptic variational formulation of the differential problem in a bounded periodic cell involving nonlocal boundary operators. We obtain existence and uniqueness results for discrete solutions and provide the corresponding error analysis.     

CFD在燃煤细粒子凝聚过程中的应用

燃煤产生的细粒子富集了大量的有毒痕量元素,对大气环境和人类健康造成严重危害。本文针对燃煤细粒子的形成过程,在计算流体力学(CFD)的基础上,结合气溶胶动力学理论,模拟了烟气中细粒子在圆柱形流场中由于碰撞而凝聚的过程,并通过计算结果分析细粒子颗粒特征参量(速度、质量、直径和颗粒数目)随流场的变化趋势,为深入研究燃煤细粒子的形成演化机理提供理论基础。     

Numerical Prediction of the Strain State of Thermoset Matrix/Mineral Filler Composite Plates

The numerical prediction of the fields of inelastic strains (the linear invariant of the tensor of inelastic strains) in thermoset polyester/marble filler composite plates is discussed. A uniformly distributed load is applied to the plates, which lie on a steel base. The strain fields are predicted by means of the boundary element method by using creep test data for the composites and the polyester matrix itself. Identical creep tests were performed for two ages of the materials (1 month and 13 years), which allowed evaluating the aging effect. The study is carried out in two stages. At the first stage, the application of the generalized Maxwell-Gurevich equation to the thermoset matrix/mineral filler composite is demonstrated. The model parameters determined from the experimental creep data is used for the second stage, where the state of inelastic strains in the plates is predicted by applying the boundary element method. The influence of composite formulation (filler content) and physical aging of the polyester matrix on the state of inelastic strains in the plates is shown.__________Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 41, No. 2, pp. 145–156, March–April, 2005.