ARL—3520AES电感耦合等离子体发射光谱仪疑难故障的分析与排除

介绍了在瑞士ＡＲＬ公司生产的ＩＣＰ－３５２０ＡＥＳ型电感耦合等离子体原子发射光谱仪上存在的一种疑难故障的分析与排除过程，对同类型仪器的故障分析有借鉴作用。     

FRS-XRSA与SAXS研究硬弹性聚丙烯的结晶度、取向与超结构Ⅲ应变与回复

应用全倒易空间Ｘ 射线散射理论分析（ＦＲＳ ＸＲＳＡ）与ＳＡＸＳ研究了ＨＥＰＰ在应变（ε）与回复（Ｒ）过程中结晶、取向与超结构的变化．结果指出，ε可以诱发结晶，但当ε≥３０％后，结晶度（ＸＷＣ）趋于不变：ε可以导致晶粒破碎；ε与Ｒ对取向分布与平均取向基本上无影响，这符合片晶平行分离模型，而非叶簧弯曲模型；发现，在ε≤３０％时，层状片晶的分离为主要过程，而当ε＞３０％后，则分离的片晶会发生断层滑移；ε可以诱发微孔，类似地当ε＞２０％，微孔尺寸亦趋不变．从凝聚态结构阐明了ＨＥＰＰ在ε Ｒ过程中不同阶段的结构变化     

磷钼杂多化合物脱硫热力学可行性与硫磺生成机理研究

长期以来杂多化合物一直被用作特定反应的催化剂 ,尚无直接利用其氧化还原性能进行污染物治理研究的先例 [1] .由于磷和钼在我国均为丰产元素 ,相应的杂多化合物又具有稳定的化学性能 ,寻找其新的应用领域无疑具有特别重要的意义 .本文对与此相关的脱硫热力学可行性与硫磺生成机理问题进行研究 ,以期为应用开发奠定理论基础 .1　实验部分1 .1　仪器和试剂　 31 4型硫离子选择电极 (江苏电分析仪器厂 ) ;DSC- 7型微分量热仪 (美国 Perkin-Elmer公司 ) ;Finber 1 0 0 0型能谱分析仪 (配置 Pioneer KYKY2 80 0型扫描电镜 ) ;UJ33a型电位…     

傅里叶变换技术在紫外可见光谱区的应用

本文评述了傅里叶变换在紫外可见光谱区的应用，探讨了傅里叶变换在紫外可见光谱学以及信号处理两方面的内容。详细介绍了傅里叶变换在紫外可见区遇到的问题、主要优点和发展前景。     

A NOVEL EOR POLYMER (Ⅱ)——INVESTIGATION ON IN-SITU GELATION OF SMRF SYSTEM IN BEREA CORE

In-situ gelation of aqueous sulfomethylated resorcinol formaldehyde (SMRF) system inBerea core has been investigated. Two sets of displacement experiments were conducted with thissystem (containing 5% NaCl, 0. 036% CaCl_2. 2H_2O). The brine permeabilities of the coreswere reduced significantly from about 600 to 0.1 md. The in-situ gelation in Berea core occurreda little bit earlier than gelation anticipated from bulk test in the experiments. The gel time waseasier to control at initial pH between 6 and 8. During injection of SMRF system, the apparentviscosity was less than 1 mPa·s at 41℃.     

Affinity enrichment of plasma membrane for proteomics analysis

Proteomics analysis of plasma membranes from cells exposed to different extracellular environments is potentially a powerful approach for the identification of membrane-associated proteins responding to these environments. Preparation of high concentration plasma membrane fractions with low contamination from cellular organelles is essential for such studies. Here, we describe an affinity enrichment method, which combines cell surface biotinylation with affinity enrichment by immobilized streptavidin beads, for the isolation of plasma membranes. This method results in a 400-fold enrichment of plasma membrane relative to endoplasmic reticulum, a major contaminant in standard plasma membrane preparations, and dramatically reduces contamination from other cellular organelles. The biotinylation reaction did not interfere with ligand-dependent activation of receptor tyrosine kinases or G-protein coupled receptors, suggesting cell-surface signal transduction machinery remains functional. Membrane fractions prepared by this method should provide excellent starting materials for membrane proteomics analysis such as studies of dynamic trafficking and regulation of signaling molecules or identification of disease-specific membrane markers.     

实验室废液的回收及效果评价——以“铬废液回收及评价”为例

This paper introduces an experiment about waste liquid recovery and effect evaluation in laboratory. Through this experiment, the basic operations of crystal preparation, chemical analysis and instrumental analysis are further consolidated. At the same time, it allows students to experience a series of possible problems of condition selection and control in the process of waste liquid treatment. We hope to improve the students' ability to analyze and solve problems, enhance their interest in learning, and strengthen their humanistic education.     

Setting up of recovery profiles: A tool to perform the compliance with recovery requirements for residue analysis

The use of the recovery term has presented some confusion in Analytical Chemistry. Recent IUPAC recommendations propose to distinguish between two terms: recovery or recovery factor, ℜ, and apparent recovery, ℜ*. Apparent recovery includes recovery factor and a new recovery term proposed in this paper, named calibration recovery, ℜ^C, which depends of the type of systematic error due to the matrix effect (constant and/or proportional) and is related to the applied calibration methodology. This paper highlights the dependence of the calibration recovery on the sample analyte concentration and, for extension, of the apparent recovery, defines the recovery profile, and makes evident the need to determine a “fit for purpose” analyte concentration interval to comply with a regulated recovery requirements. An approach to estimate the calibration recovery and its associated uncertainty in relation to the above-mentioned dependence is presented. The usefulness of the proposed methodology has been shown in the quantification of a pesticide by GC-ECD for assessing dermal exposure.     

Enhancing chemical analysis with signal derivatization using simple available software packages

Derivative techniques for analytical signal processing are useful for solving some noise and signal resolution problems in various fields of study such as titrimetry, spectrophotometry, chromatography and electrochemistry. The broad use of these techniques, however, is often limited by costly inflexible built-in software packages in commercial analytical instruments. We propose here the application of commercial simple software packages such as Microsoft® Excel and Microcal Origin for signal smoothing and fitting, and for obtaining derivative analytical signals in batch and flow-based analyses, including potentiometric titration, spectrophotometry, chromatography, voltammetry and sequential injection analysis (SIA). The worldwide (especially Excel) software packages are easy-to-use for less experienced users and have also capabilities for advanced users, and therefore employing such packages can result in expansion of useful derivative techniques. We demonstrate application of the available package-aided derivative capabilities for enhancing some chemical analyses, including potentiometric acid–base titration, Bradford assay of protein, chromatographic separation of ajmaline and reserpine and anodic stripping voltammetry of copper. The derivative signals from smoothed and fitted curves offer better accuracy and precision, even for non-resolving peaks and tailing peaks. In some cases, the optimization of experimental conditions is not further required, which can lead to fast method development.     

Instantaneous strain recovery elasticity and endothermic heat change in nylon-6 monofilaments and silicone rubbers

The instantaneous elastic moduli for a nylon-6 monofilament were derived on strain recoveries right after creep, stress relaxation, and rapid elongation,E _c ,E _s andE _e , respectively. It was found that during strain recoveryE _s (>E _e ) andE _e increase monotonically with increasing load,m ₁, on the sample. The extrapolated value of E_s atm ₁=0 g is almost equal to Young's modulus, 4.06 GPa. The value ofE _c also increased with increasingm ₁, and atm ₁=600 g (1.93 t cm^–2) reached about 14 GPa. The endothermic heat change right after creep, stress relaxation or rapid elongation,Q, was negligibly small. For comparison,E _s ,E _c andQ were also investigated for silicone rubber. It was found thatE _s (53.8 M Pa at the draw ratioD=1.2) decreased abruptly atD=1.3. In the range ofD=1.4–1.9,E _s was only 22.6 MPa. In the case of stress relaxation,Q increased with increasingD from 4 J mol^–1 (atD=1.2) to 56 J mol^–1 (atD=1.9). FurthermoreE _c (5.58 MPa atm ₁=133.8 g (429.4 kg cm^–2)) increased gradually with increasing m₁ and attained 16.6 MPa atm ₁=548.4 g (1.76 t cm^–2). In the case of creep,Q was in the range of 0–11.5 J mol^–1 and larger when larger loads,m ₂ were removed during the later stages of creep.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThe author wishes to thank Mr. Keizi Igarashi and Mr. Tetsuya Yasui for helping in the experiments.