Stress-Strain Behavior of Shape Memory Polymers by 1WE Method: Application to Tecoflex®

Thermomechanical cycles including programming, cooling, unloading and heating to trigger the 1WE were examined for a shape memory polymer (SMP), Tecoflex® (TFX EG-72D). Cycles were performed at 60°C with 50% and 225% strains and the recovery time of 10 min. Strains evolving with time were estimated during the thermomechanical treatments for the total 44 cycles using 50% strains and the total 50 cycles using 225% strains. Recovery ratios for 50% strains and 225% were also estimated. It turns out that programming, cooling, unloading and heating to trigger the 1WE causes an increase of irreversible strain and is associated with a corresponding decrease of the intensity of the 1WE in particular during the first thermomechanical cycles. In parallel scanning electron microscopic study using secondary electron imaging shows a very slight wavy surface structure evolved during cycling.     

Monocyclic rod-type liquid crystals; 2,5-dialkanoyloxytropones and 5-alkanoyloxy-2-alkoxytropones

Two kinds of monocyclic troponoid mesogens, 2,5-dialkanoyloxytropones (4) and 5-alkanoyloxy2-alkoxytropones (5), were prepared. The former showed monotropic smectic A phases and the virtual isotropic liquid-smectic A transitions of the latter were determined by extrapolation of results in a binary phase diagram. Comparing the mesogenic properties between the tropones 4 and the 2-alkanoyloxy-5-alkoxytropones (1), the alkanoyloxy group at C-5 enhances both the melting points and the transition temperatures of the smectic A phases. From the comparison between 5 and 1, the alkanoyloxy group at C-2 lowers the melting points.     

Do some chemotaxis-growth models possess Lyapunov functionals?

In spirit of a result by W. Alt from 1980 we give some sufficient criteria that guarantee the existence of Lyapunov functionals for parabolic cross-diffusion models including chemotaxis-growth models with non-diffusive chemotactic signals (resp. with non-diffusive memory).     

Physically cross‐linked networks of POSS‐capped poly(acrylate amide)s: Synthesis,morphologies, and shape memory behavior

In this work, we synthesized a novel organic–inorganic semitelechelic polymer from polyhedral oligomeric silsesquioxane (POSS) and poly(acrylate amide) (PAA) via reversible addition‐fragmentation chain transfer (RAFT) polymerization. The organic–inorganic semitelechelic polymers have been characterized by means of nuclear magnetic resonance spectroscopy, thermal gravimetric analysis, and dynamic mechanical thermal analysis. It was found that capping POSS groups to the single ends of PAA chains caused a series of significant changes in the morphologies and thermomechanical properties of the polymer. The organic–inorganic semitelechelics were microphase‐separated; the POSS microdomains were formed via the POSS–POSS interactions. In a selective solvent (e.g., methanol), the organic–inorganic semitelechelics can be self‐assembled into the micelle‐like nanoobjects. Compared to plain PAA, the POSS‐capped PAAs significantly displayed improved surface hydrophobicity as evidenced by the measurements of static contact angles and surface atomic force microscopy. More importantly, the organic–inorganic semitelechelics displayed typical shape memory properties, which was in marked contrast to plain PAA. The shape memory behavior is attributable to the formation of the physically cross‐linked networks from the combination of the POSS–POSS interactions with the intermolecular hydrogen‐bonding interactions in the organic–inorganic semitelechelics. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 587–600     

Polymer chain diffusion in polymer blends: A theoretical interpretation based on a memory function formalism

The diffusion of polymer chains in miscible polymer blends with large dynamic asymmetry—those where the two blend components display very different segmental mobility—is not well understood yet. In the extreme case of the blend system of poly(ethylene oxide) (PEO) and poly(methyl methacrylate)(PMMA), the diffusion coefficient of PEO chains in the blend can change by more than five orders of magnitude while the segmental time scale hardly changes with respect to that of pure PEO. This behavior is not observed in blend systems with small or moderate dynamic asymmetry as, for instance, polyisoprene/poly(vinyl ethylene) blends. These two very different behaviors can be understood and quantitatively explained in a unified way in the framework of a memory function formalism, which takes into account the effect of the collective dynamics on the chain dynamics of a tagged chain. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1239–1245     

Nonvolatile write‐once read‐many‐times memory behaviors of polyimides containing tetraphenyl fluorene core and the pendant triphenylamine or carbazole moieties

To better understand the structure–property relationships, two novel aromatic diamines containing tetraphenyl fluorene (TPF) moiety through triphenylamine (TPA) unit and carbazole (Cz) unit modification are designed and synthesized, respectively. Four thermally stable and excellent solubility polyimides are prepared and characterized. The excellent film‐formation ability and thin film stability are investigated by X‐ray diffraction (XRD) and atom force microscopy (AFM) measurements, respectively. The memory devices are fabricated, PIs films with low water uptakes sandwiched between indium‐tin oxide (ITO) ground electrode and Al top electrode, and exhibit nonvolatile write‐once read‐many‐times (WORM) memory behaviors with low threshold voltages, due to increasing the retention time through regulating the energy level. The current conduction mechanisms of all devices are linearly fitted by theoretical conduction model. Molecular simulations are used to demonstrate switching mechanism and the memory effects. The experimental results provide a sight for the design‐adjustable switching voltage of memory devices. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1630–1644     

Shape memory induced structural evolution of high performance copolyimides

In this work, two kinds of high temperature shape memory copolyimides were prepared and the shape memory cycles induced structural evolution of macromolecular chains was investigated in detail. The glass transition temperature (T_g) of poly(benzoxazole‐co‐imide) (PI1) and poly(benzimidazole‐co‐imide) (PI2) are 280 °C and 355 °C, respectively. The results show that PI1 could keep stable macromolecular chain structure under shape memory cycles and exhibit outstanding shape memory performance (R_f > 98%, R_r > 97%) under different stretch condition. Whereas, shape memory cycles induced orientation with more ordered macromolecular chains packing is formed for PI2 after several thermal mechanical cycles, which strongly affect physical crosslinking points, thermal mechanical properties as well as shape memory behaviors. The study on macroscopic property and microscopic structure evolution will promote a better understanding of the shape memory effect of polyimides and accelerate development of high performance polyimides for shape memory applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3858–3867     

Synthesis and design of polyurethane and its nanocomposites derived from canola-castor oil: Mechanical,thermal and shape memory properties

The recent global pandemic and its tremendous effect on the price fluctuations of crude oil illustrates the side effects of petroleum dependency more evident than ever. Over the past decades, both academic and industrial communities spared endless efforts in order to replace petroleum-based materials with bio-derived resources. In the current study, a series of shape memory polymer composites (SMPC's) was synthesized from epoxidized vegetable oils, namely canola oil and castor oil fatty acids (COFA's) as a 100% bio-based polyol and isophorone diisocyanate (IPDI) as an isocyanate using a solvent/catalyst-free method in order to eventuate polyurethanes (PU's). Thereafter, graphene oxide (GO) nanoplatelets were synthesized and embedded in the neat PU in order to overcome the thermomechanical drawbacks of the neat matrix. The chemical structure of the synthesized components, as well as the dispersion and distribution levels of the nanoparticles, was characterized. In the following, thermal and mechanical properties as well as shape memory behavior of the specimens were comprehensively investigated. Likewise, the thermal conductivity was determined. This study proves that synthesized PU's based on vegetable oil polyols, including graphene nanoparticles, exhibit proper thermal and mechanical properties, which make them stand as a potential candidate to compete with traditional petroleum-based SMPC's.     

Controlled quantum teleportation of an unknown single-qutrit state in noisy channels with memory

This paper proposes a three-dimensional(3 D) controlled quantum teleportation scheme for an unknown single-qutrit state. The scheme is first introduced in an ideal environment, and its detailed implementation is described via the transformation of the quantum system. Four types of 3 D-Pauli-like noise corresponding to Weyl operators are created by Kraus operators: trit-flip, t-phase-flip, trit-phase-flip, and t-depolarizing. Then, this scheme is analyzed in terms of four types of noisy channel with memory. For each type of noise, the average fidelity is calculated as a function of memory and noise parameters, which is afterwards compared with classical fidelity. The results demonstrate that for trit-flip and t-depolarizing noises, memory will increase the average fidelity regardless of the noise parameter. However, for t-phase-flip and trit-phaseflip noises, memory may become ineffective in increasing the average fidelity above a certain noise threshold.     

Global existence and bounds for blow‐up time in a class of nonlinear pseudo‐parabolic equations with a memory term

In this article, we consider the initial boundary value problem for a class of nonlinear pseudo‐parabolic equations with a memory term: Under suitable assumptions, we obtain the local and global existence of the solution by Galerkin method. We prove finite‐time blow‐up of the solution for initial data at arbitrary energy level and obtain upper bounds for blow‐up time by using the concavity method. In addition, by means of differential inequality technique, we obtain a lower bound for blow‐up time of the solution if blow‐up occurs.