Investigating the effect of nanolayered silicates on blend segmental dynamics and minor component relaxation behavior in poly(ethylene oxide)/poly(methyl methacrylate) miscible blends

Polymer–silicate nanocomposites based on poly (ethylene oxide), PEO, poly(methyl methacrylate), PMMA, and sodium montmorillonite clay were fabricated and characterized to investigate the effect of nanolayered silicates on segmental dynamics of PEO/PMMA blends. X‐ray results indicate the formation of an exfoliated morphology in the nanocomposites. At low silicate contents, an enhancement in segmental dynamics of blend nanocomposites and also PEO, minor component in blend, is observed at temperature region below blend glass transition. This result can be attributed to the improvement of the confinement effect of rigid PMMA matrix on the PEO chains by introducing a low amount of layered silicates. On the other hand, at high silicate contents, an enhancement in segmental dynamics of blend nanocomposites and PEO is observed at temperature region above blend glass transition. This behavior could be interpreted based on the reduction of monomeric friction between two polymer components, which can facilitate segmental motions of blend components in nanocomposite systems. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Role of adsorbed chain rigidity in reinforcement of polymer nanocomposites

The thermomechanical behavior of polymer nanocomposites is mostly governed by interfacial properties which rely on particle–polymer interactions, particle loading, and dispersion state. We recently showed that poly(methyl methacrylate) (PMMA) adsorbed nanoparticles in poly(ethylene oxide) (PEO) matrices displayed an unusual thermal stiffening response. The molecular origin of this unique stiffening behavior resulted from the enhanced PEO mobility within glassy PMMA chains adsorbed on nanoparticles. In addition, dynamic asymmetry and chemical heterogeneities existing in the interfacial layers around particles were shown to improve the reinforcement of composites as a result of good interchain mixing. Here, the role of chain rigidity in this interfacially controlled reinforcement in PEO composites is investigated. We show that particles adsorbed with less rigid polymers improve the mechanical properties of composites. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 9–14     

Dynamics of a poly(ethylene oxide) tracer in a poly(methyl methacrylate) matrix: remarkable decoupling of local and global motions

The tracer diffusion coefficient of unentangled poly(ethylene oxide) (PEO, M=1000 gmol) in a matrix of poly(methyl methacrylate) (PMMA, M=10 000 gmol) has been measured over a temperature range from 125 to 220 degrees C with forced Rayleigh scattering. The dynamic viscosities of blends of two different high molecular weight PEO tracers (M=440 000 and 900 000 gmol) in the same PMMA matrix were also measured at temperatures ranging from 160 to 220 degrees C; failure of time-temperature superposition was observed for these systems. The monomeric friction factors for the PEO tracers were extracted from the diffusion coefficients and the rheological relaxation times using the Rouse model. The friction factors determined by diffusion and rheology were in good agreement, even though the molecular weights of the tracers differed by about three orders of magnitude. The PEO monomeric friction factors were compared with literature data for PEO segmental relaxation times measured directly with NMR. The monomeric friction factors of the PEO tracer in the PMMA matrix were found to be from two to six orders of magnitude greater than anticipated based on direct measurements of segmental dynamics. Additionally, the PEO tracer terminal dynamics are a much stronger function of temperature than the corresponding PEO segmental dynamics. These results indicate that the fastest PEO Rouse mode, inferred from diffusion and rheology, is completely separated from the bond reorientation of PEO detected by NMR. This result is unlike other blend systems in which global and local motions have been compared.     

Preparation and properties of the biodegradable graded blend of poly(L‐lactic acid) and poly(ethylene oxide)

We prepared biodegradable poly(ethylene oxide) (PEO)/poly(L ‐lactic acid) (PLLA) graded blends by the dissolution–diffusion process, and discussed the biodegradability and tensile strength of the graded blends by comparing isotropic blend and PLLA only. All the graded blends were degraded more largely than the PLLA only and isotropic blend (PEO: 37.5 wt %), which had the same content as the total content of those graded blends. The graded blend having most excellent wide compositional gradient was degraded most largely with the enzyme. Thus, graded structure of the blends promoted their biodegradabilities large. It was considered that the dissolution of PEO with water increased the surface area attacked by the enzyme, while PEO caught PLLA oligomers to promote the biodegradation of PLLA. Then, the biodegradabilities of the graded blends were suppressed by the increasing crystallinity of PLLA. Furthermore, the strengths of all the graded blends were larger than those of the isotropic blend. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2972–2981, 2007     

Enhanced ionic conductivity in PEO/PMMA glassy miscible blends: Role of nano‐confinement of minority component chains

AC impedance spectroscopy was used to investigate the ionic conductivity of solution cast poly(ethylene oxide) (PEO)/poly(methyl methacrylate) (PMMA) blends doped with lithium perchlorate. At low PEO contents (below overlap weight fraction w^*), ionic conductivities are almost low. This could be due to nearly distant PEO chains in blend, which means ion transportation cannot be performed adequately. However, at weight fractions well above w^*, a significant increase in ionic conductivity was observed. This enhanced ionic conductivity mimics the PEO segmental relaxation in rigid PMMA matrix, which can be attributed to the accelerated motions of confined PEO chains in PMMA matrix. At PEO content higher than 20 wt % the conductivity measured at room temperature drops due to crystallization of PEO. However by increasing temperature to temperatures well above the melting point of PEO, a sudden increase of conductivity was observed which was attributed to phase transition from crystalline to amorphous state. The results indicate that some PEO/PMMA blends with well enough PEO content, which are structurally solid, can be considered as an interesting candidate for usage as solid‐state electrolytes in Lithium batteries. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 2065–2071, 2010     

Anomalous penetrant diffusion as a probe of the local structure in a blend of poly(ethylene oxide) and poly(methyl methacrylate)

Pulse field gradient (PFG) NMR measurements have been made to study the diffusion of diethyl ether in blends of poly(ethylene oxide) (PEO) and poly(methyl methacrylate) (PMMA). The blends have 10–30 wt % PEO, a composition range within which these materials are amorphous glasses. The diffusion of diethyl ether through the blends is quite rapid, with diffusion constants in the range of 10^?7 to 10^?8 cm²/s. In PFG NMR experiments, the apparent diffusion constant depends on the timescale over which diffusion is observed. The values decrease to a plateau as the time increases, this being the signature of tortuous diffusion. Tortuous diffusion is usually observed in heterogeneous systems in which there are regions that support fast diffusion and regions that support slow diffusion or act as barriers. In these blends, PEO is known to undergo rapid segmental motion typical of a rubbery state well below the glass transition, whereas the segmental motion of PMMA is slower by many orders of magnitude. Mobile PEO provides a pathway for the diffusion of structurally similar diethyl ether, whereas solid‐like PMMA acts as a barrier. The size of the domains can be estimated either from a lattice model or from equations for tortuous diffusion. Micrometer sizes are indicated that are unexpectedly large, given the size of the polymer chains and the size of the concentration fluctuations, both of which are thought to be in the tens of nanometers. The lattice model and the equations for tortuous diffusion assume a random dispersion of impenetrable or less penetrable objects. This may not be the appropriate morphology for the diffusion pathway. Recently, large sizes have been indicated by PFG NMR experiments, in which a penetrant is thought to diffuse in a curvilinear fashion. In these blends, the pathway for diethyl ether is along the PEO backbone. A plot of the logarithm of the mean‐square displacement versus the logarithm of time has a slope of about 0.6, close to the value of 0.5 for pure curvilinear diffusion. Exponents with values in this range can also be associated with diffusion in a fractal space, which, in this situation, still consists of mobile PEO. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1053–1067, 2004     

Permeability of N2, Ar,He, O2, and CO2 through as‐extruded amorphous and biaxially oriented polyester films: Dependence on chain mobility

For as‐extruded amorphous and biaxially orientated polyester films based on poly(ethylene terephthalate), poly(ethylene naphthalate), and copolymers containing poly(ethylene terephthalate) and poly(ethylene naphthalate) moieties, permeability, diffusion, and solubility coefficients are interpreted in terms of chain mobility. The influence of polymer morphology is determined by comparison of the data for as‐extruded amorphous sheets and materials produced with different biaxial draw ratios. The crystallinities of the samples were assessed using differential scanning calorimetry and density measurements. Changes in mobility at a molecular level were investigated using dielectric spectroscopy and dynamic mechanical thermal analysis. The study, in conjunction with our earlier work, leads to the conclusion that the key to understanding differences in gas transport is the difference in local chain motions rather than in free volume. This was illustrated by the permeability results for He, Ar, N₂, and O₂ in the range of polyesters. However, the permeability of CO₂ was found to require alternative explanations because of polymer–penetrant interactions. For biaxially oriented samples, the differences in diffusivity are not only due to differences in local chain motions, but also additional constraints resulting from the increased crystallinity and chain rigidity—which also act to hinder segmental mobility. The effectiveness of the reduction in permeability in the biaxially oriented films is consequently determined by the ability of the polymer chains to effectively align and form crystalline structures. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2916–2929, 2004     

Deuterium solid echo line shape study of poly(ethylene oxide) dynamics in a blend with poly(methyl methacrylate)

Deuterium solid echo line shapes were measured on deuterated poly(ethylene oxide) (d₄PEO) in a blend with protonated poly(methyl methacrylate) to characterize chain dynamics of this component in the blend. Line shapes were observed as a function of temperature from 183 to 243 K and echo delay times from 10 to 100 μs on a blend containing 20 wt % d₄PEO. The line shapes and the associated relative intensities were quantitatively interpreted in terms of segmental motion and libration. The results of the interpretation are compared to an earlier study of deuterium spin‐lattice relaxation times over the temperature range of 313 to 413 K. A combined interpretation of both sets of data is developed based on bimodal distribution of correlation times that are separated by about 2 orders of magnitude in time. The faster mode is 30% of the correlation function with a stretched exponent near one while the slower mode is characterized by an exponent of 0.5. The source of the bimodal character is not revealed by the line shape and relaxation data but is consistent with the presence of two glass transition temperatures in this miscible blend and anomalous translational diffusion of diethyl ether through the blend. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2433–2444, 2005     

Thermorheological complexity of poly(methyl methacrylate)/poly(vinylidene fluoride) miscible polymer blend: Terminal and segmental levels

Oscillatory shear rheometry data for a miscible blend of 20 wt % poly(vinylidene fluoride) (PVDF) in poly(methyl methacrylate) (PMMA) shows breakdown of time–temperature superposition for this blend. A comparison between glass transition temperature which PMMA chains sense in the blend and effective glass transition temperature of this component indicates that, the Lodge–McLeish model can describe terminal dynamics of PMMA. In addition, terminal dynamics of PVDF chains in the blend is similar to that of its pure state in agreement with the mentioned model. At segmental level, dynamic mechanical thermal analysis of four wholly amorphous blends suggests that cooperativity of molecular motions decreases upon addition of 30 and 40 wt % PVDF to PMMA. This behavior has been confirmed via calculation of degree of fragility which presumably is attributed to strong tendency of PVDF chains to self‐association rather than inter‐association with PMMA chains according to the FTIR results. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2860–2870, 2007     

Local and chain dynamics in miscible polymer blends: A Monte Carlo simulation study

Local chain structure and local environment play an important role in the dynamics of polymer chains in miscible blends. In general, the friction coefficients that describe the segmental dynamics of the two components in a blend differ from each other and from those of the pure melts. In this work, we investigate polymer blend dynamics with Monte Carlo simulations of a generalized bond fluctuation model, where differences in the interaction energies between nonbonded nearest neighbors distinguish the two components of a blend. Simulations employing only local moves and respecting a no bond crossing condition were carried out for blends with a range of compositions, densities, and chain lengths. The blends investigated here have long time dynamics in the crossover region between Rouse and entangled behavior. In order to investigate the scaling of the self-diffusion coefficients, characteristic chain lengths N(c) are calculated from the packing length of the chains. These are combined with a local mobility mu determined from the acceptance rate and the effective bond length to yield characteristic self-diffusion coefficients D(c)=muN(c). We find that the data for both melts and blends collapse onto a common line in a graph of reduced diffusion coefficients DD(c) as a function of reduced chain length NN(c). The composition dependence of dynamic properties is investigated in detail for melts and blends with chains of length N=20 at three different densities. For these blends, we calculate friction coefficients from the local mobilities and consider their composition and pressure dependence. The friction coefficients determined in this way show many of the characteristics observed in experiments on miscible blends.     

Studies of photooxidative degradation of poly(vinyl chloride)/poly(ethylene oxide) blends

The photooxidative degradation of blends (in a full range of compositions) of amorphous poly(vinyl chloride) (PVC) with semicrystalline poly(ethylene oxide) (PEO) in the form of thin films is investigated using absorption spectroscopy (UV–visible and Fourier transform infrared) and atomic force microscopy (AFM). The amount of insoluble gel formed as a result of photocrosslinking is estimated gravimetrically. It is found that the PVC/PEO blendsí susceptibility to photooxidative degradation differs from that pure of the components and depends on the blend composition and morphology. Photoreactions such as degradation and oxidation are accelerated whereas dehydrochlorination is retarded in blends. The photocrosslinking efficiency in PVC/PEO blends is higher than in PVC; moreover, PEO is also involved in this process. AFM images showing the lamellar structure of semicrystalline PEO in the blend lead to the conclusion that the presence of PVC does not disturb the crystallization process of PEO. The changes induced by UV irradiation allow the observation of more of the distinct PEO crystallites. This is probably caused by recrystallization of short, more mobile chains in degraded PEO or by partial removal of the less stable amorphous phase from the film surface. These results confirm previous information on the miscibility of PVC with PEO. The mechanism of the interactions between the components and the blend photodegradation are discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 585–602, 2004     

Two calorimetric glass transitions do not necessarily indicate immiscibility: The case of PEO/PMMA

Differential scanning calorimetry has been used to examine blends of a poly(ethylene oxide) (PEO), M_n = 300 g/mol, and a poly(methylmethacrylate) (PMMA), M_n = 10,000 g/mol, across the complete composition range. The relatively low molar mass of the PEO minimizes interference from crystallization. In the midrange of composition, ～25–70% PEO, two broad, but distinct, glass transitions are resolved. These are interpreted as distinct glass transitions of the two components, as anticipated by the self‐concentration model of Lodge and McLeish. The composition dependence of the observed transitions is well described by the self‐concentration approach, using lengthscales of approximately two‐thirds of the Kuhn length. The results are compared with previous measurements on PEO/PMMA blends and other miscible systems. The principal, general conclusion is that one should actually expect two glass transitions in a miscible polymer blend or polymer solution; the rule of thumb that two transitions indicate immiscibility is incorrect. Furthermore, attempts to rationalize two transitions on the basis of incomplete segmental mixing, or other unspecified “nanoheterogeneity,” may not be justified in many cases. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 756–763, 2006     

Computer simulation studies of the miscibility of poly(3-hydroxybutyrate)-based blends

By means of the molecular dynamics simulation method, the miscibility of poly(3-hydroxybutyrate)/polyethylene (PHB/PE) blend has been investigated. Two glass transition temperatures of the PHB/PE are found by scrutinizing its volume-temperature curve, and this result is qualitatively in agreement with the experimental results. To further analyze the miscibility of poly(3-hydroxybutyrate)-based blends, the Flory-Huggins parameters of PHB/PE, poly(3-hydroxybutyrate)/poly(ethylene oxide) (PHB/PEO), poly(ethylene oxide)/polyethylene (PEO/PE) have been calculated via a Monte Carlo scheme, and the morphology of the PHB/PEO and the PHB/PE blend has been simulated using dissipative particle dynamics method. The time evolution of dividing interface for PHB/PEO/PE blend shows a dynamic phase separation process. All these results indicate that PHB and PEO tend to mix together, whereas PE aggregates to form PE-rich domains in the PHB/PE and PHB/PEO/PE blends.     

Neutron scattering investigation of a diluted blend of poly(ethylene oxide) in polyethersulfone

By using quasielastic neutron scattering (QENS) with isotopic labeling we have investigated the component dynamics in a miscible blend of polyethersulfone (PES) and poly(ethylene oxide) (PEO) with 75% content in weight of PES. Due to the large difference in the glass-transition temperatures, T(g)'s, of the two polymers (T(g) (PEO) approximately equal to 220 K, T(g) (PES) approximately equal to 382 K) the dynamic asymmetry in the system dramatically increases when approaching the average T(g) of the blend, . For the fast (PEO) component, this leads to a behavior which hints a crossover from typical glass-forming liquidlike dynamics at high temperatures to confined dynamics close to induced by the freezing of the segmental motions of the slow PES. The features of the confined PEO motion observed by QENS are similar to those of the secondary gamma-relaxation detected for pure (semicrystalline) PEO. A neutron diffraction study of the short-range order of the homopolymers and the blend suggests that this coincidence could be due to similarities in the intermolecular packing of PEO and PES polymers.     

Interchain coupled chain dynamics of poly(ethylene oxide) in blends with poly(methyl methacrylate): coupling model analysis

Quasielastic neutron scattering and molecular dynamics simulation data from poly(ethylene oxide) (PEO)/poly(methyl methacrylate) (PMMA) blends found that for short times the self-dynamics of PEO chain follows the Rouse model, but at longer times past t(c) = 1-2 ns it becomes slower and departs from the Rouse model in dependences on time, momentum transfer, and temperature. To explain the anomalies, others had proposed the random Rouse model (RRM) in which each monomer has different mobility taken from a broad log-normal distribution. Despite the success of the RRM, Diddens et al. [Eur. Phys. Lett. 95, 56003 (2011)] extracted the distribution of friction coefficients from the MD simulations of a PEO/PMMA blend and found that the distribution is much narrower than expected from the RRM. We propose a simpler alternative explanation of the data by utilizing alone the observed crossover of PEO chain dynamics at t(c). The present problem is just a special case of a general property of relaxation in interacting systems, which is the crossover from independent relaxation to coupled many-body relaxation at some t(c) determined by the interaction potential and intermolecular coupling/constraints. The generality is brought out vividly by pointing out that the crossover also had been observed by neutron scattering from entangled chains relaxation in monodisperse homopolymers, and from the segmental α-relaxation of PEO in blends with PMMA. The properties of all the relaxation processes in connection with the crossover are similar, despite the length scales of the relaxation in these systems are widely different.     

Synthesis and characterization of a vinyl‐terminated benzoxazine monomer and its blends with poly(ethylene oxide)

A vinyl‐terminated benzoxazine (VB‐a), which could be polymerized through ring‐opening polymerization, was synthesized through the Mannich condensation of bisphenol A, formaldehyde, and allylamine. This VB‐a monomer was then subjected to blending with poly(ethylene oxide) (PEO), followed by thermal curing, to form poly(VB‐a)/PEO blends. The specific interactions, miscibility, morphology, and thermal properties of these blends were investigated with Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry, dynamic mechanical analysis (DMA), and scanning electron microscopy (SEM). Before curing, we found that PEO was miscible with VB‐a, as evidenced by the existence of a single composition‐dependent glass transition temperature (T_g) for each composition. The FTIR spectra revealed the presence of hydrogen‐bonding interactions between the hydroxyl groups of poly(VB‐a) and the ether groups of PEO. Indeed, the ring‐opening reaction and subsequent polymerization of the benzoxazine were facilitated significantly by the presence of PEO. After curing, DMA results indicated that the 50/50 poly(VB‐a)/PEO blend exhibited two values of T_g: one broad peak appeared in the lower temperature region, whereas the other (at ca. 327 °C, in the higher temperature region) was higher than that of pristine poly(VB‐a) (301 °C). The presence of two glass transitions in the blend suggested that this blend system was only partially miscible. Moreover, SEM micrographs indicated that the poly(VB‐a)/PEO blends were heterogeneous. The volume fraction of PEO in the blends had a strong effect on the morphology. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 644–653, 2007     

Novel biodegradable poly(butylene succinate)/poly(ethylene oxide) blend film with compositional and spherulite‐size gradients

Biodegradable poly(butylene succinate) (PBS)/poly(ethylene oxide) (PEO) polymer blend film with compositional gradient in the film thickness direction was prepared using a method of interdiffusion across the interface between the PBS and PEO layers at a temperature above the melting points of both the component polymers. The miscibility between PBS and PEO was confirmed by observation of the glass transition temperature by differential scanning calorimetry. The compositional gradient structure of PBS/PEO was characterized by microscopic mapping measurement of Fourier transform infrared spectra and dynamic mechanical thermal analysis. Furthermore, a new method for confirming the crystalline/crystalline compositional gradient structure through observing the crystallization behavior by POM (polarized optical microscopy) was put forward. A continuous gradient of the spherulite size along the film thickness direction was succeessfully generated in the PBS/PEO blend film. The compositional gradient blend was found to have significantly improved physical properties that cannot be realized for pure PBS, pure PEO, and even their homogeneous miscible blend system. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 368–377, 2005     

Crystallization kinetics of poly(ethylene oxide) confined in semicrystalline poly(vinylidene) fluoride

Polymer blends based on poly(vinylidene fluoride) (PVDF) and poly(ethylene oxide) (PEO) have been prepared to analyze the crystallization kinetics of poly(ethylene oxide) confined in semicrystalline PVDF with different ratios of both polymers. Both blend components were dissolved in a common solvent, dimethyl formamide. Blend films were obtained by casting from the solution at 70 °C. Thus, PVDF crystals are formed by crystallization from the solution while PEO (which is in the liquid state during the whole process) is confined between PVDF crystallites. The kinetics of crystallization of the confined PEO phase was studied by isothermal and nonisothermal experiments. Fitting of Avrami model to the experimental DSC traces allows a quantitative comparison of the influence of the PVDF/PEO ratio in the blend on the crystallization behavior. The effect of melting and further recrystallization of the PVDF matrix on PEO confinement is also studied. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 588–597     

The combination of fluctuation-assisted crystallization and interface-assisted crystallization in a crystalline/crystalline blend of poly(ethylene oxide) and poly(ε-caprolactone)

The nucleation and crystallization of poly(ethylene oxide) (PEO) and poly(ε-caprolactone) (PCL) in the PEO/PCL blends have been investigated by means of optical microscopy (OM) and differential scanning calorimetry (DSC). During the isothermal or nonisothermal crystallization process, when the adjacent PEO is in the molten state, PCL nucleation preferentially occurs at the PEO and PCL interface; after the crystallization of the adjacent PEO, much more PCL nuclei form on the surface of the PEO crystal. However, PEO crystallizes normally and no interfacial nucleation occurs in the blend. The concentration fluctuation caused by liquid–liquid phase separation (LLPS) induces the motion of PEO and PCL chains through interdiffusion and possible orientation of chain segments. The oriented PEO chain segments can assist PCL nucleation, and the heterogeneous nucleation ability of PEO increases with the orientation of PEO chains. Oriented PCL chain segments have no heterogeneous nucleation ability on PEO. It is postulated that the interfacial nucleation of PCL in the PEO/PCL blend follows the combination of “fluctuation-assisted crystallization” and “interface-assisted crystallization” mechanisms.

Effect of cation exchange capacity on the structure and dynamics of poly(ethylene oxide) in Li+ montmorillonite nanocomposites

Molecular dynamics computer simulations are used to study the structure and dynamics of 1-nm wide films of poly(ethylene oxide) (PEO) confined between mica-type layered silicates of different cation exchange capacities (CEC). The simulation setup mimics experimental systems formed by intercalation of PEO in montmorillonite alumino-silicates with varied inherent charges. It is shown that the presence and population of lithium has a significant influence on the behavior of the system, in addition to the confinement-induced effects caused by the extreme spatial restriction. The structural features of the confined PEO are strongly altered with the number of Li⁺, which determines the polymer/inorganic interactions. The combination of the nanoconfinement and the presence of lithium preclude regular ordered arrangements of PEO, similar to those observed in the bulk unconfined polymer. The segmental dynamics of PEO in confinement are also greatly influenced by the presence of lithium, because of the strong interaction between Li⁺ and the oxygen of the PEO backbone. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3460–3477, 2005