2-(2-喹啉偶氮)-5-二甲氨基苯胺光度法测定铜

在pH=4.0的磷酸盐缓冲介质中,CTMAB存在下,2-(2-喹啉偶氮)-5-二甲氨基苯胺(QADMAA)与铜反应生成2:1稳定络合物,络合物λmax=580nm,ε=1.14×105L·mol-1·cm-1.铜含量在0.01-0.6μg/mL内符合比耳定律,方法用于环境样品中铜的测定,结果令人满意.     

Al-pillared clays supported rare earths and palladium catalysts for deep oxidation of low concentration of benzene

Al-pillared clays supported rare earths (RE/Al-PILC) are prepared and used as supports of palladium catalysts for deep oxidation of low concentrations of benzene (130-160 ppm). The supports and catalysts are characterized by X-ray powder diffraction (XRD), FT-IR, BET, transmission electron microscopy (TEM) and temperature-programmed reduction (H₂-TPR). The results show that Al-pillaring results in a strong increase in the basal spacing (d_0 0 1) from about 1.2 to 1.8 nm, and an increase in the BET surface area from 63.6 (±3.2) to 238.8 (±11.9) m²/g. Activity tests of deep oxidation of low concentration benzene show catalysts supported on Al-PILC and RE/Al-PILC are obviously more active than that on raw clay. Pd/6% Ce/Al-PILC, in particular, can catalyze the complete oxidation of low concentration benzene at a temperature as low as about 290 °C.     

Surface structures formed by individual adsorption and coadsorption of Mn and Bi on Cu(0 0 1), studied by LEED

We have studied the individual adsorption of Mn and Bi, and their coadsorption on Cu(0 0 1) by low-energy electron diffraction (LEED). For Mn, we have determined the c(2 × 2) structure formed at 300 K, whose structure had been determined by several methods. We reconfirmed by a tensor LEED analysis that it is a substitutional structure and that a previously reported large corrugation (0.30 Å) between substitutional Mn and remaining surface Cu atoms coincides perfectly with the present value. In the individual adsorption of Bi, we have found a c(4 × 2) structure, which is formed by cooling below ∼250 K a surface prepared by Bi deposition of ∼0.25 ML coverage at 300 K where streaky half-order LEED spots appear. The c(4 × 2) structure has been determined by the tensor LEED analysis at 130 K and it is a substitutional structure. In the coadsorption, we found a c(6 × 4) structure, which has been determined by the tensor LEED analysis. It is very similar to the previously determined structure of the c(6 × 4) formed by coadsorption of Mg and Bi, and embedded MnBi₄ clusters are arranged in the top Cu layer instead of MgBi₄. Large lateral displacements of Bi atoms in the c(6 × 4)-(Mn + Bi) suggest that the Mn atoms undergo the size-enhancement caused by their large magnetic moment.     

Germanium growth on Br-terminated Si(1 0 0)

The consequences of Ge deposition on Br-terminated Si(1 0 0) were studied with scanning tunneling microscopy at ambient temperature after annealing at 650 K. One monolayer of Br was sufficient to prevent the formation of Ge huts beyond the critical thickness of 3 ML. This is possible because Br acts as a surfactant whose presence lowered the diffusivity of Ge adatoms. Hindered mobility was manifest at low coverage through the formation of short Ge chains. Further deposition resulted in the extension and connection of the Ge chains and gave rise to the buildup of incomplete layers. The deposition of 7 ML of Ge resulted in a rough surface characterized by irregularly shaped clusters. A short 800 K anneal desorbed the Br and allowed Ge atoms to reorganize into the more energetically favorable “hut” structures produced by conventional Ge overlayer growth on Si(1 0 0).     

A nilpotent Roth theorem

Let T and S be invertible measure preserving transformations of a probability measure space (X, ℬ, μ). We prove that if the group generated by T and S is nilpotent, then exists in L ²-norm for any u, v∈L ^∞(X, ℬ, μ). We also show that for A∈ℬ with μ(A)>0 one has . By the way of contrast, we bring examples showing that if measure preserving transformations T, S generate a solvable group, then (i) the above limits do not have to exist; (ii) the double recurrence property fails, that is, for some A∈ℬ, μ(A)>0, one may have μ(A∩T _-n A∩S ^{- n} A)=0 for all n∈ℕ. Finally, we show that when T and S generate a nilpotent group of class ≤c, in L ²(X) for all u, v∈L ^∞(X) if and only if T×S is ergodic on X×X and the group generated by T ^-1 S, T ^-2 S ²,..., T ^-c S ^c acts ergodically on X. Oblatum 19-V-2000 & 5-VII-2001?Published online: 12 October 2001     

On a conjecture of Cox and Katz

This note shows that a certain toric quotient of the quintic Calabi-Yau threefold in provides a counterexample to a recent conjecture of Cox and Katz concerning nef cones of toric hypersurfaces. Received: 8 February 2001; in final form: 17 September 2001 / Published online: 1 February 2002     

Sharp estimates in terms of moduli of smoothness for compound cubature rules

Summary In 1980 Dahmen-DeVore-Scherer introduced a modulus of continuity which turns out to reflect invariance properties of compound cubature rules effectively. Accordingly, sharp error bounds are derived, the existence of relevant counterexamples being a consequence of a quantitative resonance principle, established previously.     

SN方法粒子输运计算程序自动建模关键技术问题研究

在充分调研和分析SN方法粒子输运计算程序自动建模方法的基础上，对建模过程中的模型文件格式识别、属性编辑、空腔处理及自动划分离散网格等关键技术问题进行了研究，并提出了合理可行的解决方法。通过对SNAM程序建模部分功能测试，验证了这些方法的正确性和有效性。This paper presents two approaches to enhance the geometry modeling ability of SN particle transport simulation codes and focus on the key issues that lie in the processing from CAD model to SN code geometry model, e.g. CAD file format support, void modeling, mesh generation and model-editing. SNAM （SN Automatic Modeling system） has been developed as an interface code between commercial CAD software and SN particle transport simmulation codes. The testing results have shown that the algorithm and implementation used in SNAM are efficient and capable of all the necessary processing from CAD model to SN geometry model.     

A comparative study of the structure and crystallization of bulk metallic amorphous rod Pr60Ni30Al10 and melt-spun metallic amorphous ribbon Al87Ni10Pr3

Pr-based bulk metallic amorphous （BMA） rods （Pr60Ni30Al10） and Al-based amorphous ribbons （Al87Ni10Pr3） have been prepared by using copper mould casting and single roller melt-spun techniques, respectively. Thermal parameters deduced from differential scanning calorimeter （DSC） indicate that the glass-forming ability （GFA） of Pr60Ni30Al10 BMA rod is far higher than that of Al87Ni10Pr3 ribbon. A comparative study about the differences in structure between the two kinds of glass-forming alloys, superheated viscosity and crystallization are also made. Compared with the amorphous alloy Al87Ni10Pr3, the BMA alloy Pr60Ni30Al10 shows high thermal stability and large viscosity, small diffusivity at the same superheated temperatures. The results of x-Ray diffraction （XRD） and transmission electron microscope （TEM） show the pronounced difference in structure between the two amorphous alloys. Together with crystallization results, the main structure compositions of the amorphous samples are confirmed. It seems that the higher the GFA, the more topological type clusters in the Pr-Ni-Al amorphous alloys, the GFAs of the present glass-forming alloys are closely related to their structures.     

Electron spin resonance of diluted solid solutions of MnO2 in Y2O3

Electron spin resonance spectra of Mn²⁺ in diluted solid solutions of MnO₂ in Y₂O₃ have been studied at room temperature for Mn concentrations between 0.20 and 2.00 mol%. Isolated Mn²⁺ ions in sites with two different symmetries were observed, as well as Mn²⁺ ions coupled by the exchange interaction. The relative concentration of isolated to coupled Mn²⁺ ions decreases with increasing manganese concentration. The results are consistent with the assumption that the manganese ions occupy preferentially the C₂ symmetry sites. A theoretical calculation based on this model yields an effective range of the exchange interaction between Mn²⁺ ions of 0.53 nm, of the same order as that of Mn²⁺ ions in CaO.