On the lattice structure of the set of stable matchings for a many-to-one model ∗

For the many-to-one matching model with firms having substitutable and q-separable preferences we propose two very natural binary operations that together with the unanimous partial ordering of the workers endow the set of stable matchings with a lattice structure. We also exhibit examples in which, under this restricted domain of firms' preferences, the classical binary operations may not even be matching     

酸性电解水过程中氧析出反应的机理及铱基催化剂的研究进展北大核心CSCD

可持续能源的迅速发展,使绿色清洁的氢能源成为热点。质子交换膜(PEM)水电解是一项很有前途的技术,可高效生产高纯度氢气。IrO_(2)作为质子交换膜(PEM)水电解槽阳极氧析出反应(OER)的商用电催化剂,既能在强酸性、高强度腐蚀条件下保持稳定,又表现出优异的催化性能。然而,由于Ir的稀缺性和昂贵的价格,提高Ir基催化剂的OER活性,开发低Ir催化剂就显得至关重要。对其反应机理的认知是当前的研究热点之一,也是设计优异的OER催化剂的关键所在。因此,首先从OER机理出发,对目前被广泛认可的吸附物逸出机理(AEM)和晶格氧逸出机理(LOER)两种反应机理进行了研究。随后,根据所提出的这两种机理,介绍了OER催化剂设计的基本准则,即调控Ir基催化剂的电子结构,改善反应中间物种在催化活性位点上的吸附能,从而提高OER催化活性。并从催化剂的结构设计、形貌控制、载体材料3个方面简单概述了最近OER催化剂的研究进展。最后,在已有研究的基础上,提出了目前OER催化剂面临的困难与挑战,这为以后相关的研究指明了方向。     

Steering spatially separated dual sites on nano-TiO2 through SMSI and lattice matching for robust photocatalytic hydrogen evolution

Spatial isolation of different functional sites at the nanoscale in multifunctional catalysts for steering reaction sequence and paths remains a major challenge. Herein, we reported the spatial separation of dual-site Au and RuO₂ on the nanosurface of TiO₂ (Au/TiO₂/RuO₂) through the strong metal-support interaction (SMSI) and the lattice matching (LM) for robust photocatalytic hydrogen evolution. The SMSI between Au and TiO₂ induced the encapsulation of Au nanoparticles by an impermeable TiO_x overlayer, which can function as a physical separation barrier to the permeation of the second precursor. The LM between RuO₂ and rutile-TiO₂ can increase the stability of RuO₂/TiO₂ interface and thus prevent the aggregation of dual-site Au and RuO₂ in the calcination process of removing TiO_x overlayer of Au. The photocatalytic hydrogen production is used as a model reaction to evaluate the performance of spatially separated dual-site Au/TiO₂/RuO₂ catalysts. The rate of hydrogen production of the Au/TiO₂/RuO₂ is as high as 84 μmol h⁻¹ g⁻¹ under solar light irradiation without sacrificial agents, which is 2.5 times higher than the reference Au/TiO₂ and non-separated Au/RuO₂/TiO₂ samples. Systematic characterizations verify that the spatially separated dual-site Au and RuO₂ on the nanosurface of TiO₂ can effectively separate the photo-generated carriers and lower the height of the Schottky barrier, respectively, under UV and visible light irradiation. This study provides new inspiration for the precise construction of different sites in multifunctional catalysts.     

受限于两平行板间的对称星形共聚物Am Bm熔体相行为的格子自洽场理论研究

采用格子自洽场理论计算研究了受限于2个平行板间的对称星形共聚物AmBm(m=1,2,3,4,5)熔体形成的层状相结构.在给定的相互作用下(χNAB不变,χ为Flory-Huggins相互作用参数,NAB=(N?1)/m为单个聚合物分子中一对AB臂的总链节数目),针对平行板间距为体相周期的情况,系统考察了共聚物链长N和单个聚合物分子中A(或B)臂数目m对受限层结构细节及层取向的影响.由计算结果,当N或NAB不变时,受限层的归一化界面宽度随m的增大而减小.受限板为中性时,垂直层结构的单链自由能比平行层结构的低.随着板对共聚物中一种嵌段的选择作用Λ的增大,体系发生垂直层到平行层的转变,该转变为一阶相变.当m不变时,N越小,上述转变出现在越大的Λ值处,体系越容易保持垂直层结构.并且N越小,层状结构周期越小.当N或NAB不变时,m越大体系越容易保持垂直层结构.总之,星形共聚物的链长越短、臂数越多时,垂直层稳定的Λ区间越大、层状结构的界面宽度越小.这些结论可以指导刻蚀应用中对体系参数的选择.     

Multiscale characterization and constitutive parameters identification of polyamide (PA12) processed via selective laser sintering

This study is focused on multiscale characterization and constitutive parameters identification of selectively laser sintered PA12 specimens. The process parameters and change in crystallinity due to 3D printing were identified via differential scanning calorimetry (DSC). Tension, compression, shear, flexural and fracture tests performed on samples fabricated, both in 0° and 90° directions reveal that the tensile toughness of samples printed in 0° orientation, outperform samples printed in 90° orientation by an average of 24%. Cryogenically fractured samples were analyzed via SEM and micro-computed tomography to analyze 2D/3D defects and correlate the microstructure with macroscopic properties. The constitutive parameters for a strain-rate and temperature-dependent Three Network (TN) material model were identified using the measured mechanical properties. Furthermore, mechanical response of micro-architected Kelvin lattice structure was analyzed by Finite Element Method employing the TN constitutive model and the predictions were corroborated with measurements.     

常见客体分子对笼型水合物晶格常数的影响

Natural gas hydrates are considered as ideal alternative energy resources for the future, and the relevant basic and applied research has become more attractive in recent years. The influence of guest molecules on the hydrate crystal lattice parameters is of great significances to the understanding of hydrate structural characteristics, hydrate formation/decomposition mechanisms, and phase stability behaviors. In this study, we test a series of artificial hydrate samples containing different guest molecules (e.g. methane, ethane, propane, iso-butane, carbon dioxide, tetrahydrofuran, methane + 2, 2-dimethylbutane, and methane + methyl cyclohexane) by a low-temperature powder X-ray diffraction (PXRD). Results show that PXRD effectively elucidates structural characteristics of the natural gas hydrate samples, including crystal lattice parameters and structure types. The relationships between guest molecule sizes and crystal lattice parameters reveal that different guest molecules have different controlling behaviors on the hydrate types and crystal lattice constants. First, a positive correlation between the lattice constants and the van der Waals diameters of homologous hydrocarbon gases was observed in the single-guest-component hydrates. Small hydrocarbon homologous gases, such as methane and ethane, tended to form sI hydrates, whereas relatively larger molecules, such as propane and iso-butane, generated sⅡ hydrates. The hydrate crystal lattice constants increased with increasing guest molecule size. The types of hydrates composed of oxygen-containing guest molecules (such as CO₂ and THF) were also controlled by the van der Waals diameters. However, no positive correlation between the lattice constants and the van der Waals diameters of guest molecules in hydrocarbon hydrates was observed for CO₂ hydrate and THF hydrate, probably due to the special interactions between the guest oxygen atoms and hydrate "cages". Furthermore, the influences of the macromolecules and auxiliary small molecules on the lengths of the different crystal axes of the sH hydrates showed inverse trends. Compared to the methane + 2, 2-dimethylbutane hydrate sample, the length of the a-axis direction of the methane + methyl cyclohexane hydrate sample was slightly smaller, whereas the length of the c-axis direction was slightly longer. The crystal a-axis length of the sH hydrate sample formed with nitrogen molecules was slightly longer, whereas the c-axis was shorter than that of the methane + 2, 2-dimethylbutane hydrate sample at the same temperature.     

基于FeWOx/SiO2载氧体的甲烷化学链部分氧化反应

甲烷具有价格低廉且储量丰富的优点,因此将甲烷转化为合成气(一种H2:CO为2的混合物),从而进一步合成有价值的化学品和液体燃料引起了人们的极大关注.化学链甲烷部分氧化(CLPOM)技术能避免甲烷与空气直接接触而引起爆炸的危险,可以降低后续对合成气与氮气分离操作所带来的费用,因此日益受到关注.CLOPM过程主要分为两步:第一步,CH4被载氧体所携带的氧部分氧化,载氧体被还原;第二步,利用氧化剂(例如空气)将被还原的载氧体再氧化恢复.因此,载氧体在CLOPM过程中起到至关重要的作用.载氧体的选择主要存在两个问题:(1)甲烷被活化所产生含碳产物的能力与晶格氧的给氧能力不匹配所带来的严重碳沉积;(2)金属离子间扩散速率不匹配而造成载氧体在氧化还原过程中结构的不可逆变化.基于上述两个问题,本文设计了FeWOx/SiO2载氧体用于CLPOM.与未改性的WO3/SiO2载氧体相比,甲烷的转化率和合成气的收率都有显著提高.FeWOx/SiO2在900℃、1 atm反应条件下表现出62%的甲烷转化率、93%的CO气相选择性、94%的H2选择性和2.4的H2/CO比值,同时在50个循环中表现出优异的催化活性和稳定性.本工作利用CH4脉冲反应研究了FeWOx/SiO2的甲烷表面反应过程;采用CH4-TPR和H2-TPR相结合探究了甲烷活化速率与晶格氧扩散速率之间的关系;通过XPS和XRD对FeWOx/SiO2在氧化还原过程中的结构稳定性进行了探讨.综合上述实验结果,对FeWOx/SiO2应用于CLPOM的反应机理进行了阐述.H2-TPR结果表明,在FeWOx/SiO2中,相较于Fe2O3/SiO2,Fe-O的活性受到抑制,使其更倾向于与甲烷发生部分氧化反应;相较于WO3/SiO2,W-O的活性得到明显提升,因此更多的晶格氧可以参与到部分氧化反应中来氧化积碳,从而使合成气收率大幅度提升.从CH4-TPR结果可以看出,对于FeWOx/SiO2,CO与H2的生成温度最接近,意味着晶格氧的传输速率较快并且能够与甲烷活化产生含碳中间物种的速率相匹配,将其及时氧化生成CO,避免由于积碳造成的催化剂失活.结合XPS和XRD结果可以得出,在甲烷还原过程中,FeWOx经历一步还原形成Fe-W合金,由于其间存在强相互作用,因而抑制了还原过程中催化剂相分离现象的发生.同时,根据铁钨离子在空气条件下扩散速率的公式计算可以得出,其相近的离子氧化速率也保证了在氧化过程中催化剂结构的稳定性.本工作为进一步构建用于甲烷化学链部分氧化制合成气的复合金属氧化物载氧体提供了研究思路.     

Effect of material selection and background impurity on interface property and resulted CIP-GMR performance

In this paper, we investigated the effect of background base pressure, wafer-transferring time between process modules, and stack layer material selection on the current-in-plane giant magneto-resistive (CIP-GMR) interface properties and the resulted CIP-GMR performance. Experimental results showed that seed layer/AFM interface, AFM/pinned layer (PL) interface, pinned layer/Ru interface, and reference layer (RL)/Cu spacer interface are among the most critical ones for a CIP-GMR device. By reducing the background impurity level (water moisture and oxygen), optimizing the wafer process flow sequence, and careful stack-layer material selection, such critical interfaces in a CIP-GMR device can be preserved. Consequently, a much robust GMR performance control can be achieved.     

Incorporation of smooth spherical bodies in the Lattice Boltzmann method

A method to simulate bodies suspended in a Lattice Boltzmann solvent is proposed. It is based on a generalized reaction force that enforces no-slip boundary conditions at the fluid–body interface as the limiting case of an iterative procedure. A smooth version of the Heaviside function allows to treat spherical particles of arbitrary size and produces smooth hydrodynamic forces as particles move in the continuum. Numerical tests demonstrate the accuracy of the method in reproducing the hydrodynamic field around a single particle and the fluid-mediated forces between pairs of particles. The drag force experienced by a particle moving in a straight channel and at various Reynolds numbers is studied as a non-trivial testcase.