Synthesis of 3β,20S-dihydroxydammar-24-en-12-one 3,20-di-O-β-D-glucopyranoside (chikusetsusaponin-LT8), a glycoside from Panax japonicus

A method for preparative production of 3β,20S-dihydroxydammar-24-en-12-one 3,20-di-O-β-D-glucopyranoside (1), a glycoside from Panax japonicus, chikusetsusaponin-LT₈ was developed. Chemical transformation of betulafolientriol, a component of Betula leaves extract, produced the 12-keto-20S-protopanaxadiol (3β,20S-dihydroxydammar-24-en-12-one) (2), exhaustive glycosylation of which by 2,3,4,6-tetra-O-acetyl-α-D-glucopyranosylbromide (3) under Koenigs—Knorr reaction conditions with subsequent removal of protecting groups formed 3β,20S-dihydroxydammar-24-en-12-one 3,20-di-O-β-D-glucopyranoside (1). The principal glycosylation product was 3β,20S-dihydroxydammar-24-en-12-one 3-O-β-D-glucopyranoside if equimolar amounts of (2) and (3) were used. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 1, pp. 44–48, January–February, 2006.     

Transition state geometry in radical abstraction reactions: comparison of interatomic distances in the intersecting parabolas and Morse curves models with quantum-chemical calculations

Interatomic distances in the transition state were estimated for the reactions of radical abstraction: H^· + H₂, H^· + HCl, H^· + CH₄, N^·H₂ + NH₃, HO^· + H₂O, HO₂ ^· + HOOH, and C^·H₃ + SiH₄. The calculation was performed by the quantum-chemical density functional method or coupled clusters method (QCH), as well as by the methods of intersecting parabolas (IPM) and Morse curves (IMM), using experimental data (activation energies and reaction enthalpies). The results of the latter two methods are close to the quantum-chemical calculation and differ only by the increment a: r(IPM or IMM) = a + r(QCH), where a = –4.5·10^–12 m for IPM and a = +1.9·10^–12 m for IMM.     

Application of symplectic algorithms to QCT calculation:H+H_2 system

The basic theory of symplectic algorithm was introduced. A comparison between Runge-Kutta method and symplectic integration method was preformed in the simulation of the long time behavior of H + H2 system on BKMP potential energy surface. Our results reveal a dis-sipative behavior in the integral of ordinary differential equation by the fourth order Runge-Kutta method, which causes incorrect simulation results in QCT calculations. However, when the symplectic integration method is applied, the dissipative behavior is not found in the same system. When the initial state is the same, the energy deviation of fourth order symplectic integral method is almost one percent of that of fourth order Runge-Kutta method in a 60000-step simulation, and that of sixth order symplectic integral method is much less. These results show that the symplectic integral methods are always the better choice in the integral calculation of the long time behavior in maintaining energy conservation.     

B2O3/TiO2-ZrO2催化环己酮肟气相Beckmann重排反应研究Ⅱ.焙烧温度的影响

采用XRD、FT-IR和NH3-TPD等方法，研究了载体预焙烧温度和催化剂活化焙烧温度对B2O3/TIO2-ZRO2催化剂的结构、酸性和催化环己酮肟气相Beckmann重排反应性能的影响。结果表明，在383-773K范围内，载体预烧温度对催化剂性能的影响不大，但经973K高温预焙烧后，由于生成了ZrTiO4晶相，使其与H3BO3的相互作用减弱，从而导致催化剂的酸性和反应性能降低，提高催化剂活化焙烧温度，有利于B2O3与TiO2-ZrO2的相互作用，生成更多的Beckmann重排反应所需的中等强度酸中心，使催化剂的活性和选择性提高；但活化焙烧温度过高，会使催化剂中大量的B2O3晶粒析出，引起酸中心数量和催化活性的明显下降。     

原油饱和烃指纹的内标法分析

采用内标法建立了原油中正构烷烃、生物标志物(甾、萜烷类)的分析方法。确定了样品前处理方法和组分定性定量方法。讨论了柱层析分离能力。结果表明,所有饱和烃组分均流入第一部分流出液F1中,分离能力较为满意。对48种甾、萜烷类生物标志物组分以及姥鲛烷、植烷和正构烷烃等进行了定性确认,定性化合物数量多,信息量大,易于据此进行可靠的油指纹分析鉴别。32个正构烷烃组分相对标准差为1.2%～7.4%;45个生物标志物组分相对标准偏差为2.5%～9.2%。分析精密度较好,满足油指纹鉴别需要。正构烷烃回收率为73%～116%;生物标志物为84%～106%;回收率结果较为满意。正构烷烃方法检出限为7.0μg/g;生物标志物为0.65μg/g,满足原油样品分析要求。通过本方法对自不同和相同平台的原油样品进行饱和烃浓度分析,并采用浓度数据进行鉴别,结果与实际情况相符。     

沉淀法合成纳米晶长余辉材料Y2O2S∶Eu3+，Ti

The long-lasting phosphorescent materials, yttrium oxysulfides doped by Eu and Ti, were systhesized by coprecipitation with their subsequent thermal decomposition in the presence of sulphur. The products were characterized by XRD, TEM, phosphorescent spectra, and thermoluminescence. The XRD results indicate that the lowest synthesis temperature is 700 ℃. From the TEM, the average diameter of particles was in the range of 60～120 nm, and augmented with the increase of temperature. The materials under UV excitation presented well afterglow from the transition of ⁵D_0,1 → ⁷F_J of Eu³⁺, and the persistent time was about 2 h. The long-lasting afterglow mechanism was discussed, too.     

Structure, Stability and Vibrational Spectra of LaC_5~n(n=-1,0,+1) Clusters

用密度泛含方法研究了ＬａＣ５ｎ（ｎ＝－１，０，＋１）分子簇的结构和稳定性及振动光谱，对这个六原子体系提出了三种可能构型，点群结构为Ｃ２ｖ对称性．第一个构型为Ｌａ接在弯曲的Ｃ５链上，第二个是Ｌａ通过二个键与Ｃ５环相连第三个是Ｌａ通过一个键与Ｃ５环相连；结果表明，第一个构型即当Ｌａ接在弯曲的Ｃ５链上时能量最低．振动光谱分析指出，当ｎ＝－１时，第二个构型为局域极小值；当ｎ＝＋１时，第一个和第二个构型为局域极小值；对ｎ＝０，局域极小值没有找到．     

数均聚合度计算的教学方法

总结毛者提出的线型缩聚中当量系数的新定义及引入缩聚体系单体平均官能度的新方法，本文总结出了一套讲授数均聚合度计算问题的简单方法。     

复合Fe2O3纳米粒子的高分子微球的结构表征

近年来，复合有机、无机粒子的高分子微球及其特殊性质越来越引起人们的兴趣与关注［1］．获得有机、无机复合微球的方法很多，如在无机粒子存在下的乳液或无皂乳液聚会[2，3]，通过可聚合的表面活性剂在粒子表面形成胶囊化层[4]以及共沉淀法等[5]．这些无机粒子包括氧化钛、氧化铁、氧化铝及氧化硅等．Haga等[6]增发现包覆在聚合物粒子中的CdS与其本体的光电性质不同；单分散的聚合物微球可以在基片上被组装成二维乃至三维有序的结构[7]．这为信息存储、立体印刷等领域提供了新途径．因此，将无机粒子与聚合物复合成为功能化粒子是一项有…     

聚酰胺酸及其接枝衍生物的三阶非线性光学性能研究

设计合成了苯代三聚氰胺与均苯四酸二酐缩聚物, 及不同侧链的p-π共轭缩聚物, 并以量子化学PM3/CIS方法为基础, 利用完全态求和(SOS)公式, 对不同侧链取代的聚酰胺酸的分子进行了几何构型优化, 并计算了其三阶非线性光学系数γ. 研究了不同侧链对聚合物三阶非线性性能的影响. 这些结果对合成具有优良加工性能的三阶非线性光学材料是有一定的指导作用.