磁流体动力学在航空工程中的应用与展望

介绍了磁流体动力学在航空工程中的主要应用方式,主要包括:磁流体冲压组合发动机、磁流体涡轮组合发动机、燃烧室后磁流体发电、表面磁流体发电、磁流体加速风洞、磁流体推力矢量、进气道大尺寸磁流体流动控制、边界层分离流动控制、边界层转捩控制、飞行器头部热流控制等;探讨了磁流体技术在应用中存在的关键科学与技术问题,对导电流体的产生、磁流体实验设备与实验技术、多场耦合机理及数值模拟方法等进行了分析;最后对磁流体技术在航空工程上的应用与发展进行了总结与展望.     

分裂导线自阻尼振动特性研究

为了掌握线路的振动状态,确定线路抗振能力,保证线路安全,需要明确架空输电导线的风致振动响应．本文针对江苏境内某特高压工程LGJ-630/45型导线,建立其振动控制能量平衡方程,编制了Fortran程序以高效准确地求解该超越方程,计算分析了单导线及四种分裂导线微风振动状态下的振动及耗能特性．结果表明,单导线在风振平衡点处的双振幅最大值在最低频率上,约为导线直径的两倍;四种分裂导线风振平衡点处的幅值在15Hz附近达到最大值;导线单位长度功耗在60Hz附近达到最高,功耗能力在较低频域(10Hz~20Hz)上较弱,在较高频域(30Hz~80Hz)较强;导线分裂数越大,分裂导线的振幅越小,八分裂导线的防振消振效果相对最好;四种分裂导线在在10Hz~20Hz频域振动幅值大而单位功耗水平低,因此10Hz~20Hz频段是分裂导线的危险频段,防振措施应该针对这一频段设置．研究方法与成果为LGJ-630/45导线的抗振设计提供了科学依据．     

幂律流体在多孔介质中径向渗流的分形模型

基于分形理论及毛细管模型,本文研究了非牛顿幂律流体在各向同性多孔介质中径向流动问题,推导了幂律流体径向有效渗透率的分形解析表达式．研究结果表明,幂律流体径向有效无量纲渗透率模型和Chang and Yortsos’s模型吻合很好;同时还得出幂律流体径向有效渗透率随孔隙率、幂指数的增加而增加,随迂曲度分形维数的增加而减少．     

基于hp自适应伪谱法的组合动力可重复使用运载器轨迹优化

针对传统化学火箭难以重复使用、发射成本高的问题,提出了一种水平起飞/降落的新一代可重复使用运载器飞行方案,并对其动力模式设计和上升段轨迹优化方法等关键技术进行深入研究。设计了一种涡轮\冲压发动机结合火箭\冲压发动机的组合动力模式,建立了发动机推力与高度、马赫数等变量间的耦合模型,根据动力形式将上升段轨迹分为两段并采用全局搜索法确定动力切换的最佳时机。根据分段结果,分别以燃料最省和终端速度最大为指标,利用hp自适应伪谱法对两段进行轨迹优化设计。该算法基于双层策略求解最优控制问题,兼备伪谱法和有限元法的优点,与打靶法、伪谱法和间接法相比,初值更易选取,收敛速度更快。     

A 12.1-W SESAM mode-locked Yb:YAG thin disk laser

Pumped by a 940 nm fiber-coupled diode laser, a passively mode-locked Yb:YAG thin disk oscillator was demonstrated with a semiconductor saturable absorber mirror(SESAM). 12.1 W mode-locked pulses were obtained with pulse duration of 698 fs at the repetition rate of 57.43 MHz. Measurement showed that the beam quality was close to the diffraction limit.     

Improved performance of near UV light-emitting diodes with a composition-graded p-AlGaN irregular sawtooth electron-blocking layer

We investigate the performances of the near-ultraviolet(about 350 nm-360 nm) light-emitting diodes(LEDs) each with specifically designed irregular sawtooth electron blocking layer(EBL) by using the APSYS simulation program.The internal quantum efficiencies(IQEs),light output powers,carrier concentrations in the quantum wells,energy-band diagrams,and electrostatic fields are analyzed carefully.The results indicate that the LEDs with composition-graded pAl_xGa_(1-x)N irregular sawtooth EBLs have better performances than their counterparts with stationary component p-AlGaN EBLs.The improvements can be attributed to the improved polarization field in EBL and active region as well as the alleviation of band bending in the EBL/p-AlGaN interface,which results in less electron leakage and better hole injection efficiency,thus reducing efficiency droop and enhancing the radiative recombination rate.     

一种功控状态保持低功耗C单元设计

提出了一种新的具有状态保持功能的功控低功耗C单元, 该C单元采用高阈值NMOS管作为功控开关, 以减小C单元休眠期间的漏功耗, 并利用交叉耦合的高阈值反相器构成数据保持单元, 保持电路休眠状态时的数据. 版图后仿真结果表明: 该C单元具有正确的逻辑功能, 与传统弱反馈C单元相比, 其漏功耗下降86.6%, 动态功耗下降7.6%, 可在基于功控技术的低功耗异步电路设计中应用.     

Large angular scale CMB anisotropy from an excited initial mode

According to inflationary cosmology, the CMB anisotropy gives an opportunity to test predictions of new physics hypotheses. The initial state of quantum fluctuations is one of the important options at high energy scale, as it can affect observables such as the CMB power spectrum. In this study a quasi-de Sitter inflationary background with approximate de Sitter mode function built over the Bunch-Davies mode is applied to investigate the scale-dependency of the CMB anisotropy. The recent Planck constraint on spectral index motivated us to examine the effect of a new excited mode function(instead of pure de Sitter mode) on the CMB anisotropy at large angular scales. In so doing, it is found that the angular scale-invariance in the CMB temperature fluctuations is broken and in the limit 200 a tiny deviation appears. Also, it is shown that the power spectrum of CMB anisotropy is dependent on a free parameter with mass dimension H M* Mp and on the slow-roll parameter.     

Fusion Energy and Stopping Power in a Degenerate DT Pellet Driven by a Laser-Accelerated Proton Beam

In this paper, we have improved the fast ignition scheme in order to have more authority needed for high-energy-gain. Due to the more penetrability and energy deposition of the particle beams in fusion targets, we employ a laser-to-ion converter foil as a scheme for generating energetic ion beams to ignite the fusion fuel. We find the favorable intensity and wavelength of incident laser by evaluating the laser-proton conversion gain. By calculating the source-target distance, proton beam power and energy are estimated. Our analysis is generalized to the plasma degeneracy effects which can increase the fusion gain several orders of magnitude by decreasing the ion-electron collisions in the plasma. It is found that the wavelength of 0.53 μm and the intensity of about 10²⁰ W/cm², by saving about 10% conversion coefficient, are the suitable measured values for converting a laser into protons. Besides, stopping power and fusion burn calculations have been done in degenerate and non-degenerate plasma mediums. The results indicate that in the presence of degeneracy, the rate of fusion enhances.     

分数阶傅里叶变换结合高峰均比抑制算法对CO-OFDM系统的影响分析

针对相干光正交频分复用系统中出现的高峰值平均功率比问题,提出分数阶傅里叶变换与高峰值平均功率比抑制算法相结合的方法.计算表明:随着分数阶傅里叶变换阶数的减小,信号的峰值平均功率比逐渐降低;与抑制算法结合后可进一步降低系统的峰值平均功率比,并解决抑制算法影响系统性能的问题.从结合的兼容性、抑制高峰值平均功率比效果及改善引入抑制算法后对系统的负面影响三方面进行仿真分析,结果表明:采用选择性映射算法与分数阶傅里叶变换结合后,旋转因子同为4时,峰值平均功率比高于6.6dB的概率较单一选择性映射算法低104;选取高峰值平均功率比抑制情况相近时,结合算法的时间复杂度比单一选择性映射算法降低了8倍;采用限幅算法与分数阶傅里叶变换结合的仿真情况也较单一限幅算法有很大提高,表明该算法结合的兼容性良好.