A decomposition heuristics for the container ship stowage problem

In this paper we face the problem of stowing a containership, referred to as the Master Bay Plan Problem (MBPP); this problem is difficult to solve due to its combinatorial nature and the constraints related to both the ship and the containers. We present a decomposition approach that allows us to assign a priori the bays of a containership to the set of containers to be loaded according to their final destination, such that different portions of the ship are independently considered for the stowage. Then, we find the optimal solution of each subset of bays by using a 0/1 Linear Programming model. Finally, we check the global ship stability of the overall stowage plan and look for its feasibility by using an exchange algorithm which is based on local search techniques. The validation of the proposed approach is performed with some real life test cases. This work has been developed within the research area: “The harbour as a logistic node” of the Italian Centre of Excellence on Integrated Logistics (CIELI) of the University of Genoa, Italy     

Experimental investigation of the aquatic propulsion caused by localised flexural wave propagation in immersed wedges and plates

This paper describes the results of the experimental verification of the idea of wave-like aquatic propulsion of autonomous and man-inhabited vessels first published about 10 years ago by one of the present authors (V.V.K.). The idea is based on employing the unique type of localised flexural elastic waves propagating along edges of wedge-like structures immersed in water (wedge elastic waves). Such wedge-like structures supporting localised elastic waves can be attached like fish fins to a body of a small ship or a submarine and used for their propulsion. The proposed principle of employing localised flexural waves as a source of aquatic propulsion has been biologically inspired by the specific swimming mode used in nature by stingrays. To verify the idea experimentally, the first working prototype of a small catamaran using the above-mentioned wave-like propulsion via the attached rubber keel has been build and tested in Loughborough University. The tests have been carried out in two phases, in a water tank and then in open water. The test results have shown that the catamaran was propelled very efficiently and could achieve the speed of 36 cm/s, i.e., about one vehicle length per second, thus demonstrating that the idea of wave-like propulsion of small man-inhabited craft is viable. The reported proof of the viability of this idea may open new opportunities for marine craft propulsion, which can have far reaching implications.     

钛合金（TC-6）二阶和三阶弹性常数

 用脉冲回波重叠法测量了钛合金（TC-6）的二阶、三阶弹性常数。实验中发现dμ/dp<0（p<0.17 GPa）,dμ/dp>0（p>0.17 GPa）。     

量化方法研究分子结BEMP和TEMP的电子输运特性

通过结合杂化密度泛函和前线轨道理论与弹性散射格林函数方法研究了BE- MP(benzene-1,4-di-ethynyl-4-mercaptophenyl)和TEMP(thiophene-2,5-di-ethynyl-4- mercaptophenyl)两分子结的输运性质。基于杂化密度泛函方法计算两扩展分子电子结构的基础上,计算了两分子的输运性质．计算结果显示:电流增加来源于电极和分子轨道的共振;电导曲线呈现出平台特征．在此基础上从扩展分子A(Au-BEMP-Au)中间的苯环的旋转而引起电流减小的角度解释了负微分电阻现象．     

毗邻沙漠地区微分博弈模型与宏观环境治理策略研究

工业化发展导致了脆弱的土地进一步沙漠化,沙漠地区政府应综合考虑经济发展与土地沙漠化导致的生态质量降低。通过构建两个沙漠化地区微分博弈模型,研究了两个地区的沙漠治理问题。研究结果表明,提高工业生产排放技术或沙漠治理技术均能够提高均衡经济产出水平,在工业生产收益系数较高的情况下也能够提高沙漠治理投入水平,并且两种技术提高存在交互效应;只有对生产排放技术水平和沙漠治理技术水平较高的地区,延长地方政府领导任期有利于沙漠治理;实现沙漠完全治理情况下控制土地再沙化的治理投入低于控制沙漠稳定在一定规模的治理投入。     

基于储量结构变化的油田开发指标预测与优化数学模型研究

大型油田开发过程中,随着不同类型新储量的不断投入,地质储量结构发生变化,表征油田整体开发技术与经济效果的关键性指标,如产量、可采储量、采收率、储采比、开发成本与操作成本等等也随之改变,其变化规律可用一套数学模型来描述。在开发指标预测基础上,运用多属性决策方法如TOPSIS,可以实现新投产区块组合方案的优选。应用实例表明,本文方法实用、操作性强,可以为油区开发决策提供重要方法与手段。     

Peculiarities of changes of some physicomechanical characteristics of monoisotopes B, B and natural β-boron

Real structure and some physicomechanical characteristics of the samples of natural beta-rhombohedral boron B as well as of its ¹⁰B and ¹¹B monoisotopes have been studied. It was shown that the influence of ¹⁰B and ¹¹B isotopes on physicomechanical properties of boron had a different character. In particular, the samples enriched with ¹¹B had high values of microhardness, shear modulus (SM) and elastic limit if compared to those of boron, while the samples enriched with ¹⁰B monoisotopes were characterized with high values of thermal expansion coefficient (TEC) and thermal conductivity; lattice parameters a and c increased by the sequence: ¹¹B, B, ¹⁰B. It was established that TEC, thermal conductivity, microhardness, SM and shear elastic limit increased in all samples at annealing for 5 h at 1500 °C regardless of isotope content.     

Elastic Moduli and Activation Energies for an Epoxy/m-XDA System by DMA and DSC

The influence of the resin/diamine ratio on the properties of the system diglycidyl ether of bisphenol A (BADGE n=0/m-xylylenediamine) (m-XDA) was studied. Variation of this ratio resulted in significant effects on the cure kinetics and final dynamic mechanical properties of the product material. The study was made in terms of storage modulus (E′), vss modulus (E″) and molecular mass between cross-links (M_c) at different ratios. Two geometries (cylindrical and rectangular) were considered. The influence of temperature was studied through the activation energy (E_a>), which depends on the epoxy/amine ratio and the geometry of the samples. Glass transition temperatures (T_g>) and glass transition temperatures for thermosets with null degree of conversion (T_go>) were determined by DSC. T_g> decreases when amounts of curing agent greatly in excess of the stoichiometric composition were used. This revised version was published online in July 2006 with corrections to the Cover Date.     

Atom-surface elastic scattering in the presence of laser radiation

A qualitative discussion on atom-surface elastic scattering taking place in the presence of laser radiation is given. It is suggested that appreciable effects of laser radiation on diffraction patterns may be expected if the laser radiation is capable of inducing electronic transitions in atoms with a large probability.Research sponsored by the Air Force Office of Scientific Research (AFSC), United States Air Force, under Contract No. F49620-78-C-0005, and the National Science Foundation under Grant No. CHE77-27826. The United States Government is authorized to reproduce and distribute reprints for governmental purposes notwithstanding any copyright notation hereon.Alfred P. Sloan Research Fellow, 1976–1980; Camille and Henry Dreyfus Teacher-Scholar, 1975–1980.     

Elastic moduli and structure of low density polyethylene

Summary Low density polyethylene film is drawn at room temperature four times the original length and subjected to thermal annealing at 60, 80, and 100 °C keeping the film length constant. Long spacing measured by SAXS increased with increasing temperature of annealing; the increase of the long spacing is presumed to be due to the decrease of the number of micelles through relaxation during the annealing. Simultaneous measurement of the changes of the long spacing and the film length by stretching is carried out and stress-extension curves are obtained. The values of the initial moduli of the long spacingE ₁ and the film lengthY are very near to each other. Elastic modulus of the crystal latticeE _c is known to be 235 GN/m² and that of the amorphous regionE _a is found to be 0.15 GN/m². When higher stress is applied than in the case of the initial modulus, the percentage of extension of film is much greater than that of the long spacing. The discrepancy is explained by the increase of the number of micelles through stress crystallization.Dedicated to Professor Dr. K. Ueberreiter on the occasion of his 70th birthday.