Pseudo-Spin Model for the Cytoskeletal Microtubule Surface

Due to the inherent symmetry structures and the electric properties in the microtubule (MT), we treat the MT as a one-dimensional ferroelectric system and describe the nonlinear dynamics of dimer electric dipoles in one protofilament of the MT by virtue of the double-well potential. Consequently, the physical problem has been mapped onto the pseudo-spin system, and the mean-field approximation has been taken to obtain some physical results, including the expression for the phase transition temperature Tc and the estimated value of Tc (=312 K).     

二元液态金属Cu-Ni和Ag-Cu凝固过程的分子动力学模拟研究

用Quantum Sutton-Chen多体势对Ag6Cu4和CuNi液态金属凝固过程进行了分子动力学模拟研究.在冷却速率2×1012到2×1014K/s范围内,CuNi总是形成fcc晶体结构,而Ag6Cu4总是形成非晶态结构.考虑到CuNi及AgCu中原子半径之比分别为1.025和1.13,那么模拟结果证实了原子的尺寸差别是非晶态合金形成的一个主要影响因素.此外采用键对及原子多面体类型指数法对凝固过程中微观结构组态变化的分析,不但能说明二十面体结构在非晶态合金形成和稳定性中所起的关键作用,又有助于对液态金属的凝固过程、非晶态结构特征的深入理解.     

富勒烯(C_(60)/C_(70))与N,N,N′,N′-四-(对甲苯基)-4,4′-二胺1,1′-二苯硒醚(TPDASe)间光诱导电子转移过程的激光光解研究

富勒烯 (C60 /C70 )与N ,N ,N′ ,N′ 四 (对甲苯基 ) 4,4′ 二胺 1,1′ 二苯硒醚 (TPDASe)间在激光光诱导条件下 ,发生了分子间的电子转移过程 .在可见 -近红外区 ( 60 0～ 12 0 0nm) ,观测到了TPDASe阳离子自由基、富勒烯 (C60 /C70 )激发三线态和阴离子自由基 ,在苯腈溶液中 ,观测瞬态谱测定了电子从TPDASe转移到富勒烯 (C60 /C70 )激发三线态的量子转化产率(ΦTet)和电子转移常数 (Ket) .     

混合参数对中小质量恒星结构和演化的影响

计算了在不同对流混合参数下,8M⊙和1.3M⊙恒星由主序阶段到红巨星阶段的演化.得出以下主要结论:不同大小的混合参数导致了恒星在HR图中的演化轨迹、对流外壳的第2次向内延伸深度和回退程度、氢壳层源的温度和产能率,以及氦燃烧核的寿命等有显著差别,还注意到8M⊙恒星混合参数α≥2.2时会出现第2次蓝拐.     

层状结构钒磷酸盐（pipzH2）2[（VO）3（HPO4）2（PO4）2]·H2O的水热合成及热稳定性研究

水热合成了钒磷酸盐体系中少有的结构中具有多面体共棱连接的层状孔道结构化合物（pipzH2）2[（VO）3（HPO4）2（PO4）2]·H20的纯相。用ICP、单晶XRD、TG-DTA、粉晶XRD和SEM对产物进行了表征。结果表明，化合物在空气中开始失重的温度为274℃，随着温度的升高，化合物中有机分子分解，同时伴随着重结晶过程，但晶体的外观形貌保持不变直至有机部分分解殆尽。相变过程分析和与模板相同的（pipzH2）0.5[（VO）（PO4）]的热稳定性对比研究表明，有机模板的稳定性及分解过程不但影响化合物的热稳定性和热变化过程，还影响原晶体微形貌的保持；无机骨架结合的牢固程度在很大程度上影响化合物的热稳定性。     

M/G/1非空竭服务休假排队系统随机分解的简化算法

本文根据M／G／1非空竭服务休假排队系统稳态队长随机分解的结构特征提出一种统一算法，该方法简洁高效，避免了再生循环方法繁杂的运算。运用该方法得出的结果与已知的用再生循环方法得出的结论一致。并且修正了Levy(1989)关于Bernoulli闸门服务休假排队系统随机分解的一个错误。     

Fabrication of Compound Lattice by Holographic Lithography

Some compound lattices in photonic crystals with large complete photonic band gaps, such as the diamond structure and the two-dimensional hexagonal compound structure, is desired for fabrication. A novel method for fabrication of compound lattices by holographic lithography is reported. The key point is phase modulation by photoelectrical control and multiple-exposure techniques. This technique introduces many advances: for instance,using the same coherent beams and without changing the position of the sample during multiple-exposure.     

Spectral property and its shape transition on ^72-84Kr isotopes in microscopic core plus two-quasiparticle approach

By using a microscopic sdIBM-2 2q.p, approach, the levels of the ground-band, 7-band and partial two-quasi-particle bands for ^72-84Kr isotopes are calculated. The data obtained are in good agreement with the recent experimental results, and successfully reproduce the nuclear shape phase transition of ^72-S4Kr isotopes at zero temperature.The ground-state band is described successfully up to J^π=18^ and Ex=10.0MeV. Based on this model, the aligned requisite minimum energy has been deduced. The theoretical calculations indicate that no distinct change of nuclear states is caused by the abruptly broken pair of a boson, and predict that the first backbending of Kr isotopes may be the result of aligning of two quasi-neutrons in orbit g9/2, which galus the new experimental support of the measurements of g factors in the ^78-86Kr isotopes.     

多媒体教学手段的不断改进

针对多媒体教学手段存在的问题及如何改进所进行的思考和实践。     

配合物氧化还原反应中的电子迁移轨道

研究了配合物氧化还原反应中的过渡态配合物结构 ,电子迁移轨道及反应速率。