Adaptive Interpolation by Scaled Multiquadrics

We present an adaptive method to extract shape-preserving information from a univariate data sample. The behavior of the signal is obtained by interpolating at adaptively selected few data points by a linear combination of multiquadrics with variable scaling parameters. On the theoretical side, we give a sufficient condition for existence of the scaled multiquadric interpolant. On the practical side, we give various examples to show the applicability of the method.     

On accurate boundary conditions for a shape sensitivity equation method

This paper studies the application of the continuous sensitivity equation method (CSEM) for the Navier–Stokes equations in the particular case of shape parameters. Boundary conditions for shape parameters involve flow derivatives at the boundary. Thus, accurate flow gradients are critical to the success of the CSEM. A new approach is presented to extract accurate flow derivatives at the boundary. High order Taylor series expansions are used on layered patches in conjunction with a constrained least‐squares procedure to evaluate accurate first and second derivatives of the flow variables at the boundary, required for Dirichlet and Neumann sensitivity boundary conditions. The flow and sensitivity fields are solved using an adaptive finite‐element method. The proposed methodology is first verified on a problem with a closed form solution obtained by the Method of Manufactured Solutions. The ability of the proposed method to provide accurate sensitivity fields for realistic problems is then demonstrated. The flow and sensitivity fields for a NACA 0012 airfoil are used for fast evaluation of the nearby flow over an airfoil of different thickness (NACA 0015). Copyright © 2005 John Wiley & Sons, Ltd.     

The influence of hard‐segments on two‐phase structure and shape memory properties of PCL‐based segmented polyurethanes

Poly(ε‐caprolactone)‐based segmented polyurethanes (PCLUs) were prepared from poly(ε‐caprolactone) diol, diisocyanates (DI), and 1,4‐butanediol. The DIs used were 4,4′‐diphenylmethane diisocyanate (MDI), 2,4‐toluenediisocyanate (TDI), isophorone diisocyanate (IPDI), and hexamethylene diisocyanate (HDI). Differential scanning calorimetry, small‐angle X‐ray scattering, and dynamic mechanical analysis were employed to characterize the two‐phase structures of all PCLUs. It was found that HDI‐ and MDI‐based PCLUs had higher degree of microphase separation than did IPDI‐ and TDI‐based PCLUs, which was primarily due to the crystallization of HDI‐ and MDI‐based hard‐segments. As a result, the HDI‐based PCLU exhibited the highest recovery force up to 6 MPa and slowest stress relaxation with increasing temperature. Besides, it was found that the partial damage in hard‐segment domains during the sample deformation was responsible for the incomplete shape‐recovery of PCLUs after the first deformation, but the damage did not develop during the subsequent deformation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 557–570, 2007     

60keV质子辐照对TiNi记忆合金薄膜马氏体相变的影响

 利用磁控溅射的方法在氧化后的单晶Si基片上制备了TiNi形状记忆合金薄膜，利用示差扫描量热法和原位X射线衍射研究了薄膜的马氏体相变特征。通过60keV质子注入（辐照）薄膜样品研究了H+离子对合金薄膜马氏体相变特征的影响，结果表明氢离子注入后引起了马氏体相变开始Ms和结束点Mf以及逆马氏体相变开始As和结束温度Af的下降，而对R相变开始Rs和结束温度Rf影响不大。掠入射X射线衍射表明H+离子注入后有氢化物形成。H⁺离子注入形成的氢化物是引起相变点的变化的主要因素。     

Production of superfine fibers by the electrospinning method

Weakly conducting fluid flows in an electric field in the presence of phase interfaces are investigated theoretically and experimentally. The object of the investigation is an axisymmetric jet. The analysis is carried out within the framework of electrohydrodynamics (EHD) with allowance for surface charge transfer on mobile interfaces. The jet shape is calculated at large distances from the outflow point. The theoretical and experimental data are compared for Newtonian and polymeric fluids.     

An existence result for a quadrature surface free boundary problem

The aim of this paper is to present two different approachs in order to obtain an existence result to the so-called quadrature surface free boundary problem. The first one requires the shape derivative calculus while the second one depends strongly on the compatibility condition of the Neumann problem. A necessary and sufficient condition of existences is given in the radial case.     

Transient vibrations of a tau inclined cable with a riding accelerating mass

The objective of this paper is a theoretical and numerical study of the dynamics of a taut inclined cable with a riding accolerating mass, which is suspended from two points of different elevation. The moving mass is a trolley that is accelerated by a solid fuel rocket down the inclined cable and is aerodynamically brought to a halt. The thrust of the rocket is tangential to the deformed configuration of the cable.Methods of analysis consist of the dynamics of small deformations superimposed on the static catenary state. The problem is nonlinear due to presence of friction and the convective acceleration interaction of the moving mass and the cable. Galerkin's procedure for removal of spatial dependence and numerical integration are used to obtain convergent solutions.Deceased     

Shape Hessian for generalized Oseen flow by differentiability of a minimax: A Lagrangian approach

The goal of this paper is to compute the shape Hessian for a generalized Oseen problem with nonhomogeneous Dirichlet boundary condition by the velocity method. The incompressibility will be treated by penalty approach. The structure of the shape gradient and shape Hessian with respect to the shape of the variable domain for a given cost functional are established by an application of the Lagrangian method with function space embedding technique. This work was supported by the National Natural Science Fund of China (No. 10371096) for ZM Gao and YC Ma.     

基于任意形状颗粒集合二值图像的体积估算模型

基于任意形状颗粒集合的二值图像,提出了估计其体积(或质量)的方法.首先利用发光背景台面获取的颗粒灰度图像变换为相应的二值图像,得到颗粒的边界轮廓.然后再基于其边界信息,定义与颗粒形状特征相关的描述量,并将其无量纲化.将由此定义的无量纲参变量作为回归变量建立一个多元线性回归(multiple linear regression)模型用以估计颗粒集合的扁平度,进而估算颗粒体积.回归变量的系数由随机采样的501个样本颗粒(尺寸范围为4.75～25 mm)用误差最小平方和求得.将模型应用于由具有相似统计分布特征的其他颗粒集合,并将得到的体积估计值与其体积真实值相比较,实验结果显示模型的相对误差在±2%以内.