Large eddy simulations of a circular orifice jet with and without a cross-sectional exit plate

The effect of a cross-sectional exit plane on the downstream mixing characteristics of a circular turbulent jet is in- vestigated using large eddy simulation （LES）. The turbulent jet is issued from an orifice-type nozzle at an exit Reynolds number of 5 ×104. Both instantaneous and statistical velocity fields of the jet are provided. Results show that the rates of the mean velocity decay and jet spread are both higher in the case with the exit plate than without it. The existence of the plate is found to increase the downstream entrainment rate by about 10% on average over the axial range of 8-30de （exit diameter）. Also, the presence of the plate enables the formation of vortex rings to occur further downstream by 0.5-1 .Ode. A physical insight into the near-field jet is provided to explain the importance of the boundary conditions in the evolution of a turbulent jet. In addition, a method of using the decay of the centreline velocity and the half-width of the jet to calculate the entrainment rate is proposed.     

基于波传播法的周期复合板振动带隙衰减特性研究

运用波传播法对有限和无限周期对边简支复合板的振动带隙衰减特性进行了研究.在建立相邻板结构边界连续方程的基础上, 分别运用传递矩阵和Bloch定理建立了有限和无限周期复合板的耦合运动方程, 并详细对比分析了有限和无限周期复合板带隙衰减特性的关联关系.研究表明: 周期板结构的振动带隙频率范围与激励方式和激励位置是相关的, 若周期复合板在宽度方向按某阶模态进行线激励, 则该激励下的振动带隙与无限周期复合板在该阶模态下的振动带隙是一致的; 若周期板在点激励作用, 则该点激励下的振动带隙是参与振动的各阶模态振动带隙的交集. 此外, 还进一步研究了结构阻尼对振动衰减带隙的影响. 关键词： 周期复合板 带隙衰减特性 波传播法 结构阻尼     

磁流变加工的连续相位板波前及光强特性

对采用磁流变抛光(MRF)工艺加工的大口径连续相位板(CPP)的波前及其光强控制特性进行了分析,对由不同的加工参数(走刀间距和走刀偏置)所加工的三组CPP进行了比较,并分析了MRF加工所引入的中频误差对CPP波前和光强特性的影响。结果表明,走刀间距为2mm、对应走刀偏置范围为0.1~0.3mm时所加工CPP的波前及其光强控制能力较差,远场有一定程度的旁瓣产生;走刀间距为2mm、偏置范围为0.4~0.5mm时所加工CPP和走刀间距为1mm、偏置范围为0.1~0.3mm时所加工CPP相比较,迭代加工效率提高,CPP波前中频误差得到一定的改善。进一步分析表明MRF所引入的中频误差对CPP波前梯度及旁瓣影响较大。     

椭偏法测量云母波片相位延迟量及双折射率

为了得到云母波片的相位延迟量和双折射率随波长的变化关系,利用椭偏光谱仪连续测量了云母波片在400~770 nm光谱范围内的延迟量.在对云母波片进行校准后,测量的数据被光电探测器收集并输送到计算机,根据输出的数据可以得到云母波片的相位延迟量随波长的变化.利用测得的延迟量计算出了云母波片在一定光谱范围内的双折射率,得到了云母波片的双折射率色散曲线,并通过拟合得到了双折射率色散公式.该方法能测量任意波片的相位延迟量,并且具有测量方便、周期短、精度高等特点.     

微型激光光学引擎中光学噪音的抑制

分析了微型激光投影引擎的两种主要光学噪音|干涉网格和激光散斑产生的基理|提出采用振动的随机位相板同时实现干涉网格和激光散斑抑制的方法并进行了理论分析|自行设计了微型激光投影引擎,利用微型电控马达带动随机位相板振动,用CCD相机在不同的F#及曝光时间下对投影图像进行了采集,并对图像的散斑对比度行了测试.结果表明,通过静止的随机位相板可以很好地抑制干涉网格噪音|通过使随机位相板以大于视觉暂留效应形成的融合频率进行振动,可以同时抑制干涉网格和激光散斑,使得散斑对比度小于5%,达到投影观察的要求.     

螺旋光子筛用于相衬成像的模拟研究

为了提高螺旋波带片用于相衬成像的分辨率和成像对比度,因此本文将螺旋波带片的透光环带替换为透光微孔,以类-贝塞尔函数作为螺旋光子筛透过率的振幅调制窗函数设计了一种螺旋光子筛.在相同的特征尺寸下,螺旋光子筛比螺旋波带片具有更大的数值孔径,因此分辨率更高.同时基于光瞳切趾原理,经过类-贝塞尔振幅调制窗函数对螺旋光子筛透光微孔的分布进行调制,螺旋光子筛的成像对比度将高于螺旋波带片.通过数值计算和仿真分析表明:螺旋光子筛的点扩展函数主瓣宽度相对于螺旋波带片更窄,旁瓣幅值也相对更低.在相衬成像中,螺旋光子筛不仅能够消除螺旋波带片对圆盘状位相物体成像时图像的"浮雕"效应而且能够更为清晰地分辨出位相跳变更为密集的周期矩形条状物体.因此,螺旋光子筛用于相衬成像中将具有更高的成像分辨率和成像对比度,其在医学领域将具有广阔的运用前景.     

Stagnation point flow and heat transfer over a non-linearly moving flat plate in a parallel free stream with slip

An analysis is presented for the steady boundary layer flow and heat transfer of a viscous and incompressible fluid in the stagnation point towards a non-linearly moving flat plate in a parallel free stream with a partial slip velocity. The governing partial differential equations are converted into nonlinear ordinary differential equations by a similarity transformation, which are then solved numerically using the function bvp4c from Matlab for different values of the governing parameters. Dual (upper and lower branch) solutions are found to exist for certain parameters. Particular attention is given to deriving numerical results for the critical/turning points which determine the range of existence of the dual solutions. A stability analysis has been also performed to show that the upper branch solutions are stable and physically realizable, while the lower branch solutions are not stable and, therefore, not physically possible.     

A low specific on-resistance SOI LDMOS with a novel junction field plate

A low specific on-resistance SO1 LDMOS with a novel junction field plate （JFP） is proposed and investigated theo- retically. The most significant feature of the JFP LDMOS is a PP-N junction field plate instead of a metal field plate. The unique structure not only yields charge compensation between the JFP and the drift region, but also modulates the surface electric field. In addition, a trench gate extends to the buffed oxide layer （BOX） and thus widens the vertical conduction area. As a result, the breakdown voltage （BV） is improved and the specific on-resistance （Ron,sp） is decreased significantly. It is demonstrated that the BV of 306 V and the Ron,sp of 7.43 mΩ.cm2 are obtained for the JFP LDMOS. Compared with those of the conventional LDMOS with the same dimensional parameters, the BV is improved by 34.8%, and the Ron,sp is decreased by 56.6% simultaneously. The proposed JFP LDMOS exhibits significant superiority in terms of the trade-off between BV and Ron,sp. The novel JFP technique offers an alternative technique to achieve high blocking voltage and large current capacity for power devices.     

Stress and fracture analysis in delaminated orthotropic composite plates using third-order shear deformation theory

The third-order shear deformable plate theory is applied in this work to calculate the stresses and energy release rates in delaminated orthotropic composite plates with straight crack front. The delaminated parts are modeled by the general third-order plate theory, while a double-plate model with interface constraint is developed for the uncracked portion of the plate. The governing equations of the uncracked part are formulated by considering the equilibrium and the displacement continuity along the interface. As an example, a simply-supported delaminated orthotropic plate subjected to a point force is solved adopting Lévy plate formulation and the state-space approach. The mode-II and mode-III energy release rate distributions along the crack front were calculated by the J-integral. To verify the analytical results the 3D finite element model of the plate was constructed and the energy release rates were calculated by the virtual crack-closure technique. A previous second-order plate theory solution was also utilized in the course of the comparison. The results indicate a good agreement between analysis and numerical computation and that third-order theory is better in some cases than the second-order approximation.     

Mindlin–Timoshenko systems with Kelvin–Voigt: analyticity and optimal decay rates

This paper is concerned with asymptotic stability of Mindlin–Timoshenko plates with dissipation of Kelvin–Voigt type on the equations for the rotation angles. We prove that the corresponding evolution semigroup is analytic if a viscoelastic damping is also effective over the equation for the transversal displacements. On the contrary, if the transversal displacement is undamped, we show that the semigroup is neither analytic nor exponentially stable. In addition, in the latter case, we show that the solution decays polynomially and we prove that the decay rate found is optimal.