First principles study of the structure,electronic state,and stability of CmN2 clusters

Geometric and electronic properties of C_mN₂ (m = 1–14) clusters have been investigated by density functional theory using the hybrid B3LYP functional and the 6‐311G(d) basis set. Harmonic frequencies for these clusters are given to aid in the characterization of the ground states. These results show that C_mN₂ (m = 1–14) clusters form linear structures with D_∞h symmetry. Two N atoms favor to bond at ends in linear isomers. The chains with odd m have triplet ground states whereas the ones with even m have singlet ground states. The calculated HOMO–LUMO gaps and ionization potentials all show that the C_mN₂ (m = 1–14) clusters with even m are more stable than those with odd m, which is consistent with the observed even–odd alternation of the time‐of‐flight signal intensities. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem, 2004     

New lipids from the soft corals of the Andaman Islands

Sphingolipids and glycolipids including previously unknown (2S,3S,4R)-1,3,4-trihydroxy-2-(2-(R)-hydroxyoctadecanoylamino)octadec-8E-ene, (2S,3R)-1,3-dihydroxy-2-octadecanoylamino-4E,8E-hexadecadiene, and (2-hydroxy-3-hexadecyloxypropyl)--L-fucopyranoside were isolated from soft corals collected on the shelf near the Andaman Islands (Indian Ocean). The structures of all compounds were established by spectroscopic methods and chemical analyses. The lipids possessed antibacterial activity against Bacillus subtilis, Bacillus pumilus, Escherichia coli, and Pseudomonas aeruginosa and antifungal activity against Aspergillus niger, Rhizopus oryzae, and Candida albicans.     

载体和担载酸对乙烯直接氧化合成乙酸反应的影响

 在固定床流动反应器上研究了Pd－酸／载体体系催化乙烯直接氧\r\n化合成乙酸的反应，并对载体相同但担载酸强度不同的催化剂的催化活\r\n性进行了比较．结果表明，担载酸的强度明显影响催化剂的活性，酸强\r\n度越大其催化活性越高．用NH3－TPD和异丙醇脱水探针反应表征了二氧\r\n化硅、活性碳和酸性白土三种载体担载的Pd－H4SiW12催化剂的酸性，\r\n并测试了三种催化剂的催化活性．结果表明，载体通过影响担载酸的强\r\n度而影响催化剂的活性，载体上的强酸中心越多，催化剂的活性越高．\r\n测定了二氧化硅、活性碳和酸性白土三种载体担载的Pd－H4SiW12催化\r\n剂上Pd的分散度，并与其催化活性相关联．结果表明，决定乙烯直接氧\r\n化生成乙酸反应活性的主要因素是催化剂的酸强度而不是Pd的分散度．     

New Ni(II)Cu(II)Ni(II) trinuclear complexes with an 5=3/2 high-spin ground

Four new heterotrinuclear complexes have been synthesized and characterized, namely {[Ni(L)₂]₂[Cu(opba)]}(ClO₄)₂, where opba denotes o-phenylenebis(oxamato) and L stands for 1,10-phenanthroline(phen) (1), 5-nitro-l,10-phenanthroline(NO₂-phen) (2), 2,2′-bipyridyl(bpy) (S) and 4,4′-dimethyl-2,2′-bipyridyl(Me₂bpy) (4). The temperature dependence of the magnetic susceptibility of {[Ni(phen)₂]₂[Cu(opba)]}(ClO₄)₂3H₂O has been studied in the 4–300 K range, giving the exchange integral J—109 cm^?1. The HMT vs. T plot exhibits a minimum at about 100 K, characteristic of this kind of coupled polymetallic complex with an irregular spin-state structure.     

One-dimensional Ising chain with competing interactions: Exact results and connection with other statistical models

We study the ground state properties of a one-dimensional Ising chain with a nearest-neighbor ferromagnetic interactionJ ₁, and akth neighboranti-ferromagnetic interactionJ _k . WhenJ _k/J₁=–1/k, there exists a highly degenerate ground state with a residual entropy per spin. For the finite chain with free boundary conditions, we calculate the degeneracy of this state exactly, and find that it is proportional to the (N+k–1)th term in a generalized Fibonacci sequence defined by,F _N ^(k) =F _N–1 ^(k) +F _N–k ^(k) . In addition, we show that this one-dimensional model is closely related to the following problems: (a) a fully frustrated two-dimensional Ising system with a periodic arrangement of nearest-neighbor ferro- and antiferromagnetic bonds, (b) close-packing of dimers on a ladder, a 2× strip of the square lattice, and (c) directed self-avoiding walks on finite lattice strips.Work partially supported by grants from AFOSR and ARO.     

Removal of Mn(II) and Cd(II) from wastewaters by natural and modified clays

The adsorption capacities of commercial and Brazilian natural clays were evaluated to test their applications in wastewater control. We investigated the process of sorption of manganese(II) and cadmium(II) present in synthetic aqueous effluents, by calculating the adsorption isotherms at 298 K using batch experiments. The influence of temperature and pH on the adsorption process was also studied. Adsorption of metals was best described by a Langmuir isotherm, with values of Q ₀ parameter, which is related to the sorption capacity, corresponding to 6.3 mg g^{− 1} for K-10/Cd(II), 4.8 mg g^{− 1} for K-10/Mn(II), 11.2 mg g^{− 1} for NT-25/Cd(II) and 6.0 mg g^{− 1} for NT-25/Mn(II). We observed two distinct adsorption mechanisms that may influence adsorption. At the first 5 min of interaction, a cation exchange mechanism that takes place at exchange sites located on (001) basal planes is predominant. This process is inhibited by low pH values. After this first and fast step, a second sorption mechanism can be related to formation of inner-sphere surface complexes, which is formed at edges of the clay. The rate constants and the initial sorption rates correlate positively with temperature in all studied systems, denoting the predominance of a physisorption process. The addition of complexing agents that are incorporated within the K10 structure, enhance metal uptake by the adsorbent. The results have shown that both Cd(II) and Mn(II) were totally retained from a 50 mg L^{− 1} solution when K10 grafted with ammonium pyrrolidinedithiocarbamate (APDC) was used as adsorbent.     

一种不同地面分辨率图像的拼接算法

航空遥感监测中变焦镜头的广泛应用以及飞行高度的变化会获得不同地面分辨率的航空影像,因此为了实时监控到飞行区域的整体情况,需要对不同地面分辨率的图像进行拼接。提出了针对不同地面分辨率图像进行拼接的方法。首先用四分法对图像进行分割,检测变化倍率,选择配准策略;然后用基于加速鲁棒性特征(Speeded-Up Robust Features,SURF)的算法对相邻图像进行拼接。获得了焦距变化从高倍过渡到低倍,或从低倍过渡到高倍的拼接图像。通过航空变焦模拟影像的拼接实验和地面变焦影像的拼接实验表明,该方法能够对不同地面分辨率的图像进行拼接,且拼接结果均以高分辨率为基准。     

Attapulgite grafted with polystyrene via a simultaneous reverse and normal initiation atom transfer radical polymerization

The surface grafting of attapulgite (ATP) with polystyrene (PS) was established via a simultaneous reverse and normal initiation atom transfer radical polymerization (SR&NIATRP). 4‐(chloromethyl)phenyltrimethoxysilane (CMPTMS) chemical bounded on the surface of ATP (ATP‐Cl, Cl‐I) was prepared via one‐step self‐assembly. SR&NI ATRP of styrene was conducted using CuCl₂ complex tris(2‐(dimethylamino)ethyl)amine (Me₆‐TREN) as the catalytic system, initiated by 2,2‐azobis(isobutyronitrile) (AIBN) and ATP‐Cl. FT‐IR, XRD, XPS, TGA and TEM data were consistent with the grafting of benzyl chloride groups and PS chains on ATP surface. The controllability of polymerization was investigated by the kinetics behavior under different molar ratio of AIBN and CuCl₂. The obtained polymer possessed a uniform distribution of molecular weights with a lower polydispersity index of 1.2～1.4. The relationship between polymerization on the surface of ATP and in solution was discussed in detail based on TGA data of hybrid particles and GPC trace of free polymer in solution. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1508–1516     

Micro-composites based on polylactic acid with kaolinite or rice husk particles and their performance on water vapor permeability

In this work, the effect of addition of kaolinite and rice husk microparticles on the water vapor permeability of polylactic acid (PLA) was evaluated. The PLA-composites materials were characterized by X-ray diffraction, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and optical microscopy. For the composite preparation, an experimental design was established using two factors: additive type and concentration. When evaluating the water vapor permeability of the composites, it was found that the incorporation of kaolinite at 1% and 5% reduced the permeability coefficient of PLA. Furthermore, the inclusion of 5% kaolinite showed an increase on the tensile strength of the material. By contrast, the addition of rice husk produced an increase on water vapor permeability of the material and a decrease of both the tensile strength and ductility (percent of elongation at fracture). The higher dispersion and more regular morphology of the kaolinite particles could explain the enhancement of the gas barrier. A similar thermal behavior was observed for both PLA and composite materials, confirming that no damage of these properties was caused with the incorporation of the filler particles.